由数据和控制链路连接在一起的活动包含业务流程。
Activities connected by data and control links comprise business processes.
通过控制链路状态信息的洪泛,LEO卫星只需掌握局部拓扑即可完成短距业务通信,长距通信业务则由MEO卫星承载。
By controlling flood of link state information, LEO satellites could acquire local topology information to route the short-distance traffics. The long-distance traffics were routed in MEO layer.
这些命令涉及文件、流、普通数据链路控制以及其他各种设备。
The commands cover files, streams, generic data link control, and various other devices.
我们的Rosetta技术支持信息交流,提供无缝网络互操作性和数据链路控制。
Our Rosetta Technology supported this exchange of information by providing seamless network interoperability and data link control.
IrLAP是负责IrDa设备发现、重传以及流控制的链路存取协议层。
IrLAP is the link accesses protocol layer responsible for IrDa device discovery, retransmission, and flow control.
用户根据探测的链路带宽和本地网络的业务状态,对未来状态进行预测,并主动控制自己的网络行为。
An Internet user could predict the future status based on the link bandwidth and the local traffic, and then control his own network behavior.
EXACTO项目的主承包商为Teledyne科技影像公司,该公司授权Cubic公司为火控制导子系统研发光学指挥链路组件。
Cubic is under contract to Teledyne Scientific & Imaging LLC, prime contractor for the EXACTO program, to develop optical command link components for the fire control and guidance subsystems.
模型引入了分组调度器、通道分配器及链路状态反馈控制机制。
The model includes packet scheduler, channel distributor and link status feedback control mechanism.
拥塞控制算法主要分为两部分:在端系统上使用的源算法和在网络设备上使用的链路算法。
The congestion control algorithm mainly divides into two parts: source algorithm which USES on the end system and the link algorithm which USES on the network equipment.
拥塞控制的目标就是要达到链路吞吐量的最大化、分组延迟的最小化和各用户之间资源分配的合理化。
The goals of Internet congestion control are maximization of throughput, minimization of the average delay of packets and fair allocation of resources among users.
所提算法通过使用的剩余能量和链路路径上的ETX值,来随机控制RREQ包的数量,从而有利于节能路由的建立。
The proposed EEPR algorithm stochastically controls the number of the RREQ packets using the residual energy and ETX value of a link on the path and thus facilitates energy-efficient route setup.
数据链路:两个或多个通信站之间的调制解调器、控制器或通信线路。
Data link: The communications lines, modems and controls between two or more data communications stations.
功率控制分前向链路(下行链路)、反向链路(上行链路)功率控制。
Power control consists of forward link (downlink) power control and backward link (uplink) power control.
在已改进的最优化流控模型和链路价格算法的基础上,提出了一种基于最优化流控模型的拥塞控制算法。
On the basis of the improved optimization flow control model and link price algorithm, presented an optimization flow control model-based congestion control algorithm.
本文只针对该系统中的一项关键技术—前向链路功率控制进行分析。
In this paper, we only focus on one key technology in the LAS-CDMA system, forward link power control.
本文考虑链路增益时变情况下的功率控制问题,给出了一个二进制反馈功率控制算法,并证明了算法的收敛性。
In this dissertation, a binary feedback power control is presented when link gains are assumed to be time varying and only one bit is sent back to each transmitter.
其统计结果对卫星通讯链路设计、自适应功率控制、雷达跟踪等方面有参考意义。
The main results for spectra analysing are outlined. The statistics is useful for designing radio link, adaptive power control and radar tracking.
无线at M网络中,在信元进入AT M网络层前,须通过逻辑链路控制(llc)层来消除无线信道的影响。
In wireless network, a logical link control (LLC) layer is necessary to mitigate the effect of radio channel error before cells are released to the ATM network layer.
有可能发生因维护、升级或维修、因远程通信链路失败或不受我们控制的设备而导致的问题,引起本服务受到干扰。
There will be occasions when the Service will be interrupted for maintenance, upgrades or repairs, or as a result of failure of telecommunications links or equipment that are beyond our control.
主要讨论了通信网络的拓扑结构、通信链路控制及通信软件设计等问题。
Topology construction of communication network, line control of communication and the software design are mainly discussed.
网络层的链路带宽与有效带宽直接反映了端到端路径的基本状况,是对网络进行性能管理和服务质量控制的基础。
In network layer link bandwidth and available bandwidth capture the relevant properties of network path, which is baseline of performance management and QoS control.
同时,利用经典控制理论方法分析了系统稳定性和存在链路容量干扰时瓶颈队列的暂态、稳态特性。
A classical control method is also introduced to analyze the stability of the system and the transients as well as steady-state behaviors of bottleneck queue with link capacity disturbances.
拥塞控制算法由TCP源算法和IP链路主动队列管理算法构成。
Congestion control algorithms are composed of TCP source algorithm and IP link active queue management algorithm.
在接入层设备上,利用加权平均队列(WFQ)技术对窄带的链路进行拥塞控制。
Using WFQ (weighted fair queuing) in the network linked layer equipment we can proceed to deal with network line jam control.
该调度算法适合于有优先级控制的广播链路。
This scheduling algorithms can also be applied to broadcast links with priority requirement.
为了更好的降低系统传输信息的误比特率(BER),本文针对TD - SCDMA系统的功率控制模块,研究一种适用于反向链路的自适应功率控制算法。
In order to decrease the Bit Error Rate (BER) of transmission information, this paper studies an adaptive power control algorithm for uplink against the power control module of TD-SCDMA system.
无线通讯系统,无线网络控制器,移动站和下行链路传输能量控制方法。
Radio communication system, radio network controller, mobile station and down link transmission power control method.
在LTE上行链路,通过完成闭环功率控制命令对系统的性能进一步优化。
In LTE Uplink, further optimization of the system performance can be done via closed loop power control commands.
在分析上行链路干扰的基础上,兼顾移动性提出了一种分层小区系统的多业务呼叫接纳控制策略。
On this basis, the uplink interference is analyzed and a multi service call access control strategy is proposed.
在分析上行链路干扰的基础上,兼顾移动性提出了一种分层小区系统的多业务呼叫接纳控制策略。
On this basis, the uplink interference is analyzed and a multi service call access control strategy is proposed.
应用推荐