阐述了编译器的设计原理和编译模式。
Design principle and compiling mode of compiler are expounded.
阐述了三种处理模式的原理和工艺设计参数。
The principle and technique design parameters of every model were expounded.
通过对患者生理及心理状况、行为模式的分析，运用人机工程学原理，对病房布局、病房规模、病房空间和设施进行人机分析，得到一套病房环境设计的基本参数。
A set of basic parameter about ward environmental design are gained in term of analysis of patient physiological, psychological condition and behavior pattern based on ergonomics principal.
阐述了该系统的选型原理、方法、系统结构、专家知识表示、知识库设计以及推理模式和可信度传播等问题。
The principles of selecting the type, methods, system structure, representation of expert knowledges, design and inference model of a knowledge base and spread of level are discussed.
基于对以上技术原理的研究，设计和开发了C/S模式的发电企业运行管理信息系统。
According to the research for the above technique principle, operation management information system with C/S mode for power generation enterprise was designed and developed.
论文系统地研究了DC/DC转换器的工作原理和控制模式，为XD1124的设计提供了理论指导。
This paper analyses the basic principles and control modes of DC/DC converter, which is the theory guidance of the design and the implementation of XD1124.
结合当代建筑的实例，概括出应用这种原理具体的设计模式和方法：天井中庭、太阳能烟囱、呼吸式双层幕墙和环境风塔等。
With several instances in modern architecture, the paper summarized the specific designing mode and method by using this principle in the modern architectural creations such as .
阐述了全村总体型和家庭生态型二种建设模式的基本原理与设计原则，并详细介绍了城郊型生态村，山区型生态村，庭院型生态村模式。
The article also exemplifies the basic theory and design principles of two construction models and introduces in details the eco-village models of countryside, mountainous areas and courtyard.
简要分析了峰值电流控制模式升压变换器的不稳定性及其原因，阐述了斜坡补偿的基本原理和设计问题。
Instability and reasons of peak current controlled BOOST converter are simply analyzed, basic principles of slope compensation and design problems are also expatiated.
详细阐述配送中心的储运单元设计、总体规模与能力规划、储区与储运模式规划、工艺流程设计以及基于EIQ - PCB的储区能力规划等原理和方法。
The basic storage unit design, the overall capacity planning, storage area planning, process flow designing, and storage area capacity planning based on EIQ-PCB etc are expounded.
描述该数据交换机制中的时间闸和放行令牌技术，包括其主要设计目标、类型、数据结构、基本工作原理和模式以及相关数据交换处理流程。
The design goal, type, data structure, basic working principle and mode as well as the related process flows of time gate and passing token are discussed.
本文研究了有源功率因数校正技术中的临界导通模式的基本原理，并对其中的电压基准源和模拟乘法器做了详细的分析和设计。
In this paper, we studied on critical current mode active Power Factor Correction technology, and did a detailed analysis and design on voltage reference circuit and analog multiplier circuit.
本文详细介绍了基于F PGA的呼吸机SPONT 模式控制芯片的设计和实现，包括原理和电路结构图。
This paper introduces in detail the design and implementation of ventilator SPONT control chip based on FPGA, including principle and electric circuit.
在详细分析DES的基本原理和应用模式的基础上，结合DES硬件实现的特点，采用正向设计的方法实现了适用于IC卡等有嵌入式安全需要的系统中的DES模块。
On analysis of the principle and application mode of des, a des module which fits for embedded security system such as IC card is realized by topdown design methods.
在对语音芯片ISD1420深入实验研究的基础上，介绍了芯片工作模式和电气原理设计方法。
The phonetic chip ISD1420 has been carefully researched, and the chips working mode and basic circuit diagram are both described in the paper.
并且在剖析与设计入程中，应用设计模式的原理，提高所设计的软件的可重用性和可维护性。
And in analysis and designing process employ design pattern principle, raise design software reusability and maintainability.
文中首先对模糊控制和遗传算法的基本原理进行了介绍和探讨，内容主要包括：模糊控制的数学基础、常规模糊控制器的设计、遗传算法的基本操作以及模式理论等。
Firstly, fuzzy control and GA is introduced and discussed, such as the Mach base of fuzzy control, the design of conventional fuzzy controller, the basic operation of GA and schemata theory and so on.
本论文从ERT技术的原理性研究出发，针对该技术中电极结构设计进行了分析与优化，并对单电极电流激励模式做了深入的研究和优化。
In this paper, the electrode structure and single electrode current exciting mode are deeply analyzed and optimized by the fundamental study of ERT technology.
对其工作原理进行分析，给出不同工作模式下的等效电路图和回路的参数设计原则。
The equivalent circuits at different operation modes, the analysis of the circuit and principle of parameter design were presented.
简要的介绍了MVC模式的基本思想，基于MVC设计模式的管理信息系统工作原理。然后结合新生学籍注册管理信息系统的具体功能模块讨论了该系统在MVC模式下的设计和实现。
The basic theory of MVC pattern and the working process of MIS of the status of new student information management system is introduced and then talk out the MIS based on MVC model.
简要的介绍了MVC模式的基本思想，基于MVC设计模式的管理信息系统工作原理。然后结合新生学籍注册管理信息系统的具体功能模块讨论了该系统在MVC模式下的设计和实现。
The basic theory of MVC pattern and the working process of MIS of the status of new student information management system is introduced and then talk out the MIS based on MVC model.
应用推荐