引入了横截面形状修正因子，简化了公式的表达和计算。
And a shape factor is introduced into the expression, which simplifies the theoretical expression.
本方法适用于任意横截面形状和任意边界条件的薄壁杆件。
The proposed method is applicable for the thin-walled member of any cross section with any boundary condition.
本文主要分析了具有不规则横截面形状的薄壁结构在横向荷载下的稳定问题。
The main content of this thesis is lateral buckling analysis of thin-walled structures with irregular cross section by transformed 63 spline finite member element method.
刚性板结构由中间相连的中心腹板和固定桥梁横截面形状的外部边缘支撑系统组成。
The rigid plate construction consists of the central webs of the bridge meeting in the middle and a peripheral edge support that holds the cross-sectional shape of the bridge.
同时，讨论了泡沫材料相对密度和胞体支柱横截面形状对材料整体模量性质的影响。
The influences of relative density and the shape of strut cross-section on the modulus are also discussed at the same time.
凹坑的横截面形状和髓内针锁孔的横截面形状相同，横截面形状是圆形或者是椭圆形。
The cross section shapes of the pits are same with that of the lock hole of the intramedullary nail, which are roundness or ellipse.
通过试验研究了刀具法向前角、拉屑力和拉屑角等对纤维横截面形状和金相组织的影响。
Based on the experiment, the influences of tool normal rake, chip pulling Angle and chip pulling force on the shape and metallurgical structure of the fiber cross section are studied.
本发明还公开了带有钳口的钳口结构，所述钳口的形状适于限定对应于物体横截面形状的托架。
A jaw arrangement with jaws shaped to define a cradle that corresponds to a cross-sectional shape of an object is also disclosed.
无论哪种情况，楔形体的横截面形状要么是有两条边相同的球形四边形，要么是任意球形四边形。
Whatever the case, the shape of the cross-section of the said sphenoid part is either of an isosceles spherical trapezium or of any spherical quadrilateral.
介绍了影响聚合釜封头试样拉伸性能的因素：取样部位、取样方向和取样数量及试样的横截面形状。
Factors influencing the tensile strength of polymerizer head sample were introduced, which included the sampling position, sampling direction, sampling quantity and the cross section shape of sample.
本方法采用线性函数作为横截面翘曲位移的插值函数，适用于任意横截面形状和任意边界条件的薄壁杆件。
A linear function is used to express the warping displacements along the cross section of the thin-walled member.
利用非线性有限元法分析了密封条的压缩受力变形特性，根据结构力学原理对密封条横截面形状进行了优化。
Using nonlinear finite element method, the compression load deflection of the seal was analyzed and cross sectional shape of the seal was optimized.
学生要确定两个横截面面积相同而形状不同的铝梁实验样本的相对刚度，并研究结果如何与理论一致。
Students will determine the relative stiffness of two aluminum beam test specimens of equal cross sectional area but different cross-sectional shape and see how they conform to theory.
此可熔断元件恰当的形状和横截面使其可连续通过额定电流，而对于严重过负荷或短路，按规定的时间一电流特性而熔断。
This element is of proper shape and cross-section to carry rated current continuously and to melt in accordance with a specific time-current characteristic on heavy overload or short circuit.
这将是该碟的横截面一般形状。
This will be the general shape of the saucer's cross section.
套筒的内部被成形为与管子(12)的横截面相符合并且其外面具有非圆形形状。
The inside of the sleeve is shaped to match the cross section of the tube (12) and the outside has a non-circular shape.
新副翼的形状在总体上保持不变，不过在其末端的横截面积却变小了。
The new flap keeps essentially the same profile, but with a reduced cross sectional area at its extremities.
如土壤类型，衬里这种事（如有），横截面面积和形状都影响损失。
Such things as soil types, linings (if any), cross-sectional area and shape all affect losses.
仿真结果表明，该实时监测算法可以清楚地刻画出橡胶坝横截面的形状，且可以有效地监测橡胶坝参数。
Simulation results show that the developed real-time monitoring algorithm can distinctly depict the figure of the rubber dam and effectively measure the state parameters of the rubber dam.
作为例子计算了一些等离子体横截面的形状。
Several cross sections of the plasma have been given as examples.
提出了一种新型的非圆轴数控加工系统，用于横截面为非圆形状的轴类零件加工。
A new kind of NC system for machining shafts with non-circular cross-section is proposed in this paper.
其主要特点是：由被切型材横截面决定其切削刃形状的刀具被安装在转动轴上，随转动轴转动。
The utility model is characterized in that: the transverse sections of shaped sections to be severed determine that the edged cutting tools are fixed on the rotation axes and rotate along.
本文以肱骨横截面CT图像为解剖学基础，提取骨端面的几何形状，进行三维重建，建立肱骨的三维有限元模型。
Based on ct picture, the geometrical dimensions of humerus were obtained. A three-dimensional finite element model was established on the basis of three-dimensional reconstruction.
结果表明：可以通过改变钻头横截面轮廓来得到不同的刀具几何形状，适用于不同的加工条件。
Result shows that different cutting edge can be got by changing DCSP according to different cutting condition.
这样的机器制造物体是每次打印一层薄液体树枝，并用电脑控制紫外线将其固化为要求的横截面的形状。
The build tray then descends, a new liquid surface is applied and the process is repeated.
这样的机器制造物体是每次打印一层薄液体树枝，并用电脑控制紫外线将其固化为要求的横截面的形状。
The build tray then descends, a new liquid surface is applied and the process is repeated.
应用推荐