低合金铸铁在海水中的腐蚀行为与普通铸铁相似。
Corrosion behavior of low alloy cast irons in seawater is similar to that of ordinary cast irons.
同时,由于采用普通铸铁作为模具主体材料,降低了成本。
Meanwhile, common cast iron was used as the main material of the die so that the manufacture cost was lowered.
普通铸铁在天然海水及流动海水中的腐蚀速度与碳钢接近。
Corrosion rate of ordinary cast irons is close to that of carbon steel in natural and flowing seawater.
工作试验结果表明,新材质制造的坩埚使用寿命是普通铸铁坩埚的2—3倍。
The industrial tests have shown that the service life of new alloy cast iron crucible is 2-3 times as long as ordinary grey cast iron crucible.
工业试验结果表明,新材质制造的坩蜗使用寿命是普通铸铁坩埚的2 ~3倍。
The industrial test results have shown that the service life of new low alloy cast iron crucible is 2-3 times as long as ordinary grey cast iron crucible.
用铌中间合金处理铁水,对所浇注的试样作了耐磨性试验研究表明,当含铌量为0.15 ~ 0.4%时,铌铸铁较普通铸铁耐磨性提高5倍左右。
The wear resistance of niobium alloyed cast iron was studied. Result shows that the wea resistance of cast iron containing 0.15-0.4%nb is about 5 times higher than gray iron.
传统的镀锌钢管和普通排水铸铁管由于易锈蚀、自重大、运输施工不便等原因已逐渐被取代。
The traditional galvanized steel tube and ordinary drainage iron pipe due to easy to rust, since the major, transportation construction inconvenience of reason has gradually be replaced.
依据铸铝坩埚的服役条件,制造工艺和成本要求,选择中硅耐热球铁取代普通灰口铸铁制造铸铝坩埚。
Medium silicon heat-resisting nodular cast iron has been chosen instead of common grey iron to make cast aluminium crucible according to the work condition. making process and cost of the crucible.
而增加含硅量后的低铬白口铸铁的腐蚀磨损耐磨性将比普通白口铸铁的高。
The corrosion wear resistance of low chromium white cast iron increases when the silicon content increases in it.
采用普通钢球作为对比,研究磨矿过程中以铸铁段为细磨介质的破碎效果。
Comminuting effect in grinding process by using cast iron segment as fine grinding media is studied with comparison to steel ball.
从低合金化、变质处理、热塑性变形、铸造和热处理等几个方面,综述了国内提高普通白口铸铁韧性研究的进展情况。
The ways of improving the toughness of white cast iron Were reviewed by means of low-alloying, modification, hot plast deformation, casting and heat treatment.
论述了普通铸钢、铸铁件用的覆膜砂、非铁合金铸件用的易溃散覆膜特种性能覆膜砂。
The coating sand for cast iron and cast steel and collapsible coating sand for nonferrous alloy casting are also described.
在没有铸铁焊条的情况下,采用普通低碳钢焊条制作铸铁焊条,用电弧冷焊技巧修复损坏的铸铁件。
If there aren't cast-iron electrode, the cast-iron electrode can be made by ordinary low carbon steel electrode, and repair the damaged stock with arc cold welding.
分析了高强度合成铸铁中石墨和基体组织的形成过程,并将其与普通灰铸铁的显微组织进行对比。
The formation process of graphite and matrix structure in high strength synthetic casting iron was analyzed and compared with the microstructure of common grey iron.
通过预先制备带有孔隙的硼铁合金预制块,用普通浇注的方法,获得以灰铸铁为基的铸造表面复合材料。
Using a prefabricated porous ferroboron lump, a surface composite layer was made on gray cast iron matrix, with a common casting method.
中磷白口铸铁的宏观硬度和显微硬度高于普通白口铸铁,但冲击韧性略有降低。
The hardness and its microhardness of medium phosphorus white cast iron are higher than those of the common white cast iron, but its impact toughness slightly decreases.
针对不锈钢,合金钢,黄铜,普通钢,铝合金,铸铁不同的材质有不同的油剂。有不同的包装以及各种油剂的标准重量。
For stainless steel, alloy steel, brass, ordinary steel, aluminum, iron different materials have different finishes. There are all kinds of different packaging and finish the standard weight.
在普通高铬铸铁的基础上,研制了一种用于制造螺旋分级机小叶片的高合金耐磨铸铁材料。
Based on the ordinary high chromium cast iron foundation, designed one kind of high alloy abrasion-resisting cast iron material which is used to make the lining iron of the screw grader.
为了克服铸铁、橡胶、木质和普通塑料板框的缺点,对新材质板框进行了研制。
In order to overcome the shortcomings of plate-and-frame which is made of cast iron or rubber, wood, common plastics, the authors have developed a new kind of material for making plate-and-frame.
铸件材质能满足普通灰铁、高级铸铁、球墨铸铁、有色合金技术要求。
The casting materials can meet the technical requirements of common gray iron top-grade cast iron, ductile cast iron and non-ferrous alloy, etc.
产品用途:适用于普通碳钢、铸铁等各种材质工件深孔镗的钻孔,镗孔,刮削滚轧加工。
Product use: machining deep hole gun is applicable to stainless steel, aluminum alloy, steel, cast iron and other materials of drilling, deep hole boring of workpiece.
而增加含硅量后的低铬白口铸铁的腐蚀磨损耐磨性将比普通白口铸铁的高。
The effect of Si content on the corrosion wear resistance of low chromium white cast iron in the slurry with Cu2+ ion was studied by three-body corrosion wear test.
铸铁弯板分为铸铁弯板、直角弯板、 T 型槽弯板、普通弯板、拼接弯板、花岗石弯板、大理石弯板、花岗岩弯板、直角靠铁、直角靠板、直角尺弯板。
Cast iron angle plate can be divided into cast iron angle plate , right-angle bending plate, T-slot plate, the common angle plate , splicing plate, right angle by iron, right angle on board and so on.
用普通电阻炉加石墨保护的方法成功地在铁素体基灰铸铁及珠光体基灰铸铁基体上制备了镍基自熔性合金粉末复合材料。
The thermal spraying process was used to obtain the composite coatings of nickelbased self fluxing alloy reinforced by buckytube on plain carbon steel substrate.
用普通电阻炉加石墨保护的方法成功地在铁素体基灰铸铁及珠光体基灰铸铁基体上制备了镍基自熔性合金粉末复合材料。
The thermal spraying process was used to obtain the composite coatings of nickelbased self fluxing alloy reinforced by buckytube on plain carbon steel substrate.
应用推荐