应用激光热加载方式对复合橡胶薄膜进行了红外无损检测研究。
Infrared nondestructive test technique is applied to detect defects in combined rubber films using laser heat loading.
应用可见/近红外漫反射光谱对梨表面色泽进行无损检测研究。
Visible/near-infrared (VIS/NIR) diffuse reflectance spectra were applied to non-destructive measurement of surface color of pear.
利用数值模拟和实验研究两种手段,从频散的角度分析了基于磁致伸缩效应的导波无损检测技术在圆管检测中的应用。
In view of dispersion, the application of guided wave NDT of pipe based on magnetostrictive effect was analyzed by the combination of numerical simulation and experimental research.
利用可见/近红外光谱检测技术对赣南脐橙总酸含量的无损检测进行了相关研究。
This research work was focused on using visible/near-infrared spectroscopy detection technology for measuring the total acidity of navel orange(Ganzhou, Jiangxi).
本文针对冲击回波法在混凝土无损检测中的应用展开研究。
The applications of impact-echo method on nondestructive testing for concrete structures are researched in this paper.
为了解决这一问题,本文在分析许多学者研究成果的基础上,提出了一种基于模态的无损检测方法。
To solve this problem, in this paper, based on the analysis of other scholars' research results, a damage detection method based on mode parameter is put forward.
从激励信号和信息处理技术两方面,分析了锚杆无损检测的国内外研究现状。
The domestic and overseas research status of nondestructive detecting in rock bolts are discussed from the aspects of excitation signal and information processing technology.
综述了高光谱图像技术在农产品品质和食用安全性检测方面的研究现状及其在无损检测中的应用进展。
Current research status on application of hyper-spectral image technology in the quality of agricultural product and food safety as well as its application in non-destructive detection is reviewed.
基于锥束体积CT的涡轮叶片质量检测技术是当前无损检测领域的研究热点。
Turbine blades quality inspection technology based on Cone Beam Volume ct has become hot point of current NDT research field.
对研究新型路面缺陷无损检测设备和技术手段具有重要的现实意义。
It has practical significance for study non-destructive testing equipment and technical means of pavement concealed defect.
介绍日本在提高滑动轴承和钩舌寿命方面的研究成果及车轮热裂的无损检测。
Introduced are the research achievements in improving the service lives of sliding bearing and coupler knuckle, as well as the non destructive inspection for hot cracking in Japan.
本文以激光扫描技术、红外技术及电子技术为基础,研究并设计了一套激光扫描自动热激励红外无损检测系统。
Considering laser scanning technique, infrared method and electronic technology, studied and designed a set of infrared NDT system with laser scanning automatic heat loading method in this paper.
这对于混凝土无损检测提出了新的思路,对于分形分维在混凝土研究中的广泛应用具有积极作用。
This proposed a new idea on the concrete non-destructive inspection, and had a positive role on wide application of the concrete research with the fractal dimension.
无损检测技术运用的研究。
阐述了我国电站锅炉管道无损检测自动化技术的发展趋势,提出应积极研究、开发和推广电磁超声技术和蒸汽管道泄漏超声检测技术。
It is pointed out that the research, development and popularization of electromagnetic ultrasonic testing and ultrasonic detection of leakage in steam pipelines should be carried out.
本文是在激光全息无损检测(简称HNDT)高聚物研究中,利用有限元计算方法,对其叠层粘接缺陷在真空负压载荷下形变量进行计算。
The finite element method is used in the study of HNDT for bonding defects of polymeric substances under vacuum-pressure difference.
采用无损接触检测及交叉试验法研究了电激励信号的频率和电压对果品电特性的影响。
The influences of frequency and voltage of electric excitation signal on electric property of fruits with non-destructive and orthogonal experiment method were studied.
应用机器视觉技术研究了进行蚕茧无损检测的方法。
The method of cocoon non-destructive test was studied with the machine vision.
随着对高频电磁波理论研究的深入和广泛应用,人们越来越重视对无损检测技术的研究。
With the application of the high frequency electromagnetic wave, more and more people turned to study the non-destructive testing technology.
近年来,随着爬波理论研究的深入,爬波在无损检测领域应用也越来越广泛。
Recently, with the further research and experiment for the creeping wave theory, creeping wave testing is applied more and more popularly in nondestructive testing.
本文采用胀栓作为锚固件,研究胀栓拔出法新无损检测技术。
In this paper, the writer studied a new detecting technique-expanding bolt pullout method by using expanding bolt as bulkhead.
最后论文提出了一种研究多层介质膜光栅掩模的无损检测方法。
Finally, a novel method to detect the profile of the multi-layer dielectric grating mask without any damage is put forward here.
以一种新的、更符合实际的力学计算模型-移动荷载下粘弹性地基板系统来研究场道的无损检测理论。
This paper is absorbed in the research of the nondestructive testing theory about airport rigid pavements, which is on semi_infinit e viscoelastic foundation to moving load.
电子内窥镜在现代医疗以及工业无损检测中具有十分重要的应用价值和研究价值。
Electronic endoscope has very important applying and researching value in modern medical treatment and industrial Non-Destructive Testing (NDT) area.
本文主要设计开发了基于无损检测中涡流检测的焊缝识别处理机和研究了无损检测中的超声tofd检测的缺陷定位算法。
This paper focuses on the design and implementation of et weld detecting system and the research of TOFD crack localizing algorithm in non-destructive testing area.
作为一种无损检测仪,它对于研究新材料和新器件的内部结构问题特别有用。
As a instrument for nondestructive, SLAM is very useful to study the internal structure of new materials and new devices.
基于光热效应的热波成像检测技术应用于固体材料的无损检测是目前很有潜力的研究方向。
Thermal wave imaging detection technique based on photothermal effect applied to non-destructive detection of solid material is the research with lots of potential at this current stage.
本文对超声导波技术应用于工业管道缺陷无损检测进行了理论和实验研究。
In this paper, industry pipeline defects NDT using ultrasonic guided waves was carried out theoretically and experimentally.
在定量无损检测的研究中,K。
For approaching the quantitative non-destructive evaluation K.
在定量无损检测的研究中,K。
For approaching the quantitative non-destructive evaluation K.
应用推荐