给出了铜蒸气激光器放电电路各参数的表达式及取值。
The expressions or values of discharge circle parameters for copper vapor laser are presented.
本延迟电路的电容电量能通过所述放电电路迅速释放。
The electric quantity of the capacitance in the delay circuit can be discharged rapidly through the discharge circuit.
其中充电电路、储能电容、放电电路依次连接，构成一个回路；
The high-voltage pulse generating circuit comprises a charging circuit and a discharging circuit.
放电电路可操作用于将到焊盘的esd脉冲放电至地(203)。
The discharge circuit is operable to discharge the ESD pulse to the pad, to ground (203).
该电路由差动比较器、精确电流产生电路、充放电电路及其控制电路组成。
It is composed of a differential comparator, an accurate current generator, and a charge and discharge circuit with its control circuit.
设计出用于阵列MPPT的DC／DC电路和具有蓄电池分组充、放电电路。
A charging (discharging) circuit for storage battery and a DC/DC circuit for MPPT of array are designed.
文中介绍了由直流高压电路、脉冲放电电路和一级脉冲磁压缩电路组成的铜蒸气激光器电源。
The supply power of copper vapor laser (CVL) consisting of DC high voltage circuit, pulse discharge circuit and one stage magnetic pulse compression circuit is introduced here.
电容器从放电电路断开以后，电容器中保持剩余的电荷，从而在电容器的端子之间重新建立起电压。
After a capacitor is disconnected from a discharge circuit, a residual charge remains on the capacitor, so a voltage is re-established across the capacitor terminals.
先利用混沌充放电电路将输入模拟量采集成一组二进制序列，然后对其进行分析，得到输入量的准确估计值。
Chaos circuit charge an analog input into a group of binary sequences collection, then analysis and get the accurate measuring inputs.
在典型的R LC振荡放电电路中，引入5 5 5时基电路和水银继电器作为控制电路，设计了阻尼正弦瞬变信号发生器。
In typical R-L-C resonance circuit, the 555-time-circuit and mercury relay are used as control unit. A damped sinusoid source is designed. It has been proved that the source satisfies our request.
在20世纪60年代早期，研究人员试图将火箭尾部的电线发射到雷云中，以便于为这些雷云产生的巨大电荷建立一个简单的放电路径。
In the early 1960s, researchers tried firing rockets trailing wires into thunderclouds to set up an easy discharge path for the huge electric charges that these clouds generate.
放电时，离子回流，这个过程中会在连接到电池的外部电路中产生电流。
When it is discharging, the ions flow back and in the process cause a current to flow in an external circuit attached to the battery.
电池放电时，正极释放出的锂离子快速运动回到负极，充电过程中在负极由锂离子携带的电子被释放出来，从而为外部电路提供电力。
As they do so, the electrons that were paired with them in the anode during the charging process are released. These electrons power an external circuit.
在锂电池充电时，锂离子从正极向负极移动，而在锂电池放电时，锂离子从负极向正极回流，为连接在锂电池的外接电路提供电流。
When the thing is discharged, the ions flow back and in the process cause a current to flow in an external circuit attached to the battery.
例如，放置活化材料的一层，当它被光照时，便会释放电子，而电路层则负责传送电子流。
For example, one layer contains the active material that releases an electron when it's struck by light and another layer contains the circuit that carries the current.
它们能被用来保护电路不受静电放电和其它高压冲击。
They can be used to protect circuits from electrostatic discharge and other high voltage surges.
此外，通过模拟的手段，分析了各种电路参数对放电电流波形的影响。
Moreover, by the means of simulation, the influence of circuit parameters on the current wave were investigated.
这样，在不测量该电阻器时，该电阻两端存在的电荷就会通过电路的LO端放电。
This allows any charge across the resistance to be discharged to circuit lo when the resistance is not being measured.
用实验方法研究了正、负离子背景对放电路径的影响。
The effects of the positive and negative ion background on the discharge path are studied.
采用INTEL 80c51单片机做为纯氢发生器的控制核心，配备必要的外围接口电路及功放电路对制氢生产工艺进行控制。
Adoption INTEL80C51 single chip microcomputer as control core for producing pure hydrogen, it can control production the craft with necessary interface circuit and power amplifier circuit.
文中着重阐述系统和功放电路的工作原理、数字脉宽调制器的硬件电路、软件设计方法，并给出实验结果。
In this paper, the operation principles of the total system and power-amplifier circuit, design method of digital PWM hardware circuit and software are described, and.
本文提出一种新的基于生成的CMOS运放电路拓扑结构自动综合方法和模拟电路的数据阵列描述方法。
We present a method for automatic synthesis of CMOS op-amp circuit and a data array description method of analog circuit.
该音乐存储和回放电路包括乐谱存储模块、音符产生模块、声音输出模块和点阵显示模块等。
The circuit consistute of the rhythm memory block, the notes generation block, the voice output block and the dot array display block.
然后对扭矩仪的电源部分进行了设计，并通过实验数据对功放电路的输出功率和变压器的传输效率的关系作了深入的研究。
Then the power circuit is designed. at last, with analysis of experiment data the relation of power output and transmission efficiency of transformer is researched in detail.
为了提高功放电路的效率，电路被不断改进。
To improve efficiency of power amplification circuit, circuits is being improved ceaselessly.
可选双功放电路，波罗的海桦木箱体，多层催化涂漆，可选白色，灰色或不涂漆。
Optional bi-amp circuitry. Baltic birch plywood enclosure with catalyzed multi-layered finish, available in white, gray and unfinished.
利用超声波智能测距传感器及语音录放电路，设计了机动车倒车防撞语音提示器。
Using ultrasonic wave intelligent distance-measuring sensor and voice record-reproducing circuit, a voice anticollision-prompting device for backing an automobile is designed.
该模块由高速前放电路，数字逻辑电路，强度调制器驱动电路，自动增益控制电路，以及强度调制器组成。
The module is made of high speed amplifier, AGC circuit, digital logical circuit, intensity modulator drive circuit, and intensity modulator.
该模块由高速前放电路，数字逻辑电路，强度调制器驱动电路，自动增益控制电路，以及强度调制器组成。
The module is made of high speed amplifier, AGC circuit, digital logical circuit, intensity modulator drive circuit, and intensity modulator.
应用推荐