本文作者采用数学模拟法求出这些参数值。
In this paper, the author attempted to obtain these characteristic parameters by using mathematical models.
本文作者采用准非线性方法建立了三轴式燃气轮机数学模型。
With the help of a quasi nonlinear method set up was the mathematical model of a three shaft gas turbine.
本文作者采用强夯法成(砂卵石)桩,进行了饱水软弱土地基改良尝试。
In this paper an attempt has been made of improving the saturated soft soil ground by means of dynamically compacted sand-cobble columns.
本文作者采用蒙特卡洛法对T型交叉路口支线车辆驶入干线时的排队现象进行随机模拟。
This article applies Monet Carlo theory in simulating randomly the queuing appearance when automobiles are waiting to enter main line form feeder highway at t style cross.
本文作者采用等效渗透系数方法模拟边缘效应,得到了其影响下的树脂流动前峰曲线和压力场。
In this paper, simulations are carried out with the approach of equivalent permeability, and the resin flow front curve and pressure fields with flow channels are obtained.
本文作者采用GC法,对渔轮的油漆进行分析,协助判断渔轮碰撞事故过程,为海事处理提供必要的物证。
This paper reported GC analyses of paints coated on the fishing vessels. It can provide some evidences for the collision between fishing vessels.
本文作者采用冷等离子体技术对PET缝编碳纤维织物进行表面处理,并采用AF M对处理前后的碳纤维表面形貌进行了分析。
In this paper, cold plasma technology is used to treat the surface of carbon fibers braided by PET and the surface microstructure of the carbon fiber is analyzed by AFM.
本文作者采用稀释通道、热重分析仪,测量了S195柴油机微粒排放的质量浓度,对微粒中的碳和碳氢化合物两种组分进行了分析。
The authors measured the mass concentration and chemical components of the particulates exhausted from a S195 diesel engine by using dilution tunnel and thermogravimetric analyzer.
本文分为四个部分,全文共计31090字,作者采用比较的方法、历史分析的方法等对公司董事越权代表公司问题进行了研究。
This article, which is totally 31090 words, is divided into four parts. The author adopted method of comparison, method of historical analysis, etc. to his research.
本文的研究重点即是作者是采用了完美的写作技巧才是这一主题得到充分展现,从而小说的写作技巧进行了全面的分析。
This thesis attempts to analyze the excellent writing techniques used by the author in the novel through which the theme is fully revealed.
本文根据作者多年建井测量的实践经验,采用自由摆动观测方法,简单快捷、高精度地完成立井联系测量中的坐标传递工作。
In this paper, the author completed the connection survey of a vertical shaft simply and precisely by the observation method of free oscillation.
不同的作者往往采用不同的平均方法,本文对于这些方祛作出了详细的理论与数值分析比较。
Various averaging methods have been employed by different authors. A detailed comparison of these methods is presented in this paper through both theoretical and numerical analysis.
本文所述的是作者采用的一种热设计方法来设计几种企业型服务器。
This article presents the thermal design methodology used by the authors to design several enterprise servers.
本文对交叉证认技术选取平滑因子的若干问题进行了探讨,许采用模拟数据的方式验证了作者的观点。
In this paper, some problems about smoothing factor selected by cross-validation technique are discussed and tested by using the simulation data.
本文主要介绍作者在实践的基础上提出的采用非线性迭加的方法改善调压调速电梯的起动性能。
This paper presents a method to use Nonlinear Superposition Design, which can improve start characteristic of lift car.
本文报导了作者采用染料与碘盐结合作定向剂的方法可取得显著的成果。
This paper reports that these same authors have got significant advancement on this subject by using dyes and iodide in comb...
本文着重阐述了自己在实际工作当中,采用的正确的安装方式和找正方法,让操作者能更好地提高产品的质量和生产效率。
In this article, different workpiece-fixing and adjusting methods used in my practical work are mainly put forward, in order to help operators advance the products' quality and production efficiency.
本文通过对一台带有单浆的12缸柴油机的实例计算,说明采用作者所提方法的精度是可用的。
The calculation of a single screw 12-cylinder diesel shows that the accuracy of the proposed method is acceptable.
本文采用静力法进行了详细的求解,并且用作者提出的能量法进行了验证,结果相同。
This paper presents a detailed derivation of the buckling moments under three types of end moments, using both the static equilibrium method and the energy method proposed by the authors.
作者着重的对设计中采用的槽模圈梁在施工中的复杂性提出了简便易行的施工工艺,是一项较好的新技术,本文由浅入深的论述了一些实际应用的效果。
Author brings forward a constructing technics, it is simple and convenient and easy to be performed. It is a new technology. This paper discusses effect that it is applied in practical engineering.
作者着重的对设计中采用的槽模圈梁在施工中的复杂性提出了简便易行的施工工艺,是一项较好的新技术,本文由浅入深的论述了一些实际应用的效果。
Author brings forward a constructing technics, it is simple and convenient and easy to be performed. It is a new technology. This paper discusses effect that it is applied in practical engineering.
应用推荐