包括机械性能分析在内的最佳状态调整使使用更回方便。
Including mechanical performance analysis, the best to use more convenient adjustment back.
要。包括机械性能分析在内的最佳状态调整使使用更回方便。
Want to. Including mechanical performance analysis, the best to use more convenient adjustment back.
分析了用有限元法模拟线材二辊、三辊和四辊轧机轧制的特点,对线材断面的几何形状、微观组织和机械性能进行了介绍。
By simulating the features of two -, three -, four-high mill with finite element method, the geometric shape, micro-structure and mechanical property of wire section are analyzed.
分析了疲劳试验系统中存在的普遍问题,即试验载荷的峰值和均值随着试验时间和试件的机械性能变化而发生漂移。
The general problem in the fatigue test system that the amplitude and mean of load signal will be changed with test time and change of mechanical characters of specimens is analyzed.
拉伸断裂界面的的SEM分析也表明二种纤维与基体的粘接状态不好,但复合材料同样具有良好的力学机械性能。
SEM analysis of tensile rupture interface also indicates that two fibers with PMMA matrix bind not well, but their composites have good mechanical property.
在这部分我们着重分析了竹纤维的机械性能和吸湿性能。
We emphasize on the mechanics property and moisture absorption of the bamboo fiber.
用回归分析法对NBR制备吸水膨胀橡胶的吸水膨胀性和物理机械性能进行了研究。
The water Absorption and swelling and physical properties of NBR water swellable rubber was researched by the method of regression analysis.
本文分析了国外一些国家轻轨车辆车门的型式、结构、材料和主要的物理、机械性能,为我国轻轨车辆车门的选型提供了依据。
Analyzes the types, structures, selected materials and their performances of car door for LRV at abroad, thus provides the scientific basis of selecting the car door types of LRV at home.
从基体组织和沉淀相质点等方面分析了时效强化铝合金机械性能的变化规律。
From base structures and precipitated phase particles and other aspects, this paper analyses the changing laws of age-hardening aluminium alloys 'mechanical properties.
文章利用实验测试的方法对织物的结构参数和机械性能进行研究,分析织物结构参数和机械性能与悬垂性之间的关系。
This article, by use of experimental testing, studied and analyzed the relationship of the fabric structure parameters and mechanical properties against the fabric drape.
并采用x射线衍射分析、扫描电镜及能谱分析研究了该样品的机械性能与相组成和微观结构的关系。
The phase contents, microstructure of the samples, and their relationship with mechanical properties were investigated by X ray diffraction, SEM, and EDS.
对铝包钢丝生产中常见的偏心,露钢、断丝,物理机械性能低等缺陷进行了分析,并提出预防与解决办法。
The eccentricity, bleeding, wire breaking, low mechanic property in the production of aluminium - clad steel wire are analyzed, the prevention and the resolution method put forword.
对材料的生物相客性、可生物降解性及物理机械性能进行了分析和比较。
The biocompatibility, biodegradability, chemical and physical properties of the polymers were discussed.
对低碳钢管线用的氩弧焊丝的化学成分、机械性能、可焊性能、耐腐蚀性能进行对比分析,为合理选用焊丝提供了依据。
The chemical composition, mechanic property, weldability and corrosion resistance of argon arc welding wire for low carbon steel pipe line are contrasted and analyzed.
论述基于稳定性的八足行走问题,分析生物蟹的典型行走方式和机械性能。
The issues of eight-legged walking robots based on stability are proposed, and the typical walking manners and the mechanical performances of biological crabs are analyzed.
分析了这种陶瓷刀具材料的微观结构对其物理机械性能的影响规律。
The resistance of this shearing type damper can be conveniently adjusted with very small electric power consumption.
分析了织物中线圈的形态,推导出了线圈残余曲率与纱线细度、纱线机械性能及成圈机件尺寸之间的关系式。
Loop shape in fabric are analysed in this paper and the equation about law between remnant curvature and yarn linear density, yarn mechanical properties and knitting elements dimensions is set up.
分析认为纺丝液的浓度、凝固浴组成与浓度、拉伸对丝纤维的物理与机械性能均有影响。
Fiber formation, appearance and properties at least depended on spin dope concentration, coagulation bath composition and concentration, and post-spinning draw.
所分析内容为进一步研究材料内部微观组织演变规律,准确预测楔横轧产品综合机械性能具有理论指导意义。
They have theoretical guide and significance further to investigate the micro-structural evolution law and predict accurately on comprehensive mechanical property of CWR product.
尤其是机床在机械性能方面的问题,必须认真进行性能失效分析。
Particularly it is important to the Failure analysis of Mechanical maintenance.
研究了渗碳后深冷处理对20钢机械性能的影响,分析讨论了深冷处理的作用机理。
The effect of deep cooling treatment after carburizing on properties of 20 steel is studied and the effect mechanism of the deep cooling treatment is analyzed.
通过对生产工艺、化学成分和机械性能的统计分析,对邯钢目前HRB335钢筋的质量特性和过程能力进行了分析,提出了应对措施。
The quality features and process performance of HRB335 reinforced bar are analyzed based on its production technology, chemical components and mechanical property, some measures proposed.
复合材料的机械性能与加工制造等过程密切相关,其材料性能的离散度较大,因此考虑不确定性因素的结构可靠性分析非常必要。
The mechanical properties of composite materials are correlated with the manufacturing process, and their diversity is generally larger than that of metals, so the reliability analysis is important.
由于模具表面层与基体材料的机械性能有明显的差异,忽略表面层进行的模具强度分析将产生不可忽视的误差。
Because of the obvious difference of the mechanical properties between the surface layer and its base, the strength analysis with neglecting surface layer will result in error not to be ignored.
通过对不同基体组织轧制白口铁的金相组织、磨损表面和机械性能的分析,研究了具有不同基体组织轧制白口铁的磨损机理。
The abrasive mechanism of rolled white cast iron with various matrixes are studied by investigating the microstructure, abrasive surface and mechanical properties of specimens.
研究了热熔黏合纤维的热性能,改进了非织造布服装领衬(领底呢)的加工过程,测试和分析了领衬物理机械性能和染色性能。
To start with, studied the thermal quality of the thermofusible fiber, then improved the process of clothing collar lining with non-woven fabric.
利用李雅谱诺夫直接方法分析了系统的稳定性,使系统应用的微喷射器表现了很好的机械性能。
Then we prove stability of this system in case of the normal operations by Liapunov's direct method, and apply the system to micro-injector actually for showing the effectiveness of the mechanism.
通过测试分析莨纱绸的机械性能、舒适性、抗紫外性的相关指标,并与传统丝绸进行比较,研究莨纱绸的结构性能。
The structure and property of Gambiered Guangdong silk was studied by testing its mechanical property, comfortableness, and UV resistance, and compared with the corresponding traditional silk fabric.
显微组织分析证明:止裂处出现了强韧性极高的超细化组织,改善了裂尖处的机械性能。
The analysis on microstructure showed that the super fine structure appeared at crack arresting area, the mechanical properties were improved.
本文主要按照塑料机械性能试验方法总的要求对改性尼龙66各阶段的结果做机械性能的分析、检测;
We also use plastic combustion and plastic subzero pleating method to analysis the properties of modified nylon66 resin.
应用推荐