介绍了加氢装置气液分离器的工作原理。
The working principle of gas liquid separator for hydrogenated unit was recommended.
筛孔是沿气液分离筛板的外圆周均布的。
The sieve holes are distributed along an outer circumference.
然后进行的是气液分离器及缓冲器的设计。
Then what to carry on be the design which annoys the liquid separation machine and buffer.
与气液分离式计量相比，简化了分离工序，降低了成本。
Relative to segregation, it simplifies the separate calculation process and cut down the cost.
该结果为井下螺旋式气液分离的进一步研究提供了参考依据。
The results provides reference for further research of the gas liquid of down-hole.
针对常规离心式分离器进行结构改进，开发出新型离心式气液分离器。
Aiming at the improvement on the structural of the ordinary centrifugal separator, a new centrifugal separator for gas-liquid separation was developed.
为了提高离心式气液分离器的分离效率，需对其结构参数作进一步分析。
In order to improve the separating efficiency of the centrifugal gas-liquid separator, it is necessary to carry out a further analysis on the structural parameters.
为了减少气体对泵的影响，提高抽油泵泵效，研制了井下复合式气液分离器。
In order to reduce the influence of gas on pumps and improve the pumping efficiency, a combined downhole gas-liquid separator is developed.
在热泵系统四通换向阀后的排气管上加旁通毛细管和在气液分离器中加过冷管。
A by-pass capillary tube was added on the discharge pipe behind the four-way valve and a tube was added in an accumulator in a heat pump system to solve the problem.
空气压缩机气液分离滤芯，流向由外向内，真空泵气液分离滤芯流向由内向外。
Coalescing filters used in air compressors flow the outside of the element in while coalescing filters used in vacuum pumps flow the inside of the element out.
而组件单元装置是由框式中空纤维膜组件、框式换热组件、气液分离器组成的。
A unit device consists of frame type hollow fiber membrane units, frame type heat exchange units and gas-liquid separators.
轴流导叶式气液旋流分离器与其他离心式气液分离器比较，其特点是阻力损失小。
In comparison with other centrifugal gas-liquid separators, the resistance loss of the axial flow guide vane type gas-liquid cyclone separators was less.
气液分离装置分离出的闪蒸气原先送到火炬系统，但现在作为燃烧气返回锅炉机组。
The expansion gases from the gas liquor separation unit were originally sent to the flare system, but are now recycled as fuel for the boiler unit.
实践证明合理地设计及应用气液分离器，对提高空调产品的可靠性具有十分重要的意义。
Practice proved that design and apply the gas-liquid separator legitimately have a very important signification to improve the reliability of air conditioner product.
气液分离器：安装在排气管路上用以实现压缩气体与工作液的分离，分离器属压力容器。
Liquid-vapor separator: it is installed on the exhaust pipe line to separate the compressed gas from treatment fluid, the separator is a pressure vessel.
工业应用也表明，采用双层套筒出口结构的气液分离器具有较高的除酸雾效果，优于原分离器。
The industrial application showed that the mist swirl separator with the optimized exit structure had higher separation efficiency than that of the original design.
产品包裹干燥过滤器、气液分离器、油液分离器及各种冷风机、冷凝器用的风叶、网罩等系列。
Products including dry filters, steam fluid separation devices, oil separation devices, every kinds of cold wind machine, fan's leaf and net-caps used in condensers.
本实用新型公开了一种旋流立式气液分离罐，包括竖直放置的罐体和 安装在罐体底部的支腿。
The utility model discloses a rotational flow vertical type gas-liquid separating pot which comprises a pot body which is vertically positioned and landing legs arranged at the bottom of the pot body.
一种环隙气升式内环流反应器，涉及一种具有高气液分离效率和良好布气效果的内环流反应器。
The annular air-lift inner circulating reactor is one inner circulating reactor with high gas-liquid separating efficiency and excellent gas distributing effect.
多杯等流型气锚在气液分离的效果上明显优于普通的气锚，采用该气锚对脱气效率会有较大提高。
The multi-cup uniform flux gas anchor is obviously better than ordinary gas anchor on effects of separating gas from fluid, the degassing efficiency will be greatly improved by the kind of gas anchor.
通过流场分析可以看出，流场对称性很差，底流出口附近气体含量较多，说明气液分离效果不好。
The flow field analysis shows that the gas-liquid separating efficiency is not satisfied with the bad axial symmetry of the flow field and high gas content near the underflow outlet.
本实用新型涉及一种气液分离器，特别涉及一种用于轻工造纸行业中纸机湿部的真空脱水系统。
The utility model relates to a gas-liquid separator, in particular to a vacuum dewatering system which is applicable to the wet part of a paper machine in the light papermaking industry.
采用本系统，可以大大提高现场信号的实时监测，保证气液分离器顶部不翻塔、不跑液、底部不串气。
Uses this system, greatly enhanced the scene signal real-time monitor, guaranteed was mad the fluid separator crown does not turn the tower, does not run the fluid, the base not hernia.
本文提出了有关自吸式离心泵泵体及叶轮主要尺寸的设计公式，泵体储液室、气液分离室等的确定方法。
The artical presented Designing formulas of pump body and impeller and the-defining way of liquid storage chamber and air-liquid-isolating chamber of self priming type centrifugal pump.
在压缩机吸气口增加气液分离器是解决这个问题的有效办法，尤其是在采用逆循环热气除霜的热泵机组中。
In the compressor suction mouth increase a gas-liquid separator is the effective way to solve this problem, especially in the inverse heat cycle defrosting the heat pump units.
离心式分离器以其结构简单，加工制造容易，分离效率高，广泛的应用于固液分离、液液分离及气液分离中。
Centrifugal separator is used in solid-liquid separation, liquid-liquid separation and gas-liquid separation widely as its simple structure, easy to manufacture and high separate efficiency.
对丝网气液分离器的分离机理进行了详细分析，在此基础上给出了丝网气液分离器的分离效率和压降计算公式。
Based on the analyzing the separation mechanism of wire mesh demister, the formulae for calculating the separation efficiency and pressure drop of wire mesh demister have been proposed.
结果表明，用此简化计算公式计算的结果与试验数据基本一致，可以用于螺旋片导流式气液分离器螺旋结构设计计算。
The results show that the values from this simplified calculation formula is consistent to the test data and it can be used to design the spiral structures.
压水室采用导叶式结构能够尽快地把液体的动能转换为压力能，同时能够使泵腔内的流动更趋合理均匀，提高泵内气液分离的能力，并且能平衡叶轮径向力。
The volute of guide-vane structure can transform the kinetic energy to pressure energy as soon as possible, and improve the capacity of separating gas and liquid for the more balance flow in it.
压水室采用导叶式结构能够尽快地把液体的动能转换为压力能，同时能够使泵腔内的流动更趋合理均匀，提高泵内气液分离的能力，并且能平衡叶轮径向力。
The volute of guide-vane structure can transform the kinetic energy to pressure energy as soon as possible, and improve the capacity of separating gas and liquid for the more balance flow in it.
应用推荐