薄膜表面光滑、无裂纹、致密性好；
The surface of the films is smooth, homogeneous, crack free and dense.
获得了无裂纹的大面积搭接熔敷层。
As a result, large areas of overlapped clad layers are free from cracks.
检查扬水管有无裂纹，连接是否牢固。
Check whether the water pipes crack Yang, connection is solid.
轻微起皱，无裂纹，不变形。
检查扬水管有无裂纹，连接是否牢固。
Jan crack pipes to check whether or not to connect it firmly.
扫描电镜分析表明，膜的表面平整，无裂纹。
SEM micrographs showed that the films were smooth and crack-free.
修补后铸件无裂纹、无硬点、无明显分界线。
After repairing, no cracks, no hard points and no clear dividing line exist.
结果显示，合金层与基体成良好的无裂纹气孔的冶金结合。
The results show that the composite coatings have better metallurgical bond to the substrate, both crack and air hole are not found.
对蒙皮切口周边区域做高频涡流探伤检查并确定无裂纹存在。
Performing high frequency eddy current inspection of area around skin cutout and make sure that no crack existing.
再看拐角链接出有无裂纹，有没有较其他部位的颜色不同。
Then look at the corner link out of the crack, is there any different than other parts of the color.
打磨区也用着色渗透剂进行了检查，以便确保无裂纹尖端留存。
The ground area was also checked with dye-penetrant to ensure that no crack tip remained.
优质的珊瑚会显现出均衡的色彩及无裂纹无班点无纹里或无蛀洞。
High - quality coral is of an even colour and free of cracks, blotches, striations and holes.
通常，应确保工具的所有零件都正确固定住，且工具无裂纹和缺口。
In general, make sure all tool parts are secured correctly and the tool is free of cracks and chips.
本发明模仁的 离形膜附着性好，表面无裂纹，因此其使用寿命较长。
The strippable film on the substrate has high attachment, no surface cracking and long service life.
本发明涉及一种生产表面光亮、无裂纹且塑性较好的紫铜带的熔炼方法。
The invention relates to a smelting method for producing copper strips with bright surface, no crack and good plasticity.
二滩水电站已全部投运的6台机转轮经停机检查，现场焊接的主焊缝无裂纹。
The runners of 6 operated generating unit of Ertan Hydro Station have been checked and no crack on the primary weld of the field welding position is observed.
结果表明：热循环次数小于20次时，渗层表面主要产生氧化，无裂纹产生；
Oxidation happened on the surface of infiltrated layer when thermal cycling times was less than 20, and no cracks was observed.
结果25例全瓷冠桥修复体色泽自然，无裂纹和脱落，边缘密合，牙周健康。
Results the marginal fitness, color stability and strength of crowns, and gingival health were satisfactory in the 25 patients.
结果表明：所制得熔覆层组织致密、无裂纹，与基体形成了良好的冶金结合。
The results show that the cladding layer has compact and flawless microstructure and has been metallurgically integrated with pure copper substrate.
首先用加速腐蚀环境谱对无裂纹试件进行腐蚀试验，然后进行拉伸超载疲劳试验。
The tension overload fatigue tests are carried out, which are corroded under the accelerated corrosion environment in this paper.
产品外观：表面光滑，质地均匀，色泽光亮，无裂纹，黑点，和机械损伤的现象。
Product Appearance: the surface is smooth, texture is uniform, colour and lustre is bright, no crack, no dark spots, and no mechanical damage.
多层熔覆试验能形成厚度可调的无裂纹熔覆层，对生产工件的修复具有实际意义。
The coatings with varied thickness and crack-free can be obtained by multi-layer laser cladding, which will have practical significance for repairing workpieces.
采用高功率直流电弧等离子体cvd工艺制备了不同厚度的无裂纹自支撑金刚石厚膜。
Diamond film wafers with different thickness were prepared by high power DC arc plasma jet CVD method.
如果表面光滑，无裂纹，不起跑，一般说是好的。但必需得到检讨人员或船东的允许。
If the surface is smooth and there is no crack is no blisters on it, usually the painting is good.
管子应通体均匀，无裂纹、无孔眼或杂质，还应无气泡、凹痕、波痕、拉模划痕和热痕。
Pipe shall be homogeneous throughout, free from cracks, holes or foreign material, and shall be free from blisters, dents, ripples, die and heat marks.
主船体结构用钢的材料须满足船级社要求，并且无裂纹、迭片结构、表面缺陷和其他的缺陷。
Structural steel material of main hull structure to be of the quality as required by the Classification Society and shall be free of cracks, lamination, surface defects and other defects.
具有极强的附着力和颜色固着力，防水、抗渗、无裂纹、抗霉变、抗老化具有理想的装饰效果。
With strong adhesion and color solid focus, waterproof, impermeability, crack-free, anti-mildew, anti-aging has the ideal decorative effect.
该人造石台面的强 度有大幅度提高，而且表面平整度高、光泽好；防机油渗透；无裂纹和气孔。
The artificial stone table top has high strength, flat surface, high brightness, engine oil permeation resistance, and no crack and air hole.
利用积分镜对激光束进行整形获得宽带激光束，进行宽带激光熔覆获得无裂纹WC/钴基合金层。
The WC/Co-base alloy was fabricated by the wide-strip laser cladding method without cracks.
利用积分镜对激光束进行整形获得宽带激光束，进行宽带激光熔覆获得无裂纹WC/钴基合金层。
The WC/Co-base alloy was fabricated by the wide-strip laser cladding method without cracks.
应用推荐