分析了复合材料制备工艺对其结构及性能的影响。
The influence of the technological process on the structures and properties of composites is also discussed.
该材料制备工艺简单，便于实现工业化生产，具有广阔的市场应用前景。
The preparation method has the advantages of simple process and applicability to industrial production; and has wide market application prospect.
本文分别介绍了这些不同的陶瓷复合材料制备工艺，并对其不同的特点进行了讨论。
Every process above to prepare ceramic composites is introduced in this paper, and their different characteristics are discussed here.
主要介绍了自生铝基复合材料制备工艺的最新进展，讨论了自生铝基复合材料的性能及生成机理。
In this paper, the new technique to fabricate aluminium matrix composites by in-situ reaction method is reported. The properties and reacted mechanism are also discussed.
正负极材料、电解液及其添加剂、电池的结构以及制备工艺条件都对锂离子电池的安全性有重要的影响。
The anode and cathode materials, electrolyte and its additives, structure of battery and manufacture process had important effect on the safety of Li-ion battery.
在复合材料中由于制备工艺或后期损伤导致的弱结合界面，界面破坏为主要的复合材料破坏机制。
Interface breakage will be the main fracture mechanism if the interface bonding is weak because of the damage during the composites preparation.
铸造烧结法是一种制备铁基表面复合材料的新工艺方法。
Casting sintering is a new technique by which iron-based surface composites are produced.
该方法工艺简单，不受铸件形状和尺寸的限制，可用于表面增强金属材料的规模化制备。
Owing to the simplicity in process and the applicability for various shape-and size-casts, the technique allows the mass fabrication of metal -based surface composites.
煤矸石保温材料的烧结过程是其制备工艺的关键。
The sintering process is the heart of the preparing process of coal ganguethermal insulation material.
结果表明，采用真空热压后热轧工艺制备的碳纳米管铜基复合材料的致密度较高且能有效地防止被氧化。
SEM and XRD results show that the composite that is hot rolled after vacuum forming, has relatively high density and can avoid being oxidized effectively.
本文在综述了大量参考文献的基础上，制定了一套生产一种新型高性能复合蓄热材料的制备工艺，并进行了一系列实验研究。
In this paper, the process of preparing a kind of high quality composite heat storage material was established, following a series of experimental studies.
研究了不同增强颗粒、制备工艺的不同环节对铜基复合材料导电性能的影响。
The influences of different particles and different link of fabricating technology on electrical conductivity of copper - matrix composites were studied.
就这种水下灌浆材料的制备工艺与基本性能进行了研究。
The production process and basic property of this underwater grouting material were studied.
探讨了羟基磷灰石生物活性陶瓷的制备工艺对材料结构稳定性及力学性能的影响。
The influence of preparation techniques of hydroxyapatite bioactive ceramics on their structural stability and mechanical property were studied.
根据蒸压材料工艺学原理，使用石材厂的石粉泥浆为原料制备蒸压灰砂砖。
Based on the principle of autoclaved process, autoclaved sand-lime brick have been made using stone powder slurries from stone processing factories.
本试验对可食性淀粉膜的制备材料选择、工艺条件及膜的应用进行了研究。
This paper is mainly concerned about the materials, processing conditions and the application of the edible starch film.
研究了以玉米秸秆和淀粉为主要成分的新型缓冲包装材料的制备工艺。
The preparation technics of the new type cushion packaging material that took the corn straw and amylum as the primary composition was developed.
本文主要介绍硒化铅光导型多元红外探测器的电极材料选择和电极的制备工艺。
In this paper, the selection of electrode materials for PbSe photoconductive infrared detectors is mainly described, as well as its electrode fabrication processing.
选择金属镍作为定位机构材料，用LIGA工艺成功制备出定位机构的原理样机和镍标准样条。
The metal nickel was chosen as the material of latch mechanism, and the principle sample of latch mechanism and nickel standard sample were fabricated by LIGA technology.
研究了从废感光材料中制备硝酸银的工艺。
A new method of silver nitrate preparation from waste photosensitive materials has studied.
本文详细介绍了这种新型空调过滤材料(器)的过滤和灭菌机理、制备工艺和方法、性能及应用情况。
Filtration and sterilization mechanism, manufacture technics and method, performance and application status of this new air filtration material (filter) are introduced in detail in this paper.
讨论了该类材料的电化学性能、制备工艺及发展前景。
Additionally, the development prospect of the nanometer alloy anode materials is discussed.
论述了以水泥为基材制作高强复合胶凝材料的制备工艺、增强增韧机理及其存在的问题。
This paper focuses on production process, mechanisms for strength and toughness increasing as well as their existing problems for high-strength compounded gel materials based on cement products.
以环氧树脂为基体，以玻璃布和碳布为增强材料，采用模压成型工艺制备了某型无人机机翼环肋复合材料结构件。
The aerofoil rib parts for pilotless aircraft was manufactured by using mold pressing process with epoxy resin as matrix materials and glass cloth as enhancement materials.
为了更好地提高结构材料的阻尼减振能力，要在高阻尼结构材料的基础理论和制备工艺上实现新的突破。
In order to improve the capability of vibration damping of structure materials, innovation must be carried out from the aspect of basic theory and preparation techniques.
粉体表面改性是材料制备过程工程的重要手段，也是新材料、新工艺和新产品开发的重要内容。
Surface modification of powder is a important artifice, also is the magnitude content of new materials, new crafts and new product exploder.
系统地论述了功能梯度材料的概念、设计方法、制备工艺、性能评价及其应用领域。
The concept, design methods, fabricating techniques, property evaluation and applications of functionally gradient materials (FGM) are described systematically in the present paper.
本文介绍应用溶凝胶工艺制备离子传感器的敏感材料NASICON，并与传统的陶瓷工艺作了比较。
The NASICON sensitive materials for ionics sensors were prepared by sol-gel process and the process was compared with the conventional ceramic process.
采用料浆喷雾干燥工艺制备团聚型红外辐射粉体材料，经高温焙烧产生尖晶石结构，再用等离子喷涂工艺制备红外辐射涂层。
The title IR radiation powder is prepared by spray dry technology, which is calcined at high temperature to form spinel structure, and then sprayed with plasma forming IR radiation coatings film.
采用料浆喷雾干燥工艺制备团聚型红外辐射粉体材料，经高温焙烧产生尖晶石结构，再用等离子喷涂工艺制备红外辐射涂层。
The title IR radiation powder is prepared by spray dry technology, which is calcined at high temperature to form spinel structure, and then sprayed with plasma forming IR radiation coatings film.
应用推荐