介绍该系统的构成及智能节点的设计。
Presents the composition of the control system and design of intelligent nodes.
介绍了LON智能节点的构成以及节点的类型。
The composition and category of LON intelligent nodes are introduced.
给出了CAN总线智能节点的硬件构成及温度巡检的软件实现方法。
The composition of hardware of intelligent node is given. Realization of software of temperature measuring is described.
该智能节点已应用在混合动力汽车总成控制器中，满足了总成控制需要。
The intelligence node has been applied in powertrain controller of hybrid electrical vehicle and meets the need of powertrain controller.
该智能节点已应用在混合动力柴油发电机组控制器中，满足了控制需要。
The intelligence node has been applied in diesel engine and generator controller of hybrid electrical vehicle and the need of powertrain controller has been met.
最后，基于制作完成的网桥及智能节点组建列车网络平台并进行通信调试。
On this basis, the train communication network experimental platform is established, we also conducted the corresponding communication debugging.
文中讨论了智能节点和上位机的设计，并论述了通道的标定方法和系统的网络通信。
The smart nodes and supervisor software are analyzed, furthermore, the calibration method of signal detection channel properties and network communication are discussed.
通过对CAN网络、可视对讲CAN智能节点的分析，研究CAN网络分布式可视对讲系统。
By researching the CAN network and CAN spots of visual -speaking systems, we have developed a kind of distributed visual-speaking system based on the CAN network.
通过对CAN网络、可视对讲CAN智能节点的研究，开发CAN网络分布式可视对讲系统。
By researching on CAN network and CAN spot of visual -speaking system, we have developed a kind of distributed visual-speaking system based on CAN network.
阐述了80c 196K C单片机的特点、智能节点的结构以及系统的硬件框图和软件设计。
The paper introduces the trait of 80c196kc, the structure of brainpower-node, hardware block diagram and software design of system.
分配了CAN总线智能节点及其功能，设计了适合于凿岩机器人实时性要求的CAN总线用户协议。
Assigns functions of intelligent nodes, and designs the CAN-bus user protocol for real time demand of rock drilling robot control system.
智能节点的设计以LPC 2119芯片为核心，具有硬件简单、封装小巧、软件模块化强的特点。
The developed intelligent node with hardware core of LPC2119 chip had characteristics of hardware in brief, smart pack, and software in blocking.
给出了此系统的原理及整体结构，重点阐述了CAN总线智能节点的软硬件设计、实现与注意事项。
The principle and the whole structure of the data acquisition system are given. The main concerns are software and hardware design, the realization and the rules of the intelligent node of CAN.
同时还利用微处理器AT89S51、CAN控制器SJA1000和CAN收发器开发了智能节点。
The intelligent node of using microchip AT89S51, CAN controller SJA1000 and the CAN transceiver are also developed.
介绍了利用可编程控制器(plc)、仪表、CAN总线模块作为前沿智能节点组成的污水处理系统。
The waste water treatment system combining PLC, instrument and CAN BUS as smart node is presented.
CAN总线上的智能节点是网络上报文的接收和发送站，一般由单片机和可编程的CAN通信控制器组成。
The smart node on CAN field-bus is the transmit or receive station of messages. It is mainly combined with micro-controller and programmable CAN controller.
论文首先简述了MVB总线在整个机车网络中的重要地位及开发智能节点在MVB网络调试过程中的必要性；
Firstly, the paper outlines the importantment of the MVB in the train network and the necessity of the design of MVB intelligent node in the testing of MVB network;
在了解CAN总线功能与特性的基础上，重点阐述了CAN总线智能节点在煤矿运输信、集、闭系统中的应用。
This paper presents the function and characteristics of CAN bus, and gives more description of CAN intelligent nodes application in coal transportation signal, integrated and blocked system.
介绍了基于CAN总线的可燃气体探测系统成，给出了CAN总线智能节点的硬件构成及浓度检测的软件实现方法。
A combustible gas detector based on CAN bus is introduced. The hardware structure of CAN bus intelligent node is given. The combustible gas concentration measurement by software method is described.
本文中论述了CAN总线的基本原理与技术规范；设计了以微控制器AT89S52为核心的CAN总线智能节点；
This dissertation elaborated the basic principle and the technology standard of CAN bus, and designed a CAN node with AT89S52 micro-controller.
利用微处理器87c5 92设计和研发了基于CAN总线技术的智能节点，并在十字路口红绿灯控制中得到了应用。
Using 87c592 microprocessor, the CAN technology based smart node is designed and developed. Moreover, the system composed of nodes has been used in controlling traffic light of intersection.
以基于CANBUS现场总线技术的FBCAN 2ct隔离型脉冲测量智能节点为例，介绍系统构成、数据包传输格式、软件设计。
This paper introduces the system structure, the transfers format of the data package and the software design of the FBCAN-2CT isolated pulses measurement node based on CANBUS.
系统由一台上位机和多个智能节点组成，智能节点采用单片机at89c51为主处理器，神经元芯片TMPN3120为从处理器。
The whole system is made up of a main computer and many intelligent nodes. Each intelligent node takes on microcontroller AT89C51 as host processor and Neuron chip TMPN3120 as slave processor.
本文对于利用FPGA芯片进行系统设计的研究人员具有一定的参考价值，也可以作为LONWORKS现场总线智能节点开发的参考资料。
The paper maybe value to those who ready to use FPGA chips in their designs or be reference for development of neuron node based on LONWORKS field-bus technology.
内置到模式的智能支持跨映像供给参数，这样自定义节点、部署管理器和IHS节点都连在一起并以正确的顺序启动。
Intelligence built into the patterns supports feeding parameters across images so that custom nodes, deployment managers, and IHS nodes are all wired together and started in the correct order.
和传统的对象存储类似，Ceph 存储节点不仅包括存储，还包括智能。
Similar to traditional object storage, Ceph storage nodes include not only storage but also intelligence.
objectify树中的节点对象被有意设计成没有什么智能。
The node objects in gnosis.xml.objectify trees are, by design, quite dumb.
提供基于数据节点拓扑结构和访问延迟的智能控制，以提供最佳的数据访问性能。
Intelligent NoSQL Database driver is topology and latency aware, providing optimal data access.
但是，在Ceph中，文件系统的智能分布在节点上，这简化了客户端接口，并为Ceph提供了大规模(甚至动态)扩展能力。
But with Ceph, the file system's intelligence is distributed across the nodes, which simplifies the client interface but also provides Ceph with the ability to massively scale (even dynamically).
然后将MCU芯片at89c51和SJA1000总线控制器结合，为实验平台设计了实时可靠的智能控制CAN节点。
Thirdly, combining MCU clip AT89C51 with bus controller SJA1000, an intelligent control CAN node for the experimental platform is designed.
应用推荐