根据工件的复杂程度，ROFIN为2d或3d的扫描焊接提供了对应的激光解决方案。
Depending on the complexity of the workpiece, ROFIN offers laser solutions for 2d or 3d scanner welding.
采用T扫描方法可以得到扩散焊接界面的紧贴型缺陷分布。
The distribution of the kiss defects on diffusion welded interfaces could be obtained by T-scan imaging.
断口扫描电镜观察显示断口有一定的塑性，未发现气孔和焊接缺陷。
SEM showed no pores and other defects and some ductility at laser welding area.
利用x射线衍射分析和扫描电镜，研究了金刚石锯片激光焊接接头的成分和组织，并测试了接头的力学性能。
The composition and microstructure of the diamond saw blade joint welded by laser welding were studied using X ray diffraction and SEM, and the mechanical properties of welded joint were measured.
采用扫描电镜、电子背散射衍射和透射电镜研究了焊接界面的组织结构。
The welded interface microstructure was investigated via scanning electron microscope (SEM), electron backscatter diffraction (EBSD) and transmission electron microscope (TEM).
利用X射线底片扫描成像法得到铝合金焊缝图像，再通过图像处理方法即可得到焊接缺陷二值图象。
Processing the aluminum weld image from the scanning of the X ray negative can derive the binary image of the weld defects.
用光学显微镜、透射电镜、扫描电镜、能谱分析、显微硬度等分析手段，对ZA合金TIG焊接熔合区的显微组织及其形态、显微硬度及成分等进行了研究。
The character of microstructure and micro rigidity of bond area of the ZA alloy in the TIG welding was investigated using TME, SME and other methods.
用扫描电子显微镜和能谱仪对钨和铜以及不锈钢的热等静压焊接试样的焊接界面进行了分析研究。
The SEM and EDS were used in this paper to analysis the welding interface of the specimens of tungsten and copper, copper and stainless steel made by HIP welding.
利用声学扫描检测技术，提示了热烧毁的微波功率器件氧化铍陶瓷基片与底座金属散热片的焊接不良现象；
Burn-out of a microwave power device due to the poor bonding between beryllium oxide and base metal sink was investigated using Sound Scanning technique.
用扫描电镜和能谱分析仪对钎焊接头的显微组织进行了分析。
The microstructure of the brazed joint was analyzed by means of a scanning electron microscope and an energy spectrum analyzer.
采用焊接热模拟、电化学测试、扫描电镜、X射线衍射等方法研究了热循环对喷瓷管道瓷层耐蚀性的影响。
The influence of thermal cycles on the enamel coating corrosion resistance was investigated by Weld Thermal Simulation, Electro chemical Technique, SEM and XRD.
利用扫描电子显微镜和能谱分析(EDS)对焊缝断口进行成分分析，研究焊接接头的焊接缺陷及断裂机制。
Weld fracture components were analysed by SEM and EDS, joint defect and fracture mechanism were also researched.
为消除LY 12 CZ铝合金激光焊接时焊缝中常见的气孔和裂纹缺陷，通过正交实验，优化了激光功率、扫描速度、保护气体流量等工艺参数，并采取适当的焊前预处理工艺。
Through orthogonal experiment, laser power, scanning rate and gas flow were optimized and pretreatment techniques were adopted to cancel pore and crack in laser weld of LY12CZ.
采用T扫描方法可以得到扩散焊接界面的紧贴型缺陷分布。
The distribution of the kiss defects on diffusion welded interfaces could be obtained by T-scan imagi...
通过硬度试验、冲击试验、断口扫描和金相组织观察，研究了T92钢焊接接头的韧性与组织的关系。
Through hardness test, impacting test, SEM of failure surface and microstructure observation, the relationship between the toughness and its microstructure of welding joint of T92 steel was studied.
通过硬度试验、冲击试验、断口扫描和金相组织观察，研究了T92钢焊接接头的韧性与组织的关系。
Through hardness test, impacting test, SEM of failure surface and microstructure observation, the relationship between the toughness and its microstructure of welding joint of T92 steel was studied.
应用推荐