并给出了最优化设计的判据。
本文介绍一种恒时延滤波器的最优化设计方法。
This paper introduces an optimal design method of constant-delay filter.
水平定向钻进轨迹最优化设计进行了深入研究。
This paper discussed the horizontal directional drilling trace optimization design in no-dig engineering.
本文讨论了GPS工程控制网的最优化设计问题;
In this paper, the problems on best optimum design of GPS Engineering control network are discussed.
建议采用实时控制系统,实现压射曲线的最优化设计。
A real time controlled system is proposed to realize the optimum design of shot curve.
本文应用数学规划法和最优化设计的原理对转向机构进行了优化设计。
The optimum design of steering mechanism is, in this paper, performed by means of mathematical programming method and optimum design principle.
给出了用计算机进行最优化设计的程序流程图及主要部分的设计程序。
Flow charts of program of optimum design by means of a computer and the main parts of program of the design are given.
本文是采用向量、矩阵和最优化设计等机构学的分析方法来解决这一课题的。
The problem can be solved with the analytic methods of mechanisms of vector, matrix and optimum design.
最优化设计以及萃取剂结构与其物理性质和结构与萃取性能的相关分析研究。
The system can offer users the optimal experimental parameters by the models established on the basis of the technilogical process of extraction using the optimum programming…
模拟式设计方法可解决经验式设计必须多次试验和不能进行最优化设计的问题。
The simulative design solves the problems that one must test many times and the optimal design can not be done in empirical design.
本文根据最优化设计原理,推导并建立了大锻件多件拼锻节材的最优化数学模型。
Based on the principle of optimum design, an optimization mathematical model of forging multi-pieces for saving material has been advanced.
所研制的TLT所使用的磁芯基本符合级间无耦合结构TLT最优化设计的要求。
Magnetic cores used in this TLT met the optimization requirement of the TLT structure without coupling between stages.
应用数学规划法和“最优化设计”的原理对边坡压实机的构件进行了结构优化设计。
Structural optimum design of component for new roadbed side slop compactor is performed by means of ma-thematic programming method and optimum design principle.
本文包括(1)伪互补滤波器的分析;(2)最优化设计方法;(3)计算结果举例。
This paper consists of (1) analysis of pseudo-Complementary filter, (2) optimization design method and (3) a design example.
本文举例对算法进行了验证,并表明此方法是适于化学工程系统最优化设计的有效工具。
The proposed algorithm is shown to be a promising alternative for solving system design problems.
本文介绍把受约束非线性规划方法应用于热力设备最优化设计中进行初次试验的一些结果。
In this paper, some results of a trial applying the constrained nonlinear programming method in optimal design of thermal equipments are presented.
讨论了当测量控制网网形设计中控制点选点范围为不规则多边形时的点位最优化设计问题。
This paper discusses the surveying control point position optimization design problem, while the selecting areas of the points are not rectangle, but any irregular polygons.
并以调节器参数最优化设计为例,论述了目标函数构造、初值确定、动态系统仿真分析的过程。
Taking optimization design of adjustor as an example, the process of constructing object function, defining initial value and simulating dynamic system was discussed.
探讨了阻燃剂配方的最优化设计,提出了合成磷酸酯阻燃剂和软质聚氨酯泡沫塑料阻燃方面的新设想。
The optimum design of flame retardants formula was discussed. Some new conceptions about synthesis of phosphate and flame retardation of soft polyurethane foams were suggested.
论述了钻机最优化设计研究中的某些问题,探讨了钻机优化设计中的目标函数、约束条件和求解方法。
In this article, the authors present the research on the object functions, subject conditions and resolve methods in the optimal methods of borer design.
指出此技术的关键在于选择合适的还原剂和冶炼参数的最优化设计,最后展望了此项技术的应用前景。
It points out that the suitable reductant and the optimization design of smelting parameter are the key technologies to this process. At last, the future of this technology ha...
本文把最优化设计方法和稳健设计思想有机地结合,提出一种基于随机模拟试验的稳健优化设计方法。
Combining optimal design method with robust design principle, a new approach for the robust optimal design is investigated make use of stochastic simulative experiment.
利用五次多项式曲线对挑线凸轮进行了设计;并根据刺绣机的特殊要求,提出了刺绣机最优化设计方法。
Based on the curve of quintic polynomial, the take-up CAM is designed, and the method of optimized design is presented in this paper.
论述了力矩器在设计过程中磁路与结构之间的关系,通过磁路工作点的选择来达到力矩器的最优化设计。
The relation between magnetic circuit and structure in the torque designing is discussed, and via choosing the best working point of the magnetic circuit, the optimal design is realized.
根据有限元理论及最优化理论,同时考虑结构受力特点,给出了塔架体系在可靠度约束下的最优化设计方法。
Based on finite element theory and optimization theory, considering mechanical properties of the structure, the reliability optimization design method of tower truss system is presented.
在电路设计过程中,对后级接口电路进行了最优化设计,采用VHDL描述的方式实现了低压数字延时电路模块的设计。
In this paper, the optimization method was used to design the interface circuit, and use VHDL description to design low voltage digital delay timer.
本文在一个经实验验证的简化数学模型的基础上,提出了借助于一台微型计算机实现电涡流传感器最优化设计的具体方法。
This paper introduces an optimum design method of E. C. T. on the basis of a simplified mathematical model verified by experiments.
本文在一个经实验验证的简化数学模型的基础上,提出了借助于一台微型计算机实现电涡流传感器最优化设计的具体方法。
This paper introduces an optimum design method of E. C. T. on the basis of a simplified mathematical model verified by experiments.
应用推荐