• 并结合一个应用实例说明cad系统应用。

    An example shows the application of the CAD of cold extrusion die for slot wedge.

    youdao

  • 双向玻璃纤维引拔具有经纬双向强度性能更好

    The bidirectional glass fiber drawing groove wedge has both longitudinal strength and latitudinal strength, and better thermal state performance;

    youdao

  • 介绍一种基于虚拟仪器大型发电机槽楔松动数字化声学检测系统

    This paper introduces mainly a digital detecting system of looseness of stator wedge in a generator based on virtual instruments.

    youdao

  • 工矿机电配件厂占地8主要生产液压、磁性槽楔等,产品畅销

    The Factory covers an area of 8 mu. Its main products are series of hydraulic pressure valves, which has a very broad market.

    youdao

  • 松动脱落可能划伤转子绝缘定子绝缘,造成定子线棒主绝缘击穿。

    The loosening and dropping out of slot wedges may damage insulation of rotor and stator to cause stator insulation breakthrough.

    youdao

  • 试验中用“磁带测量转子电流,并用有限元计算了转子涡流

    The current of the rotor slot wedges are measured by magnetic test coils, and the eddy-current field of the rotor are calculated by finite element method.

    youdao

  • 各向异性导磁复合材料制备磁性槽楔用导磁复合材料发展趋势

    Anisotropic composite magnetic materials were the trend of the composite magnetic materials used for motor slot wedges.

    youdao

  • 分析异步电动机中采用磁性可以减少损耗原因以及采用后的节能效果

    The analysis on the cause and effects is made about asynchronous motors using magnetic wedge for reducing Energy loses.

    youdao

  • 定子电动机内部一种绝缘材料通常人工机械方式打入定子内。

    Stator shafts wedge is an insulation material within the electric motors, usually by manual or mechanical means into stator.

    youdao

  • 力学物理性能均能满足服役条件苛刻汽轮发电机组转子要求

    The mechanical and physical properties can meet the requirements of the turbogenerator rotor slot wedge in harsh terms.

    youdao

  • 针对使用波纹大型发电机定子固定结构实验室建立了槽楔松动模型

    An experimental model is established in the laboratory to simulate the fixture structure of stator bars of large generators.

    youdao

  • 介绍磁性种类特点以及磁性槽楔电机节能方面的原理实际作用

    The article briefed The category and feafures of magnetic slot wedge, as well as the principle and practical effect of magnetic slot wedge in the energy-saring of generator.

    youdao

  • 应用表面阻抗输入阻抗概念,分别计算实心转子铁心与非磁性金属的一阻抗。

    Using the surface impedance and the input impedance respectively, the impedance per phase for the solid rotor steel and the non-ferrous metallic slot wedges is calculated.

    youdao

  • 只要合理地确定结构参数绝缘拼接式磁性不但提高电机效率,还能提高电机负载能力

    It is shown that the spliced insulation magnet slot wedge can raise the efficiency and load bearing capacity of electric machine if the structure and parameters are reasonably defined.

    youdao

  • Q Y聚酰亚胺漆包线绝缘槽楔、绝缘套管、接线浸渍均需采用H级绝缘的材料。

    QY polyimide enameled wire, slot insulation, slot wedges, insulation casing, primer wire and impregnating varnish must be used, such as H-class insulation material.

    youdao

  • 提出一种绝缘拼接磁性结构分析了这种槽楔电机的齿谐波、齿间漏、涡流的影响

    The paper presents a structure for spliced insulation magnet slot wedge, and analyses its influence on slot harmonic, magnet and eddy current.

    youdao

  • 为了提高微电机类零件模具设计效率质量降低设计人员劳动强度需要开发相应的模具CAD系统。

    For improveing die design efficiency and quality like slot wedge in micro motor, reducing the labor input, it needs to develop the CAD of die for slot wedge.

    youdao

  • 与并铁磁材料(90)口处设置定子(70)以便固定定子线圈(60),定子铁芯(40)转子铁芯(10)之间

    Meanwhile, a stator slot wedge 70 is arranged in the non ferromagnetic material slot 90 opening to fix the stator coil 60, air gap is provided between the stator core 40 and the stator core 10.

    youdao

  • 插板上推动三角一侧,使板料向前运动,达到板料定位自动送料目。

    The surface of inclined wedge pushes the triangle side of the waste and makes the plate move ahead, thus meeting the re.

    youdao

  • 通过有限单元计算优化设计确定锯片齿形前角、后角、圆弧半径合理原则及其参考值

    Principles of reasonable values and reference data of saw tooth's rake, relief, wedge angles and radius of bottom arc can be determined through finite element method of calculation and optimum design.

    youdao

  • 推动边的三角一侧使板料向前运动,达到板料定位自动送料的目的。

    The surface of inclined wedge pushes the triangle side of the waste and makes the plate move ahead, thus meeting the requirement of position setting and feeding the plate automatically.

    youdao

  • 本文介绍偏心式种新型内孔挖刀具结构原理

    The structure and principle of two new types of cutting tools (bevel wedge type and eccentric type) for boring O-ring grooves have been introduced in this paper.

    youdao

  • 其中,所述刀片组件所述可以收容对应中,使得所述板状刀片的切削部分从所述开口突出;

    In addition, the blade assembly and the wedge can be accommodated in the groove such that a cutting portion of the blade projects towards the opening.

    youdao

  • 其中,所述刀片组件所述可以收容对应中,使得所述板状刀片的切削部分从所述开口突出;

    In addition, the blade assembly and the wedge can be accommodated in the groove such that a cutting portion of the blade projects towards the opening.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定