实践表明,合理的模具系统可以制备出合格的金属基复合型材。
The practice shows that high quality MMCs wires can be produced by well designed mold system .
系统实现了常见客车弯曲件的模具系统的设计:从零件的工艺计算、回弹重建到模具系统的结构设计、装配等;
The design of the die system of the carriage bending parts is realized: from technical calculating and spring-back rebuilding of die parts to structure design and assembling of the die system, etc;
本文论述了锡黄铜焊丝连续挤压工艺的可行性、成本和理论基础,介绍了连续挤压工艺的方案以及挤压模具系统的设计。
The feasibility, cost and theoretic basis of the continuous extrusion process for producing tin brass weld wire are studied with its technological process and the design of extrusion dies introduced.
产品包括泵、真空包装填充机、研磨机、分配机、制作台、倾卸机、装桶机、模具系统、热加工系统、储存罐、储料器、充填机、切片机和切丁器。
Products include Pumps, Vacuumizing Stuffers, Grinders, Portioners, Racks, Dumpers, Vats, Mold Systems, Thermal Processing Systems, Tanks, Hoppers, Fillers, Slicers, and Dicers.
最简单的支架系统将承受模具的静载荷,且将这些载荷集中在一些载荷点上。
The simplest framing system supports the dead weight of the mold and concentrates it on a few load points.
尺寸数据都来自于《模具设计与制造简明手册》,因此,本系统可以看作是一个数字化的压铸模具设计手册。
Because all dimension data comes from "simple handbook of die design and manufacture", the system can be regarded as a digitized design handbook about die-casting dies.
在上述研究成果的基础上,作者以J2EE为开发平台,采用MVC框架结构,开发出了一套注射模具报价系统。
Based on the above-mentioned research, a quotation system for Injection Mould has been developed on J2EE by adopting MVC as the framework.
该系统能够根据用户提供的产品尺寸,自动绘制制品的产品图和模具图。
It can draw product drawing and die drawing automatically according to the product size provided by the user.
本公司成立于2006年,主要从事模具及液压系统方面的设计和生产。
The company was established in 2006, mainly engaged in mould and hydraulic systems, the design and production.
热流道系统与模具配合部分减少,气路、油管、冷却采用管道连接,模具设计加工更方便、更简单;
The matching areas of hot runner system and mold are reduced and pipe connection is adopted for pneumatic / hydraulic & cooling which make mold design and machining simpler.
注塑模具的冷却系统对塑料件的质量有至关重要的影响。
The cooling system of injection mold has significant effect on the quality of the plastic parts.
我们充分利用CAE模流分析技术,模拟和优化模具浇道系统设计,提高零件的质量和减少试模次数及不必要的浪费。
We make full use of CAE mold flow analysis techniques, simulation and optimization of mold runner system design, improve part quality and reduce the number of test mode and unnecessary waste.
分析了铝合金端盖压铸件结构工艺性特点,介绍了压铸模的浇注系统及模具结构设计。
The structural characteristics of aluminum alloy cover was analyzed, and the design of pouring system and die-casting die structure were introduced.
论文论述了传统分析方法所存在的缺陷,以及应用面向对象分析于模具CAD系统解决我们所面临的问题。
This paper has described the disadvantages of traditional analytical method. Object-Oriented analysis has been applied in the system analysis of Die CAD system for solving questions.
本文介绍了基于实例推理的智能冲压模具CAD系统的开发及功能特点。
This paper deals with the development of intellective stamping die CAD system based on CBR.
模具CAD系统,作为提升模具设计效率和质量的手段,也就日渐受到重视。
The mould CAD system, as a tool to raise the design efficiency and die quality, has been attracting more and more attentions.
本文详细介绍模具热流道系统应用与选择注意点。
This paper particularly introduces the notices of application and selection of mold's heat runner system.
构建的基于代理机制的模具工艺分析系统是模具工作流管理系统的一个组成部分。
A mold technologic analysis system base on agent theory is developed. This agent is a part of the mold workflow management system.
介绍了汽车覆盖件模具CAPP系统的功能和结构,提出了在开发模具CAPP系统中需要注意的一些问题。
Through the introduction of the frame and function of CAPP system about die of automobile cover parts, bring forward some questions when exploiting the system.
为保证研磨质量和提高研磨工作的效率,进行了研磨工具的选用分析,从而集成了辅助模具自动研磨系统实验平台。
For ensuring the grinding quality and efficiency, the selecting of different grinding tool to different surface is analyzed and the mold-assisted grinding system was successfully developed.
本系统是专门针对挤压铝型材的辅助设计而开发的一套综合应用系统,包括产品辅助设计系统和模具辅助设计系统。
The general and applied system is for the aided design of extrusion aluminum-type materials including aided design system of products and moulds.
注塑模具冷却系统对于提高模具的设计制造水平和制品的质量是非常重要的。
The injection mold cooling system design is very important to improve the mold design and manufacture of standard and quality of products.
介绍了模具成本信息管理系统的设计原理和编程方法。
The design and development of cost management are introduced for panel die manufacture.
文章介绍了合弄建模的方法和原则,并结合模具车间生产的特点建立了基于合弄的模具车间管理系统的框架结构。
Introduce the methods and principles of Holon model, combined with the character of mould workshop product, construct the framework of mould workshop management system base on Holon.
针对目前模具CAD系统存在的问题,本文提出了研制通用高效模具CAD系统的新思路,并就具体的关键技术进行了详细探讨。
Aiming at solving the problem in current die CAD, this paper proposes a new idea developing universal and efficient die CAD system, and probes into the key techniques in detail.
为使模具设计人员提高产品设计效率,建立了基于网络的注塑模具设计资料查询系统。
For improving injection mold design efficiency, the design materials query system about the injection mold is created in the system.
为了解决现有模具CAD系统存在的问题,提出了开发通用高效模具CAD系统的新思路,并针对其关键技术进行了研究。
Aiming at solving the problems in current die CAD, this paper proposes a new idea for developing universe and efficient die CAD system and discusses the key technique in detail.
为此,提出了特许连锁模具制造网格这一模具制造系统的新模式。
Just for these, the franchising manufacturing grid of mould, a new model of mould manufacturing system is put forward.
为满足航空发动机涡轮叶片精铸模具设计、制造、叶片铸件检测流程对信息集成的需求,提出构建精铸模具集成设计系统平台。
An integration system is set up to meet the need for information integration in the process of mold design and manufacture and detection of aero-engine turbo blade by investment casting.
为满足航空发动机涡轮叶片精铸模具设计、制造、叶片铸件检测流程对信息集成的需求,提出构建精铸模具集成设计系统平台。
An integration system is set up to meet the need for information integration in the process of mold design and manufacture and detection of aero-engine turbo blade by investment casting.
应用推荐