第二个棱体是悬挑的木质立方体,下方有一个露台。
The second prism is a cantilevered wooden cube, which generates a terrace underneath it.
第一个棱体由黑色金属结构组成,一端对着素混凝土主体。
The first prism consists of a black metal structure that ends on an exposed concrete staple.
下游面则由坝顶护至排水棱体,无排水棱体时则护至坝脚。
For those downstream, they protect the space from dam crest to draining prism or to dam heel in event of no prism.
主要型式有棱体排水、贴坡排水、褥垫排水和综合式排水等。
There are drainage prism, drain on embankment slope, blanket drainage and comprehensive drainage.
与传统方法相比,该方法测量的结果中包含了多面棱体与其轴座的配合间隙的影响。
Comparing with traditional method, the result of measurement in this method contains influence of cooperated clearance between the regular polyhedron and the axle stand.
以平行光管和23面棱体为基准,得到存在偏心误差的一组光栅角编码器测量数据。
With a collimator and a 23 polyhedron as measuring datum, a set of optical angular encoder measuring data, which containing the eccentricity error, was obtained.
仓鼠有一对不竭生长的门牙,三对臼齿,齿型为:1 0 0 3,成交错摆列的三棱体。
Hamster has a pair of continuously growing incisors, three molar, tooth type : 1003, into a staggered triangular body.
棱体排水的顶部高程应超出下游最高水位,应大于波浪沿坡面的爬高,且不小于下列0.5米。
Its top elevated level must exceed the highest water level downstream, be higher than the wave runup along the slope, and be no less than 0.5 meters.
CXF卧式系列数控车方机床能够高效率、高精度地完成车削多棱体及四方、六方等多面工件的加工。
The CXF horizontal series of CNC machine can turn and mill polyhedron and contrate parts with high efficiency and precision.
CXF卧式系列数控机床能够高效率、高精度地完成车削多棱体及四方体、六方体等多面工件的加工。
The CXF horizontal series of CNC machine can turn and mill polyhedron and contrate parts with high efficiency and precision.
一个正方体的棱长是5厘米,它的所有棱长之和是多少厘米?
The length of a cube is 5cm. What's the sum of all its edges ?
数值结果表明:与传统方法相比,该方法可以提高棱边散射体的计算精度。
Numerical results suggest that the method presented can improve the accuracy of computation for scatterers with edges.
容矿角闪质糜棱岩中金与钯关系研究结果不支持金矿质直接来自于矿体附近的角闪质上壳岩包体说法。
Relationship of palladium and gold in the mylonite reveals no evdence to support direct source of Au ore materials from the upper crustal amphibolitic rock inclusions.
棱形细胞一般有两个突起,分别从胞体两极发出;
The fusiform cells stretched out two processes from their somas at two poles.
针对传统的抛物线算法在计算棱边散射体时误差较大这一问题,本文引入了一致性绕射理论对其进行修正。
To eliminate the obvious error resulted by the scattering analysis of scatterers with edges by traditional PE method, Uniform Theory of Diffraction was presented to solve the problem.
强蚀变糜棱岩即为金矿体及金矿化体。
Strongly altered mylonite is gold orebody and gold mineralized body.
摘要在基本几何体的范畴内,提出一种以棱圆为导元素的直纹曲面。
A ruled surface of revolution formed by an edged circle as the guide element is proposed in the category of basic geometrical bodies.
在基本几何体的范畴内,提出一种以棱圆为导元素的直纹曲面。
A ruled surface of revolution formed by an edged circle as the guide element is proposed in the category of basic geometrical bodies.
最后用三棱柱、六面体的混合单元的棱边有限元法求解了一个三维涡流场的算例。
At last, the mixed elements of prism and hexahedron are used to compute a three dimensional eddy-current problem.
北京周口店地区房山岩体周围,分布有一套由片麻岩、斜长角闪岩、混合岩、糜棱岩等组成的变质杂岩。
In the area of Zhoukoudian, Beijing, there is a metamorphic complex compo-sed of gneiss, amphibolite migmatites and mylonites, along with the Fangshan intrusive body.
提出一种以从平面体三面投影中“提取”顶点、棱线和棱面三维信息为基础,得出平面体“构型”的计算方法。
Based on the 3d data of vertex, edges and planes, which are obtained from the tri Angle projection of a plane body, the calculation method of the plane body formation is hence worked out.
很明显,对我们而言,第一眼看去,我们就想在项目中传递地形的优势。 方棱的玻璃体块,与疏松多沙的黄土取得平衡……真是让人着迷的对比。
For us, it was obvious from the very first sight that we wanted to transmit the formative terrain edge in this project.
这个正方体的棱长最大是多少厘米?
在积木拼块中,至少包括一种是多边形柱体拼块,该拼块的每一侧边上设有可与主壳体凸棱相楔合凹槽,或设有可与主壳体凹槽相楔合的凸棱。
At least one kind of building block is polygon prism blocks which have grooves to fit for the protrusive arris or have grooves to fit for protrusive arris on the main shell body.
就用这两个长度的线段作立方体的棱,能做多少个不同的立方体?
Using just these 2 lengths as the edges of the cuboids how many different ones can you make?
本文用四面体棱单元三维有限元方法计算一台28V,35a汽车用爪极发电机负载特性。
In this paper, calculation of load performance of a 28v, 35a claw-pole alternator is presented using three dimensional finite element method with tetrahedral edge elements.
所制作得到的风管为由左右风管板和上下风管板围成的棱弧形管状体。
The blast pipe produced is a arc tube encircled by the left and right blast pipe board and the top and bottom blast pipe board.
公司简介上海棱胜工贸有限公司是一家集科、工、贸于一体的中日合作型企业。
Introduction Shanghai LongSun engineering & trade co. , Ltd is the enterprise integrating technology, engineering and commercing.
公司简介上海棱胜工贸有限公司是一家集科、工、贸于一体的中日合作型企业。
Introduction Shanghai LongSun engineering & trade co. , Ltd is the enterprise integrating technology, engineering and commercing.
应用推荐