他有一根装着电极的管子,里面充满了氢原子。通过施加电压,他能够使气体发光。
He had a tube with electrodes potted in it filled with atomic hydrogen. And by applying a voltage, he was able to get the gas to glow.
该文以碳粉掺杂的聚合物为敏感膜,以叉指电极为基底制作了测定挥发性有机气体的化学阻抗传感器。
A chemiresistor sensor was fabricated for the analysis of volatile organic compounds(VOCs) with carbon black(CB)-polymer composite as sensing film and interdigital electrodes.
这是从教科书上复制下来的图表,这里有两个电极进来,这是气体管中的氢原子。
This is the diagram taken right from your text, there are the two electrodes coming in and this is atomic hydrogen in the gas tube.
它们强烈的、淡蓝色的光直接来自电极之间明亮发光的微小的等离子气体。
They get their intense, blue-tinged light direct from the tiny plasma glowing brightly between the lamp's electrodes.
当电子在电场加速时,电极就会获得能量,并在与气体原子和分子相撞时把能量传递给它们,这样就会产生发光的等离子气体。
As electrons accelerate in the electric field, they gain energy that they pass on to the atoms and molecules of the gas as they collide with them, creating a glowing plasma.
介绍一种新型三电极结构SO 2气体传感器的工作原理、结构设计及其关键制作技术。
The working principle, structure design and critical fabricating technology of a new type of SO2 gas sensor with three-electrode structure are introduced.
放电管:装有低压气体的封闭绝缘容器,当电极有足够的电压时,通过它电流就开始流动。
Discharge tube: a closed insulating vessel containing a gas at low pressure through which an electric current flows when sufficient voltage is applied to its electrodes.
电解通常同时在一个或两个电极上析出气体。
Electrolysis is usually accompanied by gas evolution at one or both electrodes.
在充满氙气的灯柱中的两个电极之间进行火花放电将产生“电离气体管”,电流通过该管流动,从而导致气体发光。
A spark discharge between two electrodes produces an "ionised gas tube" in the xenon gas-filled lamp piston through which electric current flows which in turn causes the gas to light up.
利用高电压来击穿其两电极之间的气体绝缘层,从而产生电弧的一种电火花点火设备。
Using the high voltage between the two electrodes to breakdown of gas layer, thus generating an electric arc ignition devices.
本文采用热压法制备了一种多孔气体扩散电极并对其进行了XRD表征。
In this paper, a gas diffusion electrode was made by hot pressure method and character by XRD.
分析了真空压力、射频功率、气体组合及其流量和电极温度对刻蚀速率、刻蚀剖面的影响;
The dependence of etching rate and profile on the vacuum pressure, RF pow-er, gas composition and flow rate, and electrode temperature is analyzed.
它可以被用来制作透明电极、压敏电阻、太阳能电池窗口、表面声波器件、气体传感器、发光二极管等。
ZnO can be used to fabricate transparency electrode, piezoresistor, cell battery window, surface acoustic wave device, gas sensor and light-emitting diode etc.
腔体厚度以及腔体和金属电极之间的绝缘气体层厚度的变化,对放电区的温度分布也会产生一定的影响。
Besides the above factors, the thickness of the metal crust and the insulated gas width between the crust and metal electrode will also affect the temperature distribution to some extent.
简述电化学电极气体氧分析器的计量检定方法及过程。
The method and the course of verification of electrochemical electrode gas oxygen analyzer was briefly described.
通过实验我们发现气流流速、电极烧蚀、绝缘筒污染等因素制约了高能、大电荷量气体开关的重复工作性能。
These experimental results indicated that several factors such as gas velocity, electrode erosion, insulator envelope pollution and so on limited the repetitive operating capability of the switches.
以硫酸水溶液-锌汞齐(汞电极)体系,实验研究了液-液界面上化学反应形成气体产物时气泡的生长规律。
The growth of gas bubbles on liquid-liquid interface is studied experimentally when gas forms through chemical reaction in sulphuric acid solution-zinc amalgam (or mercury electrode) system.
它可以被用来制作透明电极、压敏电阻、太阳能电池窗口、表面声波器件、气体传感器、发光二极管等。
ZnO thin films can be used to fabricate transparency electrode, piezoresistor, cell battery window, surface acoustic wave device, gas sensor and light-emitting diode etc.
研究了高功率气体火花开关电极烧蚀的基本物理过程。
The basic physical mechanisms of the electrode erosion process of high power gas switches were also studied.
电化学电极气体氧分析器计量标准的扩展不确定度小于5%。
The uncertainty of measurement for the standard of measurement of electrochemical electrode gas oxygen analyzer is less than 5%.
文章研究了电极结构,金属腔壁对工作气体的冷却作用和腔内的增益分布。
The electrode structure, metal wall action on the active medium cooling, and the gain distribution have been studied.
通过分别以催化剂层和纳米颗粒层分别作为底部电极和顶部电极,研究人员成功地设计了一个气体传感器并测试了其传感性能。
By employing the catalyst and nanoparticle layers as bottom and top electrodes respectively, the researchers successfully designed and tested a gas sensor.
简体中文标题:焊接消耗品。高强度钢气体保护电弧焊用焊丝电极、焊丝、焊条和沉积金属。分类。
English Name: welding consumables - wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification.
高电压无电极强脉冲气体放电,可以用作激光器的激发光源。
High voltage pulsed electrodeless discharge in rare gases can be used as a light source for laser excitation.
提出了工具电极超声振动辅助气体介质电火花加工方法。
Tool electrode ultrasonic vibration aided gas medium EDM technology was proposed and correspondingexperiment system was designed.
电极是多孔炭,可以让气体燃料(例如氢和氧)扩散至电池。
The electrodes are of porous carbon to permit diffusion of the gaseous fuels, e. g., hydrogen and oxygen, into the cell.
以锌空气电池气体扩散电极为研究对象,采用分层添加催化剂的方式研究了改变催化层位置对气体扩散电极放电性能的影响。
Take gas diffusion electrode of zinc-air battery for example and add catalyst by layers, we studied the effect of changing catalyst layer location on the performance of gas diffusion electrode.
新型陶瓷电极荧光灯(CPFL)的问世,成为气体放电光源领域的一项重要突破。
The Ceramic Pole Fluorescent lamp (CPFL), which has recently been invented, has made a great achievement in the field of gas discharge lamps.
还提供了一种利用这些气体扩散衬垫制备的膜电极组件和一种燃料电池。
A membrane electrode assembly prepared using these gas diffusion backing and a fuel are also provided.
还提供了一种利用这些气体扩散衬垫制备的膜电极组件和一种燃料电池。
A membrane electrode assembly prepared using these gas diffusion backing and a fuel are also provided.
应用推荐