这些判断是从汇集的横截面分析,因此他们所描述的数据关联。
These judgments are from pooled cross-section analysis, so they describe associations in the data.
断面几何特征具有各向异性,单一方向的二维截面分析难以全面描述复杂的断裂表面。
The geometric topography of fracture surface was found to be anisotropic, and it will be not adequate to describe the complex fracture surface with only one single cross section.
用弹塑性截面分析法、非线性有限元法计算了梁的承载力与挠度,理论计算值与试验值吻合良好。
A nonlinear finite element method analysis is conducted that corroborates the results from the experimental study and inelastic section analysis.
截面分析结果显示,表面几十微米范围内,第二相减少,且随电子束轰击次数的增加,热影响区范围增大。
Result of cross section analysis showed that the second phase reduced within a range of several tens microns, and the depth of heat affected zone (HAZ) increased with the increment of pulses.
同时本文将对晚清四大小说期刊中的翻译小说做截面分析,将晚清文士、学者所做的追逐现代的努力发掘出来。
Besides, the paper does a synchrone analysis for these translated novels, explores the modernity that imagined and chased by literates and scholars in Late Qing.
并以某发动机油底壳为例,把截面分析结果与三维分析结果、实验结果进行对比,验证了截面分析技术的可行性和高效性。
With an oil pan used in car as an example, the result of section analysis is compared with the results of 3D analysis and experiment. The feasibility and efficiency of the section…
进一步,进行横截面分析,分别按照规模、换手率、股票价格、市净率进行分析,发现大盘股、低换手率股票和高价格股票具有较大的动量净利润。
Further more, in the cross-section; I get the conclusion that the stocks with big size, stocks with low turnover and stocks with high price can earn large abnormal momentum profit.
通过分析和计算锕系核裂变截面和全套中子反应截面获取了一组锕系核的裂变位垒参数。
The fission barrier parameters for actinide nuclei were obtained by analysis and calculations of fission cross-sections and complete neutron reaction cross sections.
通过考虑接触与不考虑接触两种情况时桥面板跨中截面的受力分析,验证该问题中接触有限元模型的正确性。
By analysis of the middle section stress of the hollow slab in the two situations of consider contact and not consider contact, verified the accuracy of contact finite element model in that situation.
本文对格构式变截面吊臂金属结构的临界力计算作了理论分析。
This paper theoretically analyzes the critical force in metal hoisting boom structure of lattice type and variable section.
对自动调整臂的设计计算作了详尽的分析,主要以下几个方面:1矩形截面力和弹簧的设计计算。
There are mostly a few aspects that fully analyse for design and compute for AIRA:1 design and compute for spring of rectangle section .
在分析大量文献资料的基础上,采用“等效截面”将双向受弯构件转化为单向受弯构件。
Based on the academic analysis, a biaxial bending member is equivalent to a single bending member by the rule of equivalent cross section.
介绍对梁体进行的检测、荷载试验,以及对桥梁上部结构及开裂截面的实际受力状况的分析。
In this paper, the inspection, load tests for the beams and analysis of actual mechanical behavior of the superstructure and cracked sections thereof are presented.
详细讨论了基于有限元分析的钢筋混凝土和预应力混凝土楼板的板带截面设计方法。
The section design method of slab strips for reinforced concrete and post tensioned concrete slabs is discussed in detail.
在反应堆物理设计和分析时,经常要进行微扰计算,以快速分析堆芯中子截面扰动下反应性的变化量。
Perturbation calculation will be required to rapidly determine the changes of reactivity caused by core neutron cross sections perturbation in reactor physics design and analysis.
本文使用一个独特的由多年很截面数据组成的数据库对收入不平等在这期间的增长进行分析。
Using a unique set of repeated cross-sectional data this paper examines the causes of this increase in earnings inequality.
摘要分析了透明圆形截面纤维在垂直纤维轴光线照射时纱维内表面反射光的一种特殊现象—笛卡尔线现象。
An analysis is made about Descartes rays of transparent round-section fibers-a special internal surface reflection rays of the fiber when parallel rays strike the fibers perpendicularly to fiber axis.
本文通过大型试验的研究,分析梁板结构截面的剪力滞效应,及翼缘板的有效分布宽度,为设计提供参考。
In the paper, spear lag of beam plated construction and effective distribution width of flange plate are analysed through model test and research. It provides a reference in design.
利用该模型对冲压件截面形状进行了分析,确定了截面转角的公共可行域,并建立了一组目标函数作为优化对象。
With the model, the cross sectional shape of a pressing is analyzed, and the public feasible zone of sectional angle is determined, and a group of target functions are created as optimization objects.
通过一工程实例中悬挑梁的正截面配筋计算,对钢筋混凝土悬挑梁正截面超筋的概念进行了分析和探讨。
Through a calculation of the strength of normal section of extra-reinforced cantilever beam for an actual project, the conception of normal section of extra-reinforced cantilever beam is analyzed.
通过对四种二次曲线截面的柔性铰链的理论计算和有限元分析,比较分析了它们的力学特性。
Theory calculate and finite element method to symmetric conic-section flexure hinges is used to compare and analyze their dynamics characteristic.
最后分别分析了材料性质、截面长宽比、管长和壁厚对最终变形模式的影响。
Moreover, the influences of material property, section properties, tube length and thickness to ultimate deformation modes are studied respectively.
在以往的钢筋混凝土梁截面非线性分析中,对于剪跨比较大时通常的做法是不考虑剪力的影响,这种简化方法所带来的误差不大。
The effect of shear on the nonlinear sectional analysis is often ignored when the shear span ratio is large, it is believed to be appropriate as it brings little error.
该法可以对在弯矩、剪力和轴力共同作用下的钢筋混凝土梁截面进行较为准确的荷载-变形反应全过程分析。
This method can be used to analyze accurately the complete load-deformation response of RC beams loaded in combined shear, moment, and axial load.
该模型分析了冲压件截面形状,确定所有截面转角的公共可行域,并建立一组目标函数作为优化对象。
The panel cross section is analyzed in the model, and the feasible zone of all cross section rotating angle is located, and a group of target function is proposed as optimized object.
采用有限元方法,建立适于冷弯截面受弯构件性能分析的非线性有限元分析模型。
It is also presented a finite element analytical model suitable for non-linear analysis of HFB flexural members.
首先对常见的工艺补充面截面线类型进行分析,建立数学解析模型并进行参数化设计,并且给出特殊问题的处理方法。
At first, the section curves of addendum is analysed, mathematic analytic models are established, the parametric design is finished and method to deal with especial questions is presented.
首先对常见的工艺补充面截面线类型进行分析,建立数学解析模型并进行参数化设计,并且给出特殊问题的处理方法。
At first, the section curves of addendum is analysed, mathematic analytic models are established, the parametric design is finished and method to deal with especial questions is presented.
应用推荐