按此控轧控冷工艺能生产出高等级优质钢筋。
High grade and high quality reinforcing steel bar can be produced according to this control rolling and cooling process.
细晶粒低碳钢生产的关键技术在于控轧控冷。
The key technique of hot rolling low carbon ultra-fine grained steel strip consists in controlled rolling and controlled cooling.
上述结论为X80管线钢控轧控冷工艺制定提供依据。
The conclusions provide the basis to controlled rolling and controlled cooling of X80 pipeline steel.
通过控轧控冷工艺提高了带钢综合性能，节约了生产成本。
Adoption of the CRCC process improves the general property of strips and reduces the production cost.
介绍了攀钢线材厂线材生产线热处理工艺及控冷工艺流程。
Heat treatment technology and control cooling technology course of wire rod production line in Pangang wire rod Plant are described.
通过优化控冷工艺，线材组织更均匀，扭转指标大为改善。
Optimizing control cooling process can make microstructure of wire rod more even and increase torsion number.
这就为制定含钒中碳钢加热制度和控冷工艺提供了基本条件。
These special features provide a basic condition for calefaction system and controlled cooling processes of vanadium middle carbon steel.
这些技术已在国内多家中厚板淬火与控冷系统中成功获得应用。
These technologies have been successfully used in the design and control for plate quenching and controlled cooling systems.
利用热模拟技术研究了超高强度船板钢形变后控冷过程中相变行为。
Phase transformation behavior of ultra high strength structural ship steel in controlled cooling after deformation are studied by mean of hot-simulation technology.
本文通过对Q 3 4 5d钢加入微量合金元素V并进行控轧控冷试验。
This paper carries out controlled rolling and controlled cooling test by means of adding microalloy element V to Q345D steel.
用金相方法观察了采用临界奥氏体控轧控冷工艺生产的带肋钢筋的组织及其分布。
The microstructure and its distribution of ribbed bar, produced by critical austenite control rolling and control cooling, were observed by means of microscope.
介绍国内部分中厚板厂中采用的控冷方式，并提出了应用控冷技术应该解决的几个问题。
Controlled cooling ways adopted by some domestic rolling plants are introduced. In addition, some key problems to be solved in the application are also given.
我公司通过采用炉外精炼、电磁搅拌、优化控轧控冷参数等手段，提高了产品实物质量。
The product quality is improved by means of smelting outside oven, electromagnetic stirring and optimizing rolling control and coldness control data.
分析了首钢中厚板轧后处理中的水幕控冷工艺过程，提出了一种双闭环流量比值模糊控制系统方案。
The water-curtain controlled cooling process after rolling steel plate in Shougang Group is analyzed, then a double closed-loop fuzzy control scheme for flow ratio is proposed.
结果表明，在具有低温轧制能力的高线轧机生产线上，采用控轧控冷工艺生产高强度钢筋是可行的。
The result shows that production of high strength screw bars is reasonable by the control rolling and control cooling process on high-speed wire mill with the capacity of low temperature rolling.
宝钢车轮用热轧酸洗钢带是采用控轧控冷工艺生产的具有优良冷成形性能和焊接性能的低碳微合金化钢。
Hot-rolled pickled steel for automotive wheel is low carbon micro-alloyed steel with excellent properties of cold forming and welding produced by using advanced TMCP technology.
利用微合金化技术及ASP连铸连轧工艺和控轧控冷工艺，济钢自主研发了S450热轧管线钢带产品。
S450 hot rolled strips for line pipe is researched and developed through the technology microalloying, ASP and the processes of controlled rolling and controlled cooling in Jinan Iron and Steel co.
针对其中采用的前馈控制与自学习策略、数学模型的设定、修正计算和控冷过程跟踪控制等作了深入的分析。
Moreover, the adopting feedforward control and self-learning strategy, mathematics model enactment and revision calculation and control cooling process control etc analysed deeply.
结果表明，控轧控冷代替常规轧后回火工艺的途径是可行的，并有力地支持了粒状贝氏体的扩散型长大学说。
The replacement of tempering after rolling with TMCP for bainite transformation in SBL steel is a kind of diffusion type.
宝钢高扩孔用热轧酸洗钢带是采用先进的控轧控冷技术生产的具有高的扩孔率、优良的成形性能和焊接性能。
Using advanced TMCP technology, Baosteel's hot-rolled pickled strip for high hole expansion has high expansion rate and excellent forming and welding properties.
介绍了控制轧制技术在小型材生产中的应用，以及几种典型的控轧控冷工艺布置，可为小型生产厂家提供参考。
Its application in the small section production was introduced. Meanwhile, several types of processing arrangement were put forward, which are references for small section production industries.
结果表明，通过成分调整和合理的轧后控冷，能够用低合金替代传统的V微合金化工艺进行HRB400螺纹钢筋的生产。
The results show that producing HRB400 reinforced bar can substitute low alloy for conventional V microalloy process by composition adjusting and rational cooling control after rolling.
在热模拟试验机上研究了控轧控冷工艺对微合金化低碳贝氏体型非调质钢组织性能的影响，并探讨了贝氏体转变机制问题。
The effect of TMCP parameters on microstructure and property was studied, and a controversial question about bainite transformation mechanism also was discussed.
根据螺纹钢筋轧后控冷中的热交换特点，从理论上进行了分析与推导，并利用数学方法进行简化，得到结构简单实用的数学模型。
In this paper, a model was deduced from the heating exchange of screw rod in cooling and was simplified with mathematics. Its construction was simple and practical.
在此基础上对于不同控冷条件下的自回火温度进行了计算，对计算结果的分析得到了控冷过程中各个控冷工艺参数对自回火温度的影响规律。
According to this result, self tempering temperature of the bar under different control cooling condition was calculated, the process parameter affecting the self tempering temperature is obtained.
结合水幕冷却的实际应用情况，对水幕冷却方式的特点、控冷模型及其计算机系统进行了全面的分析，为改进我国中厚板控制冷却系统提供了范。
The characteristics of the water curtain cooling model, controlled cooling model and its computer system were analyzed according to the practical application condition.
对舞钢采用控轧控冷工艺生产的低碳微合金钢的组织形貌及其形成条件进行了分析，认为组织细化是保证低碳微合金钢良好强韧性配合的重要因素。
The microstructure characteristic and its forming conditions of the low-carbon microalloyed steels were analysed, which were produced by controlled rolling and cooling in Wuyang Iron and Steel Co Ltd.
然后本文对某个具体的冷机群控项目设计作了详细的说明。
Then this article describes a real Chiller Plant Control project design in detail.
本文研究了轧后快冷时间对控轧低碳钢板组织和力学性能的影响。
This paper intends to study the influence of rapid cooling time after rolling on the microstructure and mechanical properties of low-carbon steel.
提出了旨在降低热控系统质量的热泵-蓄冷组合热控方案。
A novel heat pump ice thermal storage integration scheme based on reducing total mass (including relative power system mass) of thermal control system of spacecraft is presented.
应用推荐