通常，当我们想到健康时钟，我们就想到积极的事情：婴儿出生或实现目标。
Usually when we think of health clocks we think of positive events: babies being born or achievement of targets.
顾名思义，此调控器的目标的通过将处理器时钟速度设置为最大级别而实现最大的系统性能。
As the name implies, this governor's goal is to get the maximum performance out of a system by setting the processor clock speed to the maximum level and leaving it there.
时钟电路在数字电路中占有重要位置，对实现数字电路的功能起决定作用。
The clock, which is the decisive factor to carry out the function of digital circuit, plays an great important role in circuit digital circuit.
该效应可用于实现光网络中的特殊功能器件，如光时钟分布、多路波导耦合器等。
The effect can be used to realize special functional devices in optical networks, e. g., optical clock distribution and multi-waveguide coupler, etc.
提出了采用偏振全息术制做全息光学元件以实现光学时钟分布的方法。
In this paper the novel method of using holographic optical element (HOE) to realize optical clock distribution was presented.
本文讨论了一种低功耗时钟芯片的设计与实现。
This paper discusses the design and implementation of a low-power digital clock chip.
说明：一个用VCGDI +实现的小时钟，很实用。
由程序综合的控制电路以PW M控制和ZVS控制为目标，并由时钟同步，实现了对驱动波形的控制。
The latter takes PWM (Pulse-Width Modulation) control and ZVS control as its target, synchronizes with clock to realized its driven waveform. In addition, adaptive dead-time control is analyzed.
同时产生同步、消隐、数据时钟等信号以及实现遥控、屏幕显示的控制功能。
The interface circuit also can produce synchronous, vanished and ensconced, digital clock signal and realize remote control, displaying on screen.
通过FPGA实现在一定系统时钟和触发信号作用下各种工作模式的触发信号的产生。
Based on the system clock and trigger input signals, using FPGA to generate trigger output signals in given working modes.
在时钟电路中采用分相采样技术，实现了定时分析最高200m的等效采样速率。
Application of the technology of sampling in different phase in clock circuit realizes maximum 200m equivalent sampling rate of timing analyzer.
这些功能的实现是通过系统中电控部分的电源、时钟、存储、超声波脉冲信号发生、处理、温度采集、串行通信电路实现的。
These functions are realized by the circuits of power, clock, memory, ultrasonic pulse signal occurs and handle, temperature gathered and serial communication in system.
激光时间传递是通过激光脉冲在空间的传播来实现地面与卫星时钟或地球上远距离两地时钟的同步。
Time transfer by laser pulses is based on the propagation of light pulses between satellite and ground clocks or between remote clocks on THC Earth.
以GPS系统实时时钟为基础，通过对绝对时标加以处理，以无线方式实现了不同站点之间的实时数据采集。
Based on real time clock of GPS system, and by means of absolute time-marker, real time data acquisition between different sites was performed in the form of wireless.
首先讨论了逻辑时钟方法及逻辑时钟的修改算法，然后介绍了自行研制的分布式s4系统中逻辑时钟监控器模块的实现方法。
Firstly it discusses the approach of logical clock and revise algorithm of logical clock, then introduces the implementation approach of logical time monitor module in distributed S4 system.
说明：实现时钟的基本功能外，还能实现设置闹钟，可以选择自己喜欢的音乐作为闹铃！
To achieve the basic functions of the clock, but also to achieve set the alarm, you can choose your favorite music as your alarm clock!
论文还对通过建立主时钟实现总线系统同步通信机制进行了探讨，并给出了主时钟故障时防止系统崩溃的解决方案。
Meanwhile, the synchronizing communication realized by main clock is discussed, and the solution is brought forth to prevent system from breakdown due to main clock's fault.
为了实现水下载体高精度的定位，GPS声纳浮标需解决两个方面的技术难点：高精度的系统时钟同步和定位信号的高精度时延估计。
As for the high precision positioning of underwater targets, the GPS sonobuoy technique has two bottlenecks: high precision system clock synchronization and high accuracy time delay estimation.
采用软件模拟时序使CPU的I/O口模拟I2C总线，实现了单片机与时钟芯片、温湿度传感器、存储芯片等器件的数据交换。
With time series simulation software, the CPU's I/O ports simulate I2C bus and exchange data with clock chips, temperature humidity sensors, memory chips and other devices.
介绍了实现该平台的硬件及软件组成，重点描述了用于该平台的路由协议及时钟方式。
Both the hardware and software components of the platform are introduced, and the routing protocols and clock modes used in the platform are described in detail.
该文从消除时钟信号冗余跳变而致的无效功耗的要求出发，提出了应用并行技术和流水线技术，实现基于RTL级的双边沿触发计数器的设计。
To erase the bootless power dissipation of the redundant leap of the clock, this paper proposes the RTL design of double edge triggered counter using parallelism and pipeline technique.
该文介绍了如何利用可编程控制器的日历时钟功能，对一灯饰控制系统进行自动控制，从软件、硬件两个方面介绍了具体实现的方法。
The paper presents a lighting decoration control system, in which clocking function of PLC is used and automatic timing control of lighting decoration system may be realized.
该系统采用了片同步技术实现了采样后高速数字信号的可靠锁存，采用高精度的时钟管理芯片和设计合理的时钟路径对时钟抖动做了严格控制。
The Chip-Sync technology has been used to ensure the latch of high-speed signal, and we use high accuracy clock management chips and design reasonable clock way to strict control the clock jitter.
该设备基于AT 89c51，采用软件抗干扰技术，实现授时主系统时钟与中心UT C主钟的同步。
Adopting software anti-jamming technology, this instrument is based on AT89C51 to achieve the synchronization of the clock of time service system with UTC.
新的改进使协议不需要时钟同步机制，还能通过使用一种称为证据链的证据管理机制使协议实现效率更高。
The newly improved protocol needs no clock synchronization mechanism between principals and can be efficiently implemented by using an efficient evidence management scheme called evidence chaining.
该方法是一种基于信号采样时钟速率的全数字化处理过程，其同步精度可达到信号采样间隔的1%以上，且便于FPGA或DSP实现。
The method is a fully-digitized process at the sampling clock rate, so that it can be conveniently implemented by FPGA or DSP, whose synchronization precision can reach 1% of the sampling interval.
利用LPC 2292时钟中断的增量中断实现对当前时刻日费率表和费率类型的选择，实现分时计量。
By the increment Interrupt of LPC2292, the day type and the tariff type can be selected, and energy can be measured by different time segment.
差分时钟延迟匹配技术通过对两路AD的采样时钟进行相位调整，实现了两路AD的等间隔采样。
The difference clock delay match technology adjusts the two channel AD analog clock phase and implements the two way AD uniformly-space sampling.
提出的时钟控制电路，是利用单片机at89c 2051的16位定时器做成电子时钟，并利用电子时钟的精确定时作用实现了实时控制。
This paper presents a clock control circuit in which an electronic clock is made by a MCU AT89C2051 16-bit timer and real-time control is achieved by the electronic clock's function of precise timing.
使用准同步法，在一对usbISO端点上，成功地实现了实时全双工usb音频通信功能，简化了时钟同步系统的设计。
Using the plesiochronous communication model, implement duplex audio communication functions on twain USB ISO endpoints, simplify the design of clock synch system.
应用推荐