你能让预报函数基于物件的速度、操纵或者旋转速度。
You can base this prediction function on the speed of the object, steering or rotation speed.
Processing隐藏了矩阵运算的复杂性，而提供了一些简单的函数集，它们可以实现有用的图形操作，如缩放和旋转。
Processing hides the complexity of the matrix operations and instead presents a simple set of functions with useful graphical operations such as scaling and rotation.
这些函数允许您按一个指定轴旋转。
分析迁移应力，确定了真实应力空间中的屈服函数，并采用旋转硬化规律考虑应力引起的土体各向异性。
Then the shift stresses were analyzed to specify the yield locus in true stress space and rotational hardening law was adopted to embody the anisotropy induced by stresses.
给出了正阻尼旋转电液伺服被动加载系统的结构框图和对应的传递函数。
This paper presents the structure frame and corresponding function of the rotary hydroelectric servo load system.
由于给定主曲率函数的嵌入旋转曲面存在性已得到较好证明，故使得曲面的设计成为可能。
Since the existence of embedded rotation surface with given principal curvature function is well proofed, the design and modeling of the surface becomes possible.
该方法只需对某一核合成算子进行简单的几何旋转建立合成算子函数，避免了复杂的波场外推。
A surface synthesis operator function is simply constructed by geometrically rotating a certain kernel synthesis operator, instead of complicated wave extrapolations.
针对粒子群优化算法(PSO)应用于多极值点函数易陷入局部极小值，提出旋转曲面变换(RST)方法。
Aimed at particle swarm optimization (PSO) algorithm being easily trapped into local minima value in multimodal function, a rotating surface transformation (RST) method was proposed.
利用安全函数的概率性分析方法并针对机组启停问题对系统的旋转备用需求进行评估。
In this paper the probabilistic technique of security function method is used to evaluate the spinning reserve requirements of power system.
最终选择椭圆形作为螺旋形状，采用幂函数来模拟螺旋旋转过程。
The elliptical configuration was taken for the screw and power function was adopted to simulate the rotation process of the screw.
利用所选定的旋转系统的参数值进一步训练该函数链的神经网络，从而构成分类网络。
This function link network is further trained using the parameter values of selected rotor systems, and the classifier network is formed.
以井底速度和压力作为目标函数，对旋转射流喷嘴结构参数进行了优化。
Taken the velocity and pressure at the bottom as the objective function, the structure parameters of rotary nozzle were optimized.
根据不同的跃迁运动和自由扩散运动模型导出了魔角旋转条件下的平均谱密度函数。
The average spectral density functions under MAS condition were derived from various models of jump motion and models of freely diffusive motion.
提出了实现图象几何变换的迭代函数系统(IFS)参数修改法，导出了实现图象平移、旋转和缩放的IFS参数变换公式。
A novel image geometry transformation method based on modifying IFS coefficients is proposed. Formulas for modifying IFS parameters to translate, to rotate and to dilate images are presented.
基于移位加的坐标旋转数字计算机算法是用硬件实现超越函数的最简单方法。
The CORDIC algorithm based on shift and add operations is the simplest algorithm of the transcendental function.
完成超越函数实现的数据路径设计，主要包括加法器、移位器、常数rom和旋转控制逻辑，同时针对“龙腾”C2微处理器的性能要求对各个部件进行优化设计。
Finish the design of data path, including adder, shifter, ROM and the control logic of the rotation, and optimize these parts in terms of the requirement of Longtium C2 microprocessor.
对实际旋转机械故障振动信号的分析结果表明，该方法能有效避免固有模式函数间模式混叠，提高故障诊断效果。
This method can effectively eliminate mode mixing of IMF and improve the quality of fault diagnosis through analyzing vibrating signal of rotating machine.
用模板匹配法判定图像中是否含有形变旋转后的模板，判定函数就是遗传算法的适应度函数。
Template-matching method is used to decide whether the deformed and rotated template is contained in the image, the decision function is the adaptability function (AF) of GA.
提出了一种基于角度和径向差分函数的抗平移、旋转以及尺度的图像配准算法。
An algorithm is proposed for registering images related by translation, rotation, and scale based on angular and radial difference functions.
本文提出了以相关理论为基础，以图象中圆环参数自相关函数的最大值及互相关函数的最大值旋转不变为特征的图象匹配方法。
This paper presents a match method for letter images based on the coherence theory and properties which the maximum correlative values of the ring-data, however to rotate, are constant.
应用数值传递函数方法建立了一种用于分析旋转壳静力、动力响应的截锥壳单元。
Truncated conical element is developed for analysis of revolution shells, using numerical distributed transfer function method (NDTFM).
为了避免经验模式分解(EMD)过程中不同时间尺度函数间的模式混叠，采用基于高斯白噪声加入的经验模式分解方法，并将之应用于旋转机械故障诊断中。
The EMD added Gauss white noise is proposed to avoid mode mixing of different time-scale IMF, and is applied in fault diagnosis for rotating machine.
本文提出一种用分区变分原理和样条函数相结合的有限元方法，解决组合型旋转壳受力分析问题。
A finite element method using subregion variational principle and spline function in this paper is presented to solve the problem of combined shell of revolution.
包括坏死的定时器和瞬时函数快速旋转。
Includes 30-minutes timer and momentary function for quick spins.
应用光程函数法计算出旋转对称电子光学系统的7级几何像差，给出旋转对称电磁场同时存在情况下的系统7级几何像差表示式。
The 7th order geometrical aberration of rotationally symmetrical electron optic system and their expressions are given by using the eikonal method when the electric and magnetic fields exit.
提出一种改进的维纳滤波器(WF)模型，用训练图像的均值合成维纳滤波传递函数中的参考函数，使WF具有了旋转不变识别的能力。
A modified Wiener filter (WF) model was proposed in which the reference term of WF's transfer function was synthesized using the mean of training images.
首次提出了聚合物材料熔融过程的两相柱团、固相高度变化函数及液相增长速率的概念，较为真实地刻画了聚合物在同向旋转双螺杆挤出中非充满螺槽的熔融行为。
Some new concepts are proposed, such as two phases column group of solid and melt of channels filled partially, the function of solid height which are different from t…
首次提出了聚合物材料熔融过程的两相柱团、固相高度变化函数及液相增长速率的概念，较为真实地刻画了聚合物在同向旋转双螺杆挤出中非充满螺槽的熔融行为。
Some new concepts are proposed, such as two phases column group of solid and melt of channels filled partially, the function of solid height which are different from t…
应用推荐