你的腿可能在你睡着的时候不受你控制的抖动。
Your legs may also move without your control while you sleep.
抖动，说明极有可能是消磁电阻损坏，如果没有响声则可能继电器及其控制电路有问题。
Jitter, that is very likely damage degaussed resistance, in the absence of sound may be the relay and control circuit problem.
利用抖动算法和帧频控制，这种彩色显示模式可产生4096 种颜色。
The color display mode can generate 4096 levels of color using the dithering algorithm and FRC.
该仪器是基于脉冲前沿抖动的MIL标准定义，采用了单片机技术进行控制和数据处理。
The measurment was based on the definition of MIL standard, The measurment control and data processing were realized by the single chip.
计算机仿真结果表明，采用模糊变结构附加励磁控制方法可以提高鲁棒性、解决高频抖动问题，并能够很好地改善电力系统的小干扰稳定性。
Computer simulation shows that the control of fuzzy variable structure can increase the robustness, solve the problem of shiver at high frequency, and improve the stability of small disturbance.
每一个可以控制的抖动使用图形平板如适当的硬件设备。
Every Jitter can be controlled using a proper hardware device like a Graphic Tablet.
提出一种反馈调度的方法在线调节控制任务的截止时限，从而减少输出抖动。
A feedback scheduling approach was presented to adjust control tasks deadlines online thus to reduce output jitter.
按钮式控制数字电位器x 9511由延时去抖动电路、单稳电路、触发器组成。
Button control digital potentiometer X9511 is consists of time delay circuit removed dithering, mono - stability circuit, preventative dithering trigger.
在基于固定优先级调度实时控制系统中，任务的延迟与抖动是影响系统稳定性的重要因素。
In real-time control systems based on fixed priority scheduling, the latency and jitter of task are important factors which will impact the stability of the system.
针对常规滑模变结构控制方法在电磁轴承控制当中引起的抖动问题，将边界层法用于滑模变结构控制器的设计。
This strategy combines the fuzzy logics with the method of sliding mode control, thus can reduce the chattering without decreasing the robustness of system.
仿真结果表明该控制器具有较好的动态性能及鲁棒性，并有效减少了抖动。
The simulation results show the high performance dynamic characteristics and robustness of the proposed controller, as well as the efficiently reduced chattering phenomenon.
但目前在拥塞控制方面的研究对于网络节点的缓冲占有量的抖动性即系统稳定性考虑不多。
But till now, the stability of system, especially the oscillations of buffer occupancy have not been the focus of research in congestion control.
仿真结果表明，所设计的滑模变控制器使助力电机具有很好的动态性能，系统基本无抖动现象，实现了助力电机输出电流对目标电流的跟踪特性。
The simulation results show this control system has good dynamic property and negligible vibration, and efficiently makes the output current of direct motor trace the intent current.
这使得它更容易稳定相机正常，并应有助于控制相机的抖动，特别是如果您经常使用或更长的变焦长焦镜头。
This makes it easier to steady the camera properly, and should help to control camera shake, especially if you frequently use the telephoto zoom lens or longer.
因为采用6轴数控系统的框架，使得我们的中走丝专用控制系统在做复杂加工时依然保持高速、均速、决不抖动。
Because the use of 6-axis CNC system framework, allows us to take the wire in the dedicated control system to do complex processing remains a high-speed, all-speed, not jitter.
介绍了一种由微机控制的对DL、DY-20c系列电流、电压电磁继电器动作时间及抖动时间自动检测的方法。
This paper introduced the method of the automatic measurement of DL (DY) - 20c series current (voltage) electromagnetic relay movement time and vibration time controlled by computer.
由于减少了路由抖动，平稳重启能够增加网络稳定性并减少控制平面资源的消耗。
By also reducing routing flap, Graceful Restart stabilizes the network and reduces the consumption of control plane resources.
该系统采用了片同步技术实现了采样后高速数字信号的可靠锁存，采用高精度的时钟管理芯片和设计合理的时钟路径对时钟抖动做了严格控制。
The Chip-Sync technology has been used to ensure the latch of high-speed signal, and we use high accuracy clock management chips and design reasonable clock way to strict control the clock jitter.
对制动抖动现象、机理、影响因素、研究方法以及控制措施进行较全面的研究。
A comprehensive study on brake judder, including phenomena, mechanism, influence factors, research methods and control measures was done in this paper.
这种控制方式既保留了传统非线性变结构控制的优点，又简化了设计，解决了高频抖动的问题。
This control system retains the positive properties of conventional sliding mode control, which simplifies the process of design and solves the problem of high frequency shaking.
利用一非线性微分控制减弱了参数自动调整阶段引起的系统抖动。
A nonlinear derivative control is introduced to avoid system chattering caused by parameters tuning.
由于网络状态的变化给传输带来延迟抖动，因此接收方要如实地播放，就必须进行同步控制，以恢复数据之间的时间关系。
Varieties of net conditions bring transmission delay jitter. The receiver must take synchronization control to resume time relation of stream before playing them according to the facts.
针对常规滑模变结构控制方法在电磁轴承控制当中引起的抖动问题，将边界层法用于滑模变结构控制器的设计。
To solve the chattering problem caused by general Sliding Mode control in active magnetic bearings control, a Boundary Layer Approach was used in the controller design.
针对单输入单输出和多输入多输出网络控制系统中存在的时延抖动和时延偏移问题，提出了在控制器和执行器前设置缓冲区的方法。
For the problems of delay jitter and delay skew consisting in SISO and MIMO networked control systems, the method of setting buffers before controller and action is bring forward.
在分析研究延时抖动、平均速率和丢包率等网络参数的基础上，给出客户端接收缓冲区长度估算公式。根据客户端反馈网络参数在服务器端实现流量控制。
A formula for calculating receiving buffer length was proposed, based on the analysis and research on network parameters, such as jitter, average speed and packet loss fraction.
模糊变结构滑模控制提供了跟踪的快速性和稳定性，PI控制则消除稳态抖动，提高了稳态精度。
The fuzzy variable structure sliding model control provides rapidity and stability for tracking, while PI control eliminates steady-state vibration and improves steady-state accuracy.
这种控制方式既保留了传统的滑动模态控制的优点，又解决了高频抖动的问题，同时也提高了控制的鲁棒性。
This control method retains the positive properties of conventional sliding modecontrol. and solves the problem of high frequency shiver. as well as increases the robustness of the controller.
对象和逆控制器各用一个抽头延迟线滤波器表示，用抖动方法给对象建模；
Plant and inverse controller are expressed by a tapped delay line filter respectively.
对象和逆控制器各用一个抽头延迟线滤波器表示，用抖动方法给对象建模；
Plant and inverse controller are expressed by a tapped delay line filter respectively.
应用推荐