原始材料可能由RAM或硬盘组成,但是不管是哪种情况,文件系统数据结构都是组织由硬件制造商格式化了的扇区和字节。
The metal might consist of RAM or hard disks, but in either case, file system data structures organize the sectors and bytes formatted by the hardware manufacturer.
更确切的说,需查询材料清单库(比如存储于产品数据管理系统中)以了解传感器和挡风玻璃的特性。
More precisely, the Bill of Materials (as stored in a product data management system, for instance) is queried for the characteristics of the sensor and the windshield.
尽管更紧凑的芯片能够减少数据中心所需的金属材料,但是多年以来数据中心中的系统数量实际上一直在增长。
Rather than this decreasing the amount of iron needed in the datacenter, the amount of systems in the datacenter has actually increased through the years.
在实现这种模式之前,只能通过各种手工、自制电子和基于纸张的系统来完成统计数据和支持材料的收集,其效率比较低。
Prior to implementation of the pattern, statistics and supporting materials were collected less effectively by various manual, homegrown electronic and paper-based systems.
用于对系统中硬件、软件、机密、敏感、不机密,或关键性的数据,材料或过程提供可接受的水平的保护的所有安全特性。
All security features needed to provide an acceptable level of protection for hardware, software, and classified, sensitive, unclassified or critical data, material, or processes in the system.
负责原材料,成品仓库的管理,并维护CMS系统数据输入。
Manage the material and FG warehouse, input related data into CMS.
逐步推广计算机信息系统的使用与营销材料时,利用计算机数据的良好照顾,不泄露秘密销售。
Gradually promote the use of computer information systems dealing with marketing materials, take good care of computer data, not to divulge the secret sales.
该系统拓宽了用户获取工程材料数据及相关信息的渠道。
This system has widened the channel obtained the engineering material data and relevant information.
PC机内装有控制软件——高分子材料动态力学谱仪试验系统(GDPES)对控制器进行控制,从控制器得到数据并进行整理、保存。
The controlling software in the PC called GDP Experimental System (GDPES) can control the controller, get the datum from the controller to proceed and save the datum.
许多早期KM系统的设计,要求人们向数据库中输入材料或者创建个人档案,来帮助大家发现专门的知识和技术,从而实现组织中信息的获取。
Many early KM systems were designed to capture corporate information by requiring people to enter stuff into databases or to create personal profiles to help people find expertise.
建立了一套基于数据采集的MEMS薄膜材料参数在线测试系统。
A measurement system for in-situ extracting material parameters of MEMS thin film was proposed based on Data Acquisition.
通过对计算所得数据进行系统分析,得出质子在组织等效材料中能量沉积微观特性的一些规律与特点。
Some features about the micro-specialty of proton energy deposition in tissue equivalent material were given through the analysis of data from the calculation.
通过对计算所得数据进行系统分析,得出质子在组织等效材料中能量沉积微观特性的一些规律与特点。
Some features about the energy deposition micro-specialty of proton in tissue equivalent material were gained through the analysis to the data from calculation.
利用这三种预测方法对常用材料的腐蚀数据进行拟合预测,并对比分析三种方法拟合预测的结果,为建立腐蚀咨询专家系统提供依据。
Erosion data of general material are forecasted by these forecast technique and the results are analyzed contrastively. It offers support for erosion expsion system.
同时,MEMS材料数据库的设计与开发对于实现微机电系统产品的设计开发,实现产业化等具有重要的理论和应用价值。
The design and development of MEMS material database provide a lot of theoretical and applied value for the industrialization of MEMS products.
该系统由初始信息输入模块、材料推荐检索模块、数据库管理等模块组成。
The system is composed of initial information input module, material recommendation module and database administration module.
系统数据库的创建和组织,包括标准模架库、标准件库、原材料库等数据库的创建和组织。
Organize and establish the databases of system, including standard mould frame database, standard part database, materials database, etc.
本文采用理论和试验相结合的方法系统地开发了一套基于PC计算机的材料试验机测试、控制和数据处理系统。
In this paper, a system about material test machine for testing, controlling and data processing is exploited based on PC.
讨论了基于实例推理的难加工材料数据库系统的工作流程及建立过程。
The workflow and establishment of database system based on CBR is discussed.
该系统提供相关的零件、材料、工艺等方面的信息,在生产中有一定借鉴作用,也为后续研究提供了数据查询参考的依据。
The system provides information on materials, parts, processing and so on, which gives us a reference to manufacture and further research work.
分析了该摩阻材料智能设计系统的数据特点,建立了适合该系统的数据库。
In addition, the author analyzed the data characters of the intellectual design system and built the rudiment of suitable the data-base for the system.
首先,在分析耐火材料配料系统中数据采集器的功能需求的基础上,提出其电气特性与功能特性。
First, based on analyzing the data acquisition's functional requirement, the electrical and functional characteristic is proposed.
工作描述:1。负责公司产品及原材料成本核算,进销存系统数据的跟进和维护,销售统计和成本分析。
Job description: 1. Responsible for the company's products and raw material cost accounting, Invoicing system of follow-up and maintenance of data, sales statistics and cost analysis.
该软件已与笔者前期开发的计算机辅助切削力测试系统实现对接,并已应用于铸态铝合金材料ZL106与DFL-1的铣削力对比试验,实现了实时测试数据处理和直接输出试验报告。
It has been applied in milling force contrast test of molten aluminum alloy material ZL106 and DFL—1. It realizes both testing on-the-spot and printing the testing report of milling force.
概述了制订材料定额的重要性 ,说明了工艺数字化系统中材料消耗定额管理子系统的工作原理和数据流程 ,论述了系统的功能和特点 。
This paper summarizes the importance of the quota of material consumption system and explains the principle and data stream of it in process digitalization system(PDS).
系统流程的执行维护,例如收集数据并通过数据来支持材料需求计划、质量、人工报告等的车间生产报告体系。
Maintain execution of system processes such as shop floor production reporting portal that collects and passes all data to supporting MRP, quality, and labor reporting systems.
系统流程的执行维护,例如收集数据并通过数据来支持材料需求计划、质量、人工报告等的车间生产报告体系。
Maintain execution of system processes such as shop floor production reporting portal that collects and passes all data to supporting MRP, quality, and labor reporting systems.
应用推荐