去年10月，成功地轧出了第一批低合金槽钢。
Last October the first batch of low-alloy channel steel was successfully rolled.
机体多由碳钢板材或槽钢制作而成。
盘柜外壳和基础槽钢应可靠的接地。
本文研究的重点是槽钢剪力连接件。
The research emphasis of this paper is on channel shear connectors.
吊笼由角钢和槽钢焊接而成。
The suspension coop is welded by the Angle steel and channel steel.
该机底座采用槽钢，机体采用钢板焊接而成。
The machine USES the base channel, and the body with steel plates welded together.
该机底座采用槽钢，机体采用钢板焊接而成。
The base of the machine adopts a channel steel and the body adopts welded steel plate.
安装主要材料：各种型号的槽钢、角铁及铁板。
Main mate rial for installing: all kinds of channel steel Angle iron and plate iron.
安装主要材料：各种型号的槽钢、角铁及铁板。
Main material for installing: all kinds of channel steel, Angle iron and plate iron.
基础槽钢的水平度、平直度应满足设计和规范要求。
The levelness and straightness of the foundation channel steel should accord with the design and specifications.
机架采用槽钢作为主梁，中间加加强筋板焊接而成。
The rack USES the channel steel to take the main body, the middle with stiffener board welded together.
底座由钢板与槽钢焊成，用于支撑壳体及传动装置。
Base from steel plate and welded into a channel for supporting the shell and gear.
机架：板型槽钢与钢板焊接而成。表面油漆颜色为绿色。
Frame: plate type channel steel welded with green paint color. Surface.
介绍一种考虑薄壁槽钢受压局部屈曲后强度的有效宽厚比法。
Introducing the method of effective ratio of width to thickness by considering post buckling strength of channel sections in press.
以冷弯型钢中的槽钢为例，分析了其辊弯成型的特点及变形规律。
Based on the cold roll forming steel, its characteristic of roll-forming and deforming rule was analyzed.
表面处理形式、状态；支撑梁的截面尺寸和位置，槽钢的开口方向。
The size and position of the cross section of support beam, the opening direction of beam channel.
我公司成立于2001年，主要生产角钢，槽钢为主，技术力量雄厚。
I was founded in 2001, the main production Angle, the main channel, and strong technical force.
4梯梆为槽钢式设计，抗弯曲性能虽然优于第一代，但依然不够理想。
4th ladder coconut palm for channel steel type design anti - curving performance although surpasses the first generation , but still insufficient ideal.
介绍了双焊缝方矩形钢管生产技术的特点及冷弯等边槽钢孔型设计参数。
This paper introduces the producing and technology characteristics of the square and rectangular double-welded seam pipe. And designing of the pass parameters of the cold-bent channel steel.
该项技术应用于轻型槽钢的轧制时，技术上的优越性更加充分地显露出来。
When applied on rolling light channel steel the superiority in technique is more obvious.
天津润江鑫钢铁有限公司介绍：本公司主要经营角钢，槽钢，工字钢，等。
The day moistens and enriches the river Xin steel and iron Limited company to introduce: This company mainly manages the angle steel, the channel steel, the I-steel, and so on.
底板是以槽钢焊接成框架，钢板为面板的平板结构，其尺寸与模框相对应。
Channel bottom is welded into the frame, steel structure for the flat panel, and its size corresponds with the mold box.
介绍了等边槽钢冷轧过程中的技术特点及其轧制条件，以及轧辊的设计参数。
It introduces the technical traits and cool rolling conditions of equal canal steel cool rolling process, and the roller designing parameter.
研究了柱加劲肋、螺栓排列、螺栓数目、槽钢宽度和槽钢下伸长度等的影响。
Effects of column stiffeners, bolt arrangement, bolt number, U-steel width and U-steel extended length are studied.
而翼缘非全部有效的卷边槽钢、Z形钢毫无对称性，使应力分析计算十分复杂。
Lipped channel and Z section with compression flange not fully effective, have no more any symmetry, so that their stress analysis become quite complicated.
上机使用后，轧辊使用寿命提高50%以上，同时提高了槽钢产品的产量和质量。
The roll service life enhances above 50% by putting them into use, simultaneously raised the channel steel product output and the quality.
本文详细介绍了槽钢锁口一次冲压成型模具结构的特殊性，定位方式及受力分析。
This paper introduces the construction speciality, positioning method and stress analysis on primary pressing model of the bar cut.
二十世纪初期制造商们就已用钢管、角铁以及槽钢之类的材料建造温室的上部结构。
Manufacturers of the early 1900s were using steel pipe, angle or channel for the greenhouse superstructures.
现槽钢规格品种齐全，保证全省最低价，常备库存8000吨，年销售钢材3-4万吨。
The channel steel varieties complete specifications, the lowest price guarantee, standing inventory of 8000 tons, annual sales of steel 3-4 million tons.
整机机架，工字钢、槽钢、厚壁方管、厚壁钢板、墙板等就采用优质Q235-A钢材。
The machine frame, beams, channels, thick wall square tube, thick wall plates, wall plate is USES the high quality of Q235-A steel.
应用推荐