移动控制点就可以改变曲线的形状。
A handle point may be moved to alter the shape of the curve.
使用改装命令使用0,1公差，以减少控制点，由此产生的曲线公差范围内。
Use the refit command using 0, 1 tolerance to reduce the control points on the resulting curves within tolerance.
详细介绍了用公路路线上控制点坐标进行公路直线和曲线平面位置定线的数学模型。
This paper introduces the mathematical model for highway route alignment. This model can determine plan position of highway straight and curve by the control points.
这将创建手柄，用来控制那个点的曲线的尺寸和形状。
This will create handles that can be used to control the size and shape of the curve at that point.
重建曲线至少有6个控制点。这是必要的，以实现理想的连续性当使用曲线表面从网络或扫描第2轨。
Rebuild the curve with at least 6 control points. This is necessary to achieve the desired continuity when using surface from curve network or sweep 2 rails.
首先对单调NC轨迹曲线进行绘制，进一步用不求极值点坐标而实现自动控制变向的方法，求出NC加工轨迹；
To do this, the monotone curve is firstly drawn, and then without finding the coordinate of the inflexion point, the NC machining path can be obtained by the method of automatic direction control.
有很多曲线控制点的调整才能得到理想的截面。
There are a lot of curve control points adjustments to be done before getting the desired sections.
在大量试验的基础上，整定出两条锌点炉炉温程序控制设定温度曲线。
Based on lots of experiments, two temperature curves of Zinc freezing point stove with program control are established.
有针对性的吸管样品添加一个新的层面注入色彩曲线控制点，达到指定目标的颜色，中性色，或色彩校正。
Targetted Eyedropper Samples add a new dimension to color correction by injecting curve control points to achieve a specified target color, neutral color, or hue.
以长桩结构能够承受的最大弯矩和吊点力不为负值作为限制条件，得出安全作业跨距和倾角参数控制曲线。
With the limitations of the maximal bearable bending moment and the positive lifting force, the controlling parameter curves of span and lifting Angle are then acquired to guide the safety operation.
小波光顺时，通过丢弃细节曲线，保留近似曲线，既保留了原曲线的总体形状，又减少了控制点，最终达到小波光顺的目的。
The whole form of original curve is retained and control points is reduced with discarding detail curve and retaining approximate curve, so the target of fairness is reached.
改进部分包括：基于不规则曲线特征点分类的样条插值和精度控制；
The ameliorated part include: B-spline inserting and precision controling based on classing feature point of the irregular curve characteristic;
本文论述了在路线工程曲线段“交点”附近设立2 ~3个能相互通视的控制点对曲线段进行较高精度放样的新方法。
This paper introduces a method of curve setting out in route construction, in which 2 or 3 control points are placed at the intersected point of the curve.
NURBS方法在实际应用中遇到的一个重要问题就是已知曲线曲面上的型值点而求解控制点。
An important problem which is brought about by the method of NURBS in practice is that calculating control points based on the curve or surfaces data points.
创建罩采用曲线曲线2意见和改装，以减少他们的控制点。
Create the hood curves using curve from 2 views and refit them to reduce the control points.
其中曲线拟合是一个在给定误差下进行曲线逼近的过程，当曲线拟合完成之后，整个曲面的控制点的数目也就确定了。
Curve fitting is a curve approaching process under definite error and the number of control points throughout surface is ascertained after curve fitting completed.
介绍了利用线路平面控制网的控制点测设道路工程中组合曲线中线桩点位的坐标计算、测设方法。
A method for calculating and measuring the coordinates of centering stakes using line control counts in plane control meshwork is introduced in highway construction in this paper.
在算法中，所有的B3样条曲线的控制点可以通过对多边形的顶点简单计算产生。
The control points of the B3-spline to be constructed are computed simply by the vertices of the given polygon.
曲线表示式中带有一个局部形状参数，随着一个局部形状参数值的增大，所给曲线将局部地接近插值点构成的控制多边形。
As the increase o the value of a shape parameter, the curves approach locally the control polygon constructed by the interpolation points.
在大量试验的基础上，整定出两条锡点炉炉温程序控制设定温度曲线。
Based on the experiments, two temperature setting curves of tin freezing point stove are established.
超精密数控车床加工精度的提高不仅依赖于数控装置的运算速度和曲线的拟合精度，同时还依赖于伺服系统的跟踪精度和点位控制精度。
The manufacture precision of super exactitude NC lathe depends on not only the operation rate of NC deviceand joined precision, but also the error of track and point location about servo system.
即把动态特性曲线经过科学修正以后，在谷点时间到达阶段，根据谷点到达时间的提前或滞后，分别采用单输入单输出和双输入单输出模糊控制器进行控制；
Namely, after modifying dynamic curve, in the period of valley point , a single output fuzzy controller and a double output were applied respectively depending on advance or lag of valley point time.
此算法自动找出NURBS曲线需要修改的那一点，局部修改控制多边形，使生成的新曲线更加光顺。
The algorithm automatically identifies the point at which the NURBS curve has to be faired. Modifying locally the control polygon, the algorithm yields a NURBS curve with improved fairness.
每条后续曲线只需要三个点：两个控制点和一个结束点。
Each subsequent curve needs exactly three more points: two more control points and an ending point.
描述形状的重要特征是物体的轮廓曲线，为了提高识别效率，通常使用控制点表达轮廓。
An important feature of shape description is the contour curves of object. To improve the efficiency of recognition, dominant points are usually used to represent the contour.
导出了隧道控制测量中缓和曲线理论投点曲线长的直接求解公式。
The direct solution formula for the curve length of a theoretical control point on the transition curve is proposed, with the solution of high order equation being avoided.
为第一条曲线创建起始点、结束点和两个控制点；为第二条曲线创建结束点和两个控制点。
Creates the start, end, and two control points for a first curve and endpoint and two control points for a second curve.
为第一条曲线创建起始点、结束点和两个控制点；为第二条曲线创建结束点和两个控制点。
Creates the start, end, and two control points for a first curve and endpoint and two control points for a second curve.
应用推荐