这种x物质必须是以能量的形式存在，其数量可以根据引发的效应理论计算出来。
That something must be a form of energy, and the amount needed to have the observed effect can be calculated.
首先通过实验测量和理论计算得到波浪崩破时的速度场，然后根据该速度场利用VOF法计算波浪破碎后的波高值；
Based on experimental analysis and theoretical calculation, the wave velocity field has been obtained, which is used to calculate the wave height after breaking by VOF (Volume of Fluid) method.
根据动力学计算理论，提出一种新的方法来修正跳车法实测频率，以获取较准确的自振频率。
According to dynamics computation theory, this article proposed one new method revises jumps off the law actual frequency, gains the accurate base frequency.
根据推力轴承磨损规律和可靠性理论，导出了推力轴承磨损的可靠寿命计算的数学模型。
Based on the wear law and reliability theory of the thrust bearing, the mathematical model of reliability life calculation on the wear of the thrust bearing is derived.
本文根据机轮摆振的点接触理论，导出了为克服摆振所需线性阻尼的计算公式。
In this paper the formula of requisite linear damping for overcoming shimmy is derived according to the point contact theory of wheel shimmy.
支撑矢量机是根据统计学习理论提出的一种新的学习方法，即使用核函数在高维空间里进行有效的计算。
The support vector machine is a novel type of learning technique, based on statistical learning theory, which USES Mercer kernels for efficiently performing computations in high dimensional Spaces.
本文根据模糊数学理论，建立了计算机性能评价的指标体系，并给出计算机性能评价与分析的多属性模糊决策方法。
Based on fuzzy sets and its theory, the index system of the performance analysis and evaluation of computer system is established in this article.
提出了根据凸轮的测量数据，通过计算机分析处理，找出推杆从动件的运动规律，获得凸轮的理论轮廓曲线的方法。
Based on the measured data of a CAM, the computer can analyze and find out the movement regularity of the CAM follower lever, thus obtaining the theoretic profile of the CAM.
根据弹性薄板大挠度理论，运用加权残值法分析计算幕墙玻璃的挠度和应力，并与幕墙玻璃规范设计进行比较，结果表明，基于非线性理论的设计计算是可行的。
On the basis of elasticity of the large-deflection thin penal, the method of weighted residuals is applied in calculating the stress and deflection of the curtain-wall glass.
然而，根据计算学习理论第，计算学习理论是一个领域，是机器学习相关。
However, according to the computational learning theory article, computational learning theory is just a field that is related to machine learning.
根据实例计算及理论推导，分析讨论了在评定精度中顾及起算数据误差的有关问题。
On the basis of calculating examples and proving the theory, this paper analyzes some questions of attending to the original data errors in evaluating precision.
分析了腔镜反射率、量子阱数等参数对阈值电流、输出光功率的影响，并根据理论计算对器件参数进行了优化设计。
The effects of DBR reflectivity and well Numbers on threshold current and output power of bottom-emitting VCSELs were analyzed to design an optimal device structure.
根据熵理论计算各评价指标的权重，用置信度识别准则进行等级判定，得出预测结果。
The weights for indexes were calculated by entropy weight theory, and the result of coal seams outburst risk prediction can be obtained according to credible degree criteria.
根据波动理论，满足随机响应工程计算精度要求的有限元网格大小与待求高频随机响应问题的频率范围上限有关。
According to wave motion theory, finite element mesh size satisfying the needs of engineering calculating precision is relevant to the upper limit of frequency range of random (response) problems.
抗风计算程序，通过了实例分析验证。根据该理论分析和计算，本文对大跨度悬索桥的静力抗风研究提出了新的。
Wind computer program is verified by a case study. According to the theoretical analysis and computation, this paper static long span suspension bridge study proposes a new wind.
根据一阶最优化计算理论，构建了采用液压同步提升技术进行转体施工拱桥的优化有限元模型。
Based on first-order optimization calculating theory, authors established the optimal finite element model of swivel construction of arch bridge adopting hydraulic sync elevation technology.
本文提供了一种根据升力面理论计算螺旋桨桨叶表面压力分布和螺旋桨性能的数值方法。
A numerical method is presented for prediction of propeller performance and pressure distribution on blade surface according to lifting surface theory.
再根据晶体大小分布理论（CSD），计算出斜长石的晶体生长速率、成核密度及成核速率等岩浆结晶动力学参数；
On the basis of the crystal size distribution (CSD) theory, the growth rates, nucleation density and nucleation rates of plagioclase have been worked out.
根据理论模型计算了纵模限制因子、阈值增益、光增益、输出功率等特征参数。
We calculated longitudinal confinement factor, threshold gain, optical gain and output power etc through theoretical model.
应用数值分析和计算几何理论，根据船体首部线型特点，建立首柱轮廓线数学模型；
Applying theories of numerical analysis and higher geometry, the corresponding mathematical model of stem line is established according to different stems.
根据损耗的统计理论，仔细地计算了每周过剩损耗。
According to the statistical theory of power loss, the excess loss per cycle has carefully been calculated.
根据提出的可靠度计算理论和方法，编制了基于一次二阶矩和JC法的可靠度计算程序。
Secondly, the procedure of tunnel lining based on First Order Second Moment(FOSM) and JC method is presented to calculate the reliability of tunnel lining.
最后根据配网的特点我们提出，统计线损和理论线损的计算模型。
Lastly, we put forward the computation model of the theoretics and statistics power Losses of line.
同时，本研究根据库容计算的模型和误差传播理论，提出了一种河道型水库库容计算成果的精度评价方法。
At the same time, according to the reservoir storage calculative model and error spread theory, this study has explored a kind of accurate valuation method of river -.
将超临界流体视为膨胀液体，根据溶液理论，建立了计算溶质在超临界流体中溶解度的膨胀液体模型。
An expanded liquid model (ELM) for solid solute solubility in supercritical fluids was proposed based on the assumption that the supercritical fluid was considered as an expanded liquid.
设计计算模块的主要功能是根据剃前滚刀设计理论完成复杂的剃前滚刀设计数据计算。
The main function of design and calculation module is to complete the complex calculation of design according to the design theory of preshaving hob.
根据随机过程理论，用计算机模拟生成具有空间相关性的风场。
Based on random process theory, wind fields with spatial correlativity were simulated in computer.
在总结激光频率变换的原理和非线性光学晶体的相位匹配理论的基础上，可以根据相位匹配理论进行晶体的相位匹配角的计算。
The principles of laser frequency transformation and the theory of phase matching in nonlinear optic crystals are also discussed. Based on this theory, Angle of phase match is calculated.
在总结激光频率变换的原理和非线性光学晶体的相位匹配理论的基础上，可以根据相位匹配理论进行晶体的相位匹配角的计算。
The principles of laser frequency transformation and the theory of phase matching in nonlinear optic crystals are also discussed. Based on this theory, Angle of phase match is calculated.
应用推荐