介绍袜子横向拉伸测试仪的研制过程。
This paper introduces the investigating process of the lateral stretching tester for socks.
最后采用该系统对金属铜丝和一种结构胶粘剂薄膜进行了拉伸测试。
The stress-strain curves of a copper wire and a structure adhesive film tested with the system are given.
通过拉伸测试和透射电镜分析，研究时效温度和时间对2A97铝-锂合金组织和性能的影响。
The effects of aging treatment on the microstructure and tensile properties of 2A97 Al-Li alloy, were investigated by tensile test and TEM.
通过对阻燃腈纶纱的瞬时拉伸测试，分析重复拉伸条件下腈纶纱的瞬时回弹特性，定量地阐明腈纶纱瞬时拉伸回弹率与经纱开口变形的关系及其对织造加工的影响。
The relationship between the instantaneous resilience of the yarn and the shedding deformation along with its influence on weaving performance were discussed on a quantitative basis.
这个研究组还对小鼠的肌肉做了标准化压力测试，将它们同时拉伸然后待其自然收缩。
The team also subjected mouse muscles to a standardized stress test where they are simultaneously stretched and caused to contract.
采用显微观察、拉伸和弯曲等力学测试方法，研究了竹材的微观结构和力学特性的关系。
The microstructure of bamboo was investigated and correlated with the mechanical properties of this material under tensile and flexural stresses.
介绍了一种用于MEMS薄膜材料力学特性测试的单轴拉伸试验方法。
A uniaxial tensile test method for measuring mechanical properties of MEMS thin film materials is presented.
测试和分析了这种织物的拉伸性能。
还测试了股骨、胫骨拉伸和压缩时的破坏强度。
The tension and compression ultimate strengths of femur and tibia were tested, too.
测试了复合材料的高温拉伸性能。
High temperature tensile property of the composite was tested.
该系统可测试条样拉伸、握持拉伸、撕裂、CBR顶破、圆球顶破、刺破等力学性能。
It can test the mechanical properties, such as spline tension, holding tension, tearing, CBR upend, ball upend, Pierce, thickness and so on.
用碳纤维进行了性能研究，测试了拉伸、压缩、剪切和冲击性能。
The tensile compressive shear and impact properties of carbon fibre are tested.
对采用维纶和玻璃纤维编织的增强体的拉伸等性能进行了测试与分析。
The mechanical properties is also tested and analyzed, such as tension properties of fabrics which were knitted with vinylon and glass fiber.
测定了析出相的类型和组成，测试和计算了冲击、拉伸状态下裂纹的形核能与扩展能，并通过SEM研究了断面形貌。
The crack nucleation energy and the propagation energy were measured under impact and tensile testing. The fracture surface was examined by SEM.
通过拉伸、宏观织构、FLD等实验，测试并比较了SPCD和SPCE冷轧板的成形性能。
The forming properties of SPCD and SPCE cold-rolled sheet are tested and compared through experiments such as drawing, macrostructure and FLD.
焊后试件的性能测试结果表明，焊接接头的拉伸强度、断面收缩率、延伸率及冲击韧性均已超过母材。
The results of performance measurement test show that tensile-strength, contraction of cross sectional area, elongation percentage, dynamic ductility of the weld all exceed their base metal.
将羊毛纤维在不同温度的高温蒸汽中处理不同的时间，测试其拉伸性能及在碱中溶解度的变化，并对羊毛纤维在高温蒸汽中的颜色变化进行了目测评价。
Wool is treated in superheated vapor for different time. And then we test its stretch characters and alkali solubility while take its color changes into consideration.
对修复件的显微组织进行了分析，并对修复件的拉伸、冲击性能进行了测试。
The microstructure and mechanical properties of the tensile and impact strength are tested.
结果表明，设置试验机的控制参数、拉伸速度和试样尺寸等均对力学性能测试结果有影响。
The result showed that these parameters were affected by the controlling parameters and tensile velocity of the machine and dimensions of the samples.
测试了针织泳衣面料的氨纶含量、拉伸弹性回复率及水中浮力，分析了氨纶含量与泳衣面料的弹性回复率及水中浮力之间的关系。
Tested the ammonia percentage of swimming suit fabric, its elastic recovery and buoyancy in water, and analyzed the relationship between ammonia percentage and the elastic recovery and buoyancy.
通过拉伸力学性能测试和断口形貌分析，研究了2195铝锂合金冷轧薄板的各向异性随时效时间变化的规律。
The anisotropy during aging treatment for 2195 Al-Li alloy cold-rolling sheet is studied through tensile mechanical properties and electron fractography.
利用高温拉伸、抗弯测试和显微压痕测试等研究手段，指出硅材料表面状况、位错和杂质是其机械性能的主要影响因素。
By means of tensile tests at high temperature, bending strength and indentation, it is found that the mechanical properties of silicon mainly depend on surface states, dislocations and impurities.
测试了固化后的聚氨酯胶粘剂胶片的性能，讨论了分子结构对拉伸强度和伸长率的影响。
The effect of molecular structure of polyurethane on tensile strength and percentage elongation were evaluated by measuring the mechanical properties of the cured resin films.
通过对活性碳纤维拉伸性能试验方法及试验技术参数的研究与探讨，旨在找到一种适合测试活性碳纤维拉伸性能的试验方法。
By researching and exploring tensile performance test methods and technical parameters of activated carbon fibers, it is to find a kind of test method meets activated carbon fibers.
提出了一种利用拉伸法和剪切法测定内生复合板钢板弱界面拉伸强度及剪切强度的测试方法。
A new method was given to test the cohesion strength of weak interface of DISC by tensile tests and shearing tests.
高聚物制品的冲击性能测试方法有三种，本文主要介绍了拉伸冲击性能试验。
There are three methods of testing the striking property of high polymer producer. In this paper, the testing method about extended striking property is mainly introduced.
该装置可分别进行材料的拉伸、压缩、扭转性能测试。
This apparatus can be used to measure the properties of materials subjected to tension, compression and torsion separately.
介绍了一种高强度光敏胶拉伸剪切强度测试方法，分析了影响测试结果的几种主要因素。
An introduction to the testing method for tensile and shear strength of high strength photosensitive glue is given and the main causes that have influence on the testing result is analyzed.
分析了电子引伸计应变测量误差形成的主要原因，以及对金属材料拉伸试验强度测试的影响，介绍了引伸计使用中的一些经验和注意事项。
The main cause of error of strain measurement using electronic extensometer and its effects on the strength measurement in tensile tests of metallic materials was analyzed.
分析了电子引伸计应变测量误差形成的主要原因，以及对金属材料拉伸试验强度测试的影响，介绍了引伸计使用中的一些经验和注意事项。
The main cause of error of strain measurement using electronic extensometer and its effects on the strength measurement in tensile tests of metallic materials was analyzed.
应用推荐