从矿用锚喷机分料盘的实际工作条件出发,利用扫描电子显微镜和电子探针观察分析分料盘的磨损机理。
According to the actually operation condition of the lining plate of concrete shotting machine, the wear mechanism of the lining plate has been analyzed with SEM.
利用反光显微镜、MPV - 1型显微光度计、JCXA- 733型电子探针、X射线粉晶分析等手段对产在河南祁雨沟爆破角砾岩型金矿中的针硫铋铅矿进行了研究。
Aikinite in the Qiyugou gold deposit, Henan Province has been studied by means of reflecting microscope, MPV-1 Type microphotometer, JCXA-733 Type electron microprobe and X-ray powder analysis.
应用化学分析、金相和电子探针显微分析技术对反应器中冷却水管的失效原因进行了分析。
Reasons of failure in cooling pipe of the reactor have been studied by the chemical composition analysis, optical microscopy examination and electron probe microanalysis.
本文将介绍扫描探针显微镜及其在微电子工艺和器件微分析中的应用。
This paper gives an overview of SPM technology and its applications in microanalysis of microelectronics process and devices.
利用光学金相显微镜、显微硬度计、电子探针及X射线衍射分析仪初步探索其中温回火转变过程。
Optical metallographic microscope, micro-hardness tester, electron microprobe and X-ray diffraction analysis were applied to explore the process of intermediate temperature tempering transformation.
利用原子力显微镜、二次离子质谱分析仪和探针,对多晶硅薄膜的高温退火特性进行了实验研究。
An experiment was conducted to study the high-temperature annealing characteristics of polysilicon films using atomic force microscope, secondary ion mass spectroscopy and probe.
扩散偶和合金样品采用光学显微镜、扫描电镜和电子探针显微分析技术进行分析。
Both the diffusion couple specimens and the alloys were examined by means of optical microscopy, scanning electron microscopy, and electron probe microanalysis.
利用光学显微镜、电子探针对铅精矿中银的赋存状态进行了分析。
The speciation of silver in the lead concentrates were analyzed by means of optical microscope and electron probe micro-analyser (EPMA).
针对法兰盘加工面上出现的黑纹缺陷,采用光学显微镜、扫描电镜和电子探针等测试方法对其进行了分析。
Analysis is made on the dark lines defects occurring over the working surface of flange by measurement with the optical microscope, Scanning electro microscope (SEM) and electronic probe.
用光学显微镜、透射电子显微镜以及电子探针等现代材料试验手段对50钢中存在的大块黑色团状异常组织进行了研究和分析。
The abnormal block and black round structure of 50 axletree steel was studied and analyzed using optical microscopy, transmission electron microscopy, electron probe and so on.
用电子探针、光学显微镜对电厂凝汽器泄漏铜管的成分、组织、微区元素分布进行分析。
The composition and microstructure of the failed copper alloy tube in a condenser were studied by means of optical microscope and EMPA.
根据显微构造和电子探针结果分析可知,研究区基底变质岩经历过至少三次变形变质作用。
According to microstructural and electron microprobe analyse, it has been determined that at least three metamorphic stages occurred in the basement metamorphic series in the region.
利用金相显微镜、X射线衍射仪及电子探针等对Q 345热轧钢板因冷弯产生的裂纹进行了系统检验分析。
The present paper systematically checks and examines as well as analyzes causes to the cold-bended crack in the hot rolled steel plate Q345 by microscope, X-ray and Electron Probe Micro-analyzer.
用金相显微镜和电子探针对新氢压缩机活塞杆断口进行了分析。
The fracture of piston rod of new hydrogen compression pump is studied by metallography and electron probe in this paper.
对节镍型奥氏体不锈钢冷轧断带进行金相显微观测和电子探针分析。
The microstructure and strip rolling breakage of low nickel austenite stainless steel were observed and analyzed by optical microscope, SEM and electronic probe.
采用金相、扫描电镜、显微硬度及电子探针显微分析等手段对结合界面区域的组织结构、显微硬度变化及元素扩散进行了研究。
The structure, microhardness change and element change in the zone of bonding interface were studied by means of metallograph, SEM, microhardness and EPMA, etc.
应用显微拉曼光谱和电子探针技术,对云南禄丰出土的元代铜镜腐蚀情形进行研究,确定了铜镜本体及其表面腐蚀产物的成分,并初步分析了元代青铜镜采用的防腐技术。
Here Raman microscopy and electro probe technique were used to identify the corrosion products and their locations on and within of ancient Yuan Dynasty bronze mirror from Lufeng of Yunnan province.
利用金相显微镜和电子探针分析了扩散退火前后碳钢的金相组织、夹杂物和磷偏析的变化情况。
The microstructures, inclusions and of steels before and after diffusion annealing was compared by means of microscope and electron probe micro-analyzer (EPMA).
用透射电子显微镜、扫描探针显微镜、紫外-可见分光光度计和热重分析仪表征了复合材料的物理性能,分析了其吸收蓝移及热稳定性提高的机理。
The physical properties are characterized by TEM, SPM, UV-Vis and TGA. The mechanism of absorption blue-shift effect and the improving of thermal stability of nanocomposite materials are analyzed.
利用包含ZAF基体修正的电子探针,介绍X射线显微分析的理论。
Introduction to the theory of X-ray microanalysis through the electron microprobe including ZAF matrix corrections.
纳米光纤探针作为近场光学显微镜和纳米光纤生物传感器中的关键元件,用于微小尺度物体的检测和分析。
Fiber-optical nanoprobes are the key elements for detecting and analyzing micro-scale objects in near-field optical microscopes and fiber-optical nano-biosensors.
用金相显微镜、显微硬度计、电子探针和透射电镜对硬化层进行分析。
The hardening layer was analyzed by metalloscope, microhardness, electronic probe and transmission electron microscopy.
在野外调查基础上,通过显微镜下观察及电子探针分析,对矿区主要金属硫化物进行了细致研究。
On the basis of field work, by means of observation of microscope and analysis of electron probe, this paper researches main sulfide minerals of the deposit at great length.
进一步根据角谱传递函数计算了不同样品的光子扫描隧道显微镜理论图像,分析了探针与样品的间距、探针孔径大小、照明光入射角等对光子扫描隧道显微镜成像的影响。
Based on ASTF the influence of such parameters as tip-sample distance, tip aperture diameter and the incident Angle of illuminating laser beam on PSTM image has been discussed.
采用中频真空感应熔炼炉、X射线衍射仪、金相显微镜、电子探针、显微硬度计等实验分析方法,研究了稀土金属铈与低熔点金属锡在钢中的相互作用。
The interaction between the cerium and tin in steel was studied by vacuum induction melting, Xray diffraction, optical microscopy, electronic probe microscopy analysis, and microhardness tester.
采用中频真空感应熔炼炉、X射线衍射仪、金相显微镜、电子探针、显微硬度计等实验分析方法,研究了稀土金属铈与低熔点金属锡在钢中的相互作用。
The interaction between the cerium and tin in steel was studied by vacuum induction melting, Xray diffraction, optical microscopy, electronic probe microscopy analysis, and microhardness tester.
应用推荐