第三部分是HX期货经纪公司的风险控制方案设计；
The third part designs corresponding risk-controlling plan of HX Company.
重点介绍液化气吸收塔双界面选择性控制方案设计与实施过程。
The design and implement of the bi interface selective control plan in LPG absorber is introduced.
该模型将被用于柴油机控制系统的性能分析和控制方案设计中。
This nonlinear model can be used to design and analyze the control system of diesel engine.
该项研究对操纵负荷系统的性能分析及利用PID控制方案设计控制系统具有一定的参考价值。
This study provides a reference for analyzing performance of control load system and applying PID control project to design control system.
最后利用所提出的控制方案设计了ASV飞行控制系统，仿真结果表明了控制方案的有效性和鲁棒性。
Finally, the flight control system of an ASV was designed based on the proposed method. Simulation results demonstrate the effectiveness and robustness of the approach.
为提高质子交换膜燃料电池（PEMFC）的输出性能，基于其输出功率的一阶滞后数学模型进行了二自由度PID控制方案设计（此处有删去）；
To improve the output performance of the proton exchange membrane fuel cell (PEMFC), two-degree-of-freedom (2DOF)PID control scheme is proposed based on the model of output power in this paper.
介绍了系统结构，总体方案设计，硬件设计和软件控制流程。
System structure, scheme design, hard - ware design and software control process are introduced.
最后，在方案设计基础上实现本认证与访问控制系统，结合RADIUS认证服务器构建实验系统平台。
At last, it achieved user authentication access control system on the foundation of scheme design, and constructing experiment platform combining RADIUS authentication server.
选定了成本控制方法，就进入了实际的方案设计阶段。
After selecting the cost control method, enters the actual plan design phase.
在具体的方案设计上，一是强化控制人工成本的措施，即控制和减少员工数量；
On the concrete project design, first, we should enhance the measurement of labor cost controlling that is to control and reduce the employee quantity.
介绍了基于TMS320F2812交流伺服电机控制系统的整体方案设计。
The whole project design of the AC servo motor control system based on TMS320F2812 is introduced.
性能研究表明，自适应调速系统的方案设计是正确的，控制效果优于常规系统。
The research shows that the proposed scheme of the adaptive speed-control system is correct and the control result of the adaptive system is better than the standard system.
论文在对行列式制瓶机的系统需求进行深入分析的基础上，讨论了行列式制瓶机控制系统的总体方案设计；
Firstly, the thesis discusses the general design plan of control system for I. S. forming machine on the basis of analyzing requirement of I. S. forming machine.
用这种方案设计的姿态控制系统有非常好的灵活性。
The attitude control system designed with this concept has better flexibility.
分析了铁路客车噪声控制中阻尼材料的选择原则和选用阻尼材料的特点，阐述了车体阻尼处理结构的方案设计，并进行了现车试验及其结果分析。
The scheme design of damping treatment structures for the body of railway passenger cars is expounded, then the experiment on cars in use and the analysis of the experimental results are performed.
其中包括进行总体方案设计、机械结构设计、并设计装配图和重要的零件校核，运动控制卡的介绍。
Including overall program design, mechanical structural design, and design assembly drawings and important parts of the check, motion control card introduction.
本文针对石油化工领域中干酪根复杂制备过程，提出了一种以CAN总线为基础的干酪根自动制备控制系统方案设计。
Considering complex preparation of kerogen in the petrochemical field, This paper introduces a program of kerogen complex preparation control system based on CAN bus.
完成了整个系统的总体方案设计以及健身控制、视频播放和画面叠加等部分功能的实现。
The main project design and some functions like fitness control and OSD have been carried out.
证明本文提出的间歇控制现场总线实现方案设计合理，切实可行，为现场总线在工业控制领域的进一步应用作了有益的尝试。
This proves the scheme design properly and practically, which realizes batch control by FCS. This paper makes valuable attempt for field-bus' further application on industry control field.
本文针对动力传动控制系统的特点提出了一种系统方案，并根据方案设计了柴油机控制模块和自动变速模块。
In this paper, a scheme of powertrain control system was presented, and based on which the diesel control module and automatic gear shifting module were designed.
通过研究钻机方案设计过程，首次提出了钻机方案设计专家系统的控制策略和推理机制。
It also presents the control strategy and deducing machine of drill machine's scheme design expert system.
所以本课题中研究的城市体形设计并不是一次性完成的方案设计，而是对城市体形的各个方面进行指导和控制。
So the urban figure design in this disquisition it is not the conceptual design of disposable completion, guiding and controlling all respects of urban figure.
本文首先对压铸机实时控制压射系统进行了方案设计，其中包括压射系统液压回路的设计、控制方案的确定及其硬件的选型和软件框架设计。
Firstly, the blue print of injection system of die-casting, which includes hydraulic circle design, control scheme design, hardware choose, software structure design, is presented.
在项目作出决策后，控制工程造价的关键就在于设计阶段，而设计阶段中的方案设计阶段又尤为重要。
After the planning, the key point of cost control is in the design stage, and in which the schematic design is the most important.
通过对大量的系统的虚拟反馈控制实验的结果进行对比和整理，本文工作为FAST馈源支撑系统的方案设计提供了建议和参考。
Quite a lot of result data from systematic virtual feedback control experiments are processed and provide design advices and reference for construction of the feed support system for FAST.
主要内容包括控制系统的方案设计、PLC控制程序设计。
Main content including control system plan designs, PLC control procedure design.
对此自动拼搭系统进行了方案设计，并对其决策控制环节、现有资源的分类管理模式和方法以及关系数据库和规则集的建立进行了研究。
Design of the system included the design of the decision and control segment, the management mode and method of assorting resources and relation data bank and rule collection building.
按照上述方案设计开发了该灌溉控制器，经实验应用，灌溉控制器可以实现相关功能。
The irrigation controller is developed according to the scheme presented above, and experiment has improved that irrigation control functions can be achieved.
利用该方案设计的鲁棒控制器可确保相应闭环系统的状态一致最终有界。
The designed controller guarantees that the state of the obtained closed loop system is uniformly ultimately bounded.
利用该方案设计的鲁棒控制器可确保相应闭环系统的状态一致最终有界。
The designed controller guarantees that the state of the obtained closed loop system is uniformly ultimately bounded.
应用推荐