本文用解析法确定圆柱与斜圆柱、圆锥与半球及斜圆柱与圆锥的交线上特殊点的投影。
The projection of the special points on the intersection line of cylinder with oblique cylinder , of cone with half sphere and of oblique cylinder with cone are determined with the analytic method.
本文论述了变位直、斜圆柱齿轮快速测算法。这种测算法不仅测量参数简便，而且计算公式也简单。
The present paper describes the rapid determining method of profile modified straight bevel gear. The method is not only easy in parameter measure but also brief in formula calculation.
分析齿轮主要参数，提出用测量跨棒（）和公法线长度计算斜齿圆柱齿轮螺旋角的测绘方法，并推导出螺旋角的计算公式。
In this paper calculating method of lead angle of helical gear by measuring span length of length bar and base tangent length is put forward and lead angle calculating formula is deducel.
齿轮箱：200渐开线圆柱斜齿轮，铸造合金钢活塞。
D. Gear box: 200 Involute cylinder Bevel wheel, cast alloy steel piston.
单级斜齿圆柱齿轮减速器的优化设计，是一个多目标优化问题。
The single stage skewed tooth cylindrical gears reduction gear optimized design, is a multi-objective optimization question.
介绍了两级直齿圆锥—斜齿圆柱齿轮减速器等强度优化设计的数学模型及优化方法的选取。
In this paper, a mathematical model and the selection of optimization method for equal strength optimized design of two-stage straight bevel gear-helical cylindrical gear reducer are introduced.
现行渐开线蜗杆的M值计算公式是由斜齿圆柱齿轮的计算公式导出的。
Original calculative formula for M value of involute worn is educe by calculative formula of M value for inclined tooth cylinder gear.
该机床适用于批量及单件生产加工圆柱直齿轮、斜齿轮、 链轮及蜗轮。
This series machine is suitable for batch or single manufacturing column straight pinions, slope pinions, helical gear and worm gear.
本课题开发了直齿圆柱齿轮传动、斜齿圆柱齿轮传动和直齿圆锥齿轮传动CAD系统。
The transmission CAD system also includes diagonal tooth cylinder gear and straight tooth taper gear transmission CAD system.
圆柱形压力容器斜接管的应力计算还没有一个简便可行的计算公式。
There was no simple method to calculate the stress of oblique nozzle in the cylindrical pressure vessel.
圆柱蜗杆斜齿轮传动是在传统的蜗杆蜗轮传动中用斜齿轮取代蜗轮而形成一种新的蜗杆传动形式。
Involute cylindrical worm-helical gear transmission is to use helical gears to replace worm wheels in traditional worm wheel transmission so as to form a new worm transmission.
对于渐开线圆柱斜齿轮的三维建模在以前来说是相当困难的。
It was very difficult that the three-dimensional modeling to involute-column-bevel gear before.
在应用无差动法滚切斜齿圆柱齿轮的基础上，通过理论推导和实验验证，得出进一步减少斜齿轮齿向误差的可行的挂轮选配新方法。
Through theoretical derivation and experimental verification, a new method is obtained for further reducing tooth curve error of oblique gear and for choosing feed gear wheel.
建立了斜齿圆柱齿轮侧面及齿根面的直角坐标方程序，应用矢量法确定盘形铣刀齿刃与轮齿侧面及齿根面接触线上各点的参数值。
Parametric values on the contact lines of disc cutter blade and the side surface cogwheel, disc cutter blade and gear root surface are determined by using vector method.
借助一个渐开线斜齿圆柱齿轮的刀具齿面推导出蜗杆砂轮齿面，由蜗杆砂轮齿面经双参数包络生成斜齿面齿轮齿面。
Using a helical involute pinion surface to form the grinding worm surface, a helical face gear is formed via a two-parameter worm envelope.
对二级斜齿圆柱齿轮减速器进行多目标优化。
This paper presents the mult-goal optimal design of the two-grade helical cylindrical gear retarder.
齿轮滚刀常用的加工外啮合直齿和斜齿圆柱齿轮的刀具。
The processing of gear hob used the meshing straight teeth and helical cylindrical gears of cutting tools.
因此本文对渐开线斜齿圆柱齿轮的修形方法及修形量进行进一步探讨。
So this article research on the involute helical gear modification method and modification of the amount.
渐开线斜齿圆柱齿轮由于重合度大、传动平稳被广泛应用在机械、矿山、冶金、航空航天等各个领域。
Involute helical gear have large coincidence and transmission stably, so it was widely used in machinery, mining, metallurgy, aerospace and other fields.
工业齿轮油广泛用于各种圆柱齿轮、斜齿轮、正齿轮及直、斜、螺旋伞齿轮等齿轮传动装置。
Industrial gear oils are extensively used for various gear transmission devices, such as column, bevel, spur gears and etc.
提出了提高多级斜齿圆柱齿轮传动系统动态性能优化设计方法。
The many stage helical gear train system optimal design which takes the dynamic properties as an objective function is presented.
适用于检查7级或低于7级精度的内外齿合直齿与斜齿圆柱齿轮的周节偏差。操作简便，易于维修，可供各工厂计量室及车间使用。
This tester is suitable to measure accuracies of pitch deviation with inside and outside straight helical circular gear among seventh degree. Easy to operate and maintenance.
在此基础上，采用先进的建模软件和分析技术对渐开线斜齿圆柱进行了修形方法的探讨和修形量的计算。
On this basis, using advantage modeling software and analysis repairing involute helical gear and methods of amount modification.
用于检查直齿及斜齿的外齿合圆柱齿轮的基节偏差，并使用高精度的测微表指示。
This tester is suitable to measuring the bapitch deviation of straight and helical circular gear, the accuracy value has been indicated.
我们帮您人工翻译，但要付费，有意加我扣扣。利用有限元软件ANSYS的命令流和参数化设计语言（APDL）建立渐开线标准斜齿圆柱齿轮啮合对的三维模型。
Using finite element software ANSYS command flow and parametric design language (APDL) to establish standard involute cylindrical bevel wheel of 3d model of meshing.
我们帮您人工翻译，但要付费，有意加我扣扣。利用有限元软件ANSYS的命令流和参数化设计语言（APDL）建立渐开线标准斜齿圆柱齿轮啮合对的三维模型。
Using finite element software ANSYS command flow and parametric design language (APDL) to establish standard involute cylindrical bevel wheel of 3d model of meshing.
应用推荐