从材料的结构、成分、性能、加工工艺过程等一系列的研究都是实验的结果。
A set of research from structure, constituents, performance and machining process of materials are all the results of experiment.
对珩磨精密加工工艺进行了实验研究，分析了粗珩加工中网纹角、工作压力、珩磨速度与材料去除率的关系。
Honing experiments are executed and the relationships between reticulate cross-angle, honing pressure, honing rates and material removal rate are analyzed in rough honing.
对单晶硅脆性材料的超精密磨削加工作了大量的实验研究。
In this paper, the experimental investigation is made on the grinding of single brittle materials.
公司聘有高级工程师数名，具有强大的加工生产能力和完善的密封材料和组合件检测、实验设备。
A number of senior engineer company name, strong production ability and improve the processing of sealing materials and composite testing, test equipment.
实验结果表明，气中加工的直线度好、放电间隙窄、加工速度（材料去除率）高。
Experiment results showed that WEDM in gas offers advantages such as better straightness, shoter gap length and higher meterial removed rate.
介绍了用于研究材料去除量与加工距离和形状关系的实验。
An experiment on material removal amount with the cutting distance and shape of passage is described.
对难加工材料的切割实验表明：复合工艺能较大幅度地提高加工效率，改善表面质量，降低断丝概率。
The cutting experiments for difficult to machine materials have shown that the cutting rate can be increased much more, the surface quality improved and the probability of wire breaking reduced.
本实验采用DRM研究范式，考察经验、材料性质和加工水平三个方面对虚假记忆的影响。
In this research we used the DRM paradigm to see if there is any effect of experience, material property and processing level on false memory.
实验结果表明，在所研究的压力区间里，两种材料表现出明显的加工硬化效应。
These experimental results indicate that these two materials exhibit significantly the deformation-hardening effect in the stress range studied.
实验还表明研磨加工后，工件表面都产生塑性变形，即使是像陶瓷、硬质合金等硬脆性材料，其表面也存在一定的塑性变形。
And experiment indicate that, machined parts will occur plastic deformation after lapping, even surface of brittle materials such as ceramics and carbide will deform to a certain degree.
实验同时分析了加工参数如加工电压、电解液种类和浓度、加工材料等对冷却孔成形的影响。
The effects of such machining parameters as voltage, type and concentration of electrochemical fluid, materials etc on the cooling hole formation were also analyzed.
根据钛合金材料的加工工艺性能，采用数控加工中心加工出拉伸实验所用试件。
According to the processing performance titanium alloy materials, using a CNC machining center processing the tensile test specimen.
利用自制的实验设备研究电镀金刚石线锯的超声纵振动切割加工脆性材料。
The ultrasonic vibration cutting processing of electroplated diamond wire saw for hard and brittle materials was researched.
实验结果显示：人眼对图画、中文词和英文词三种材料识别加工的眼动模式不同。
The results were that their eye movement models of recognizing and processing of these materials were different.
对氮化硅陶瓷磨削表面进行实验观察，从理论上分析了陶瓷材料的加工机理，提出了陶瓷的半延展性磨削模型。
This article analyses the material - removal mechanisms in grinding ceramics, and advertences the grinding model of ceramics semi - ductile regime grinding.
本研究采用正字法相似的汉字作为实验材料考察了RSVP任务中的RB效应的加工水平。
The present study examined the processing levels of repetition blindness (RB effect) in Chinese character processing in RSVP tasks.
采用加工分离程序和多重分离程序，以瑞文高级推理测验为实验材料，对内隐推理进行了实验研究。
This paper, using the process dissociation procedure and the multi process dissociation procedure and the Raven Advanced Progressive Matrices, experimentally studies implicit reasoning.
通过实验性分离，考察了刺激材料的局部知觉特征的改变如何影响再认的加工过程。
With the assistance of the paradigm of experimental dissociation, the experiment investigated the effect of modification of local perceptual traits on the dual process of recognition.
考虑了材料的加工硬化，经计算与实验比较表明了两者吻合良好。
Workhardening is also considered. The results of calculation are approximately in agreement with those of experiment.
在大量实验数据的基础上，采用最小二乘法建立了实用的多种材料电加工实验数学模型。
On the basis of a lot of experimental datas, experimental mathematical models of electric spark forming of several sorts of materials are built up with multiple linear regression analysis.
实验结果表明：此方法也适用于不同结构、不同材料的其他分体类零件裂解加工时裂解力的确定。
The experimental study was performed and results show that the proposed method can be used to determine the splitting for the other splitting parts with different shapes and materials.
熔融共混法加工过程中的混合温度、转速、时间对材料的成型和性质有着显著的影响，为得到最好的实验工艺。
The mechanical properties of materials were characterized and Effect of different synthesis conditions to mechanical property such as temperature, rotation and time were investigated in detail.
方法：采用低值、耐用材料加工制作，进行动物实验，评价该实验装置的实用性。
Methods the newly-developed device was made of some cheap materials with endurance. The practicalities of the device were determined with animal experiments.
作者在玻璃上进行微磨料水射流微细槽加工的实验基础上，对微磨料水射流加工的表面形貌、材料冲蚀去除机理及加工工艺性能进行了研究。
This paper presents a study of using micro-abrasive water jet for the machining of micro-channels on brittle glasses. The erosion mechanism, surface pattern and process performance are studied.
通过切削、磨削、抛光等实验证实该材料具有良好的加工性能。
The good machinability of the steels were proved by cutting, grinding and polishing experiments.
结合理论模拟，开展了飞秒激光微细加工不锈钢、镍等金属材料的工艺优化与微型零件制备及应用的实验研究。
Combined with the theoretical simulation, the parameter optimization of fs laser micromachining stainless steel and nickel was conducted for fabrication and application of metallic microcomponents.
研究了大气状态下应用扫描隧道显微镜（STM）对金薄膜和单晶硅材料进行了纳米级电场加工实验。
The nano dots fabrication tests of Au film and single-crystal silicon were performed in air using scanning tunneling microscope(STM).
带电的尘埃粒子广泛存在于宇宙空间、实验室的等离子体装置中和材料的等离子体加工等环境中。
Charged dust particles exist extensively in plasmas produced in space, laboratory as well as for plasma processing.
实验表明，施加超声振动不仅可以提高铣削加工的材料去除率，还可以较大的分层厚度和伺服进给速度进行加工。
Experimental results show that higher efficiency can be accomplished and bigger layer thickness and bigger servo feed rate can be chosen in UED-Milling in gas with the aid of ultrasonic vibration.
本文通过金属套管和改性聚醚醚酮复合材料棒芯的胶接实验，证明了在缸体的加工中使用胶接工艺是不合适的。
After the experiment of gluing stainless steel and modified PEEK composites, we knew the cylinder couldn't be manufactured by gluing.
应用推荐