注射成型是高分子材料成型加工的重要方法。
Injection molding is an important method of polymer process.
材料成型专业;
树脂膜熔渗工艺(RFI)是一种新型的复合材料成型工艺。
Resin film infusion (RFI) is a new technique for the manufacture of composite structures.
数控布带缠绕机是复合材料成型工艺中使用的关键设备之一。
We developed an NC(numerical control) tape winding machine for composite forming of aerospace components.
是一家专业从事EVA、海棉、高发泡等材料成型的加工企业。
Is a professional engaged in EVA, sponge, high-foam materials such as molding processing enterprises.
结果表明:数值模拟技术为复合材料成型工艺优化提供了可行方法。
The results show that simulation technology gives a credible method for composite processing optimization.
只要材料成型及控制工艺得当,用该成分的高锰钢生产衬板是可行的。
It is feasible that use this high Mn steel to produce lining plate so long as the forming and controling processes of materials are suitable.
树脂传递模塑法(rtm)是一种低成本、效益好的复合材料成型工艺。
Resin Transfer Moulding (RTM) is an established process for manufacturing polymer matrix composites with low cost and high benefit.
利用固化反应动力学模型对复合材料成型工艺的固化工艺进行了模拟计算。
The simulating calculation of composite curing process was carried out by means of cure kinetic model.
介绍了HAAKE转矩流变仪的系统组成及其在高分子材料成型加工中的应用。
The composition of HAAKE torque rheometer and its application to polymer moulding were introduced.
通常我们都知道,复合材料成型过程为拌胶-浸胶-预成型-固化-牵引等过程。
Usually we all know, composite molding process is mixed with glue - dipping -preform - cure - the process of traction and so on.
球头T型节育器是一种新型医疗器械,专用模具是一种新型非金属材料成型工具。
The utility model relates to a T-shaped contraceptive device with a ball head and the placing mould.
研究了乳化石蜡在耐火材料成型脱模应用中的配方、工艺,并对影响因素进行了讨论。
The formula and technology of emulsion paraffin in pulling off mould of refractory material forming are studied and the influencing factors are also discussed.
陶瓷零件快速成型技术是快速原型制造技术在陶瓷材料成型领域的重要应用方向之一。
Rapid prototyping manufacturing technics for ceramic parts is an important applied aspect of rapid prototyping manufacturing in ceramic molding field.
在传统泡沫夹层结构复合材料成型工艺基础上,探索了一种新型的夹层结构成型工艺。
Based on conventional manufacture methods a new manufacturing process of foam core sandwich structure composites is studied.
本文对热塑性复合材料用预浸料的结构及其在复合材料成型加工中的浸渍性能进行分析。
In this paper the structures and matrix impregnating behaviours during composites forming of intermediate materials by fiber mixing for thermoplastic composites were investigated.
因此,研究开发钢基冲压模具的快速制作技术方法是材料成型与加工领域的一个重要课题。
Therefore, the research of the fast manufacture technology method that develops the steel - based ramming mold is an important topic in the Material Forming and Process Engineering field.
分析了电流线圈骨架零件的结构特点及材料成型特点,介绍了该零件的注射模具设计方法。
After analysing the features of the structure of current coil skeleton parts and material formation, the paper introduces the injection die design method of this part.
是一种低成本、高效率的复合材料成型工艺,尤其适合制造复杂形状的大型复合材料构件。
The resin film infusion (RFI) has been identified as a cost-effective fabrication technique for manufacturing large geometrically complex structural components.
混编法直接制成织物状,在复合材料成型时,只需对现成的织物进行加工,工艺大大简化。
The flax yarns and PP multifilament were produced into fabrics by co-weave technique which could be directly handled during composites molding.
分析了材料成型与控制工程专业实践教学的现状,提出了构建新的专业实践教学体系的设想。
Preliminary probe into practical teaching system about material shaping and controlling engineering specialty is discussed through combining with current situation about universities in our country.
该材料应用的主要技术问题如增强体分散均匀性、材料成型、机械加工和热处理等已基本解决。
With the development of main application technologies such as balanced reinforcement, molding, machining and heat treatment, three major processes become maturity.
卧式离心铸造作为一种效率高、成本低的特种铸造方法,在材料成型方法中占有举足轻重的地位。
As a highly efficient and low-cost special casting method, horizontal centrifugal casting occupies a decisive position in material molding methods.
摘要:模具是工业产品生产使用的重要工艺装备,它以其自身的特殊形状通过一定的方式使原材料成型。
Abstract: Mold, which is used to mould raw material due to its special shape, is a piece of important equipment in the process of producing industrial products.
同时采用光学显微镜和SEM分别对织造中玻纤断裂情况和树脂在复合材料成型过程中的渗透性进行了研究。
The optical microscope and SEM were employed to analyze the damage of glass fiber during weaving and resin permeability in the course of molding of composite materials.
主要介绍了废旧塑木复合材料成型加工的研究进展,并就挤出机选型、机头设计、工艺参数进行了研究与探讨。
The development of the manufacturing process of waste plastic-wood fiber composite are introduced. The choice of extruders, designing of dies and adjustment of technical parameters were discussed.
本文对陶瓷pc型光纤活动连接器的关键部件二氧化锆插针体的材料配方,材料成型,材料烧结工艺进行了详细的研究。
This paper reports the detailed investigations on the composition, shaping process and material sintering of zirconia ceramic ferrule for PC type of fiber optic connectors.
本文对陶瓷pc型光纤活动连接器的关键部件二氧化锆插针体的材料配方,材料成型,材料烧结工艺进行了详细的研究。
This paper reports the detailed investigations on the composition, shaping process and material sintering of zirconia ceramic ferrule for PC type of fiber optic connectors.
应用推荐