为在实际触变塑性成形工艺分析中的进一步应用奠定了理论基础。
It is theoretical basement to apply further for practice thixotropic plastic forming technology analysis.
针对压盖具有的阶梯型结构，进行了拉深、成形工艺分析及计算。
Drawing and forming process analysis and calculation was carried out in terms of step configuration of the press-cover part.
通过对工件的成形工艺分析，介绍一种构思新颖巧妙，结构简洁实用的浮动滑块复合成形模具设计。
Through analyzing the forming process of the parts, a new_conception and practical compound forming die with simple structure for floating slides was introduced.
对彩管荫罩零件进行张拉成形工艺分析，介绍了模具结构及主要零件设计，并运用曲面方程进行凸模曲面形状设计。
By bulging forming technology analysis of color kinescope shaded cover, die structure and main parts designs are introduced. Punch surface shape is also designed by surface equations.
对彩管荫罩零件进行张拉成形工艺分析，介绍了模具结构及主要零件设计，并运用曲面方程进行凸模曲面形状设计。
By bulging forming technology analysis of color kinescope shaded cover, die structure and main parts designs are introduced.
通过对投递箱箱盖的成形工艺分析 ，介绍了其弯形压边模结构及工作过程 ，阐述了在有花纹及字母的成形模设计中应注意的事项。
Through the analysis of the technological process for the delivery box lid, the structure working process of the flanging and pattern_pressing die were introduced.
通过挤压成形的应力分析，确定了连续挤压工艺及其挤压模结构，在实际应用中取得了令人满意的效果。
Continuous extrusion technology and its die structure have been determined via stress analysis in extrusion forming and characteristics of material itself, with satisfactory effect in practical use.
通过分析铜排结构及成形工艺，设计出了合理、高效的扭弯模具。
Through analyzing copper bus-bar structure and forming process, designed a reasonable and highly effective bending die.
对车架冲压件的成形工艺进行了分析，并详细介绍了模具结构及其设计过程。
The forming process of pressing for farm transporter frame is analysed, the die structure and its design process are introduced in detail.
分析了淋盘成形工艺，设计了合理的模具结构。
This article analyzes the forming technology of the spray tray, and design rational mould structure.
介绍了汽车后制动底板冷压成形工艺的应力分析及工艺参数的确定。
This paper presents a stress analysis and selection of processing parameter in cold-pressing forming process for manufacturing the automotive rear brake back plates.
本文在研究国内外花键生产的基础上，对内外空心花键管的成形进行了工艺性分析，提出了花键管的冷挤压工艺。
Based on the analysis to the current spline forming process at home and abroad, the spline tube forming process was studied and the cold extrusion process was suggested.
研究结果对于定向凝固涡轮叶片设计、分析方法的完善和成形工艺的改进具有重要意义。
The research results may also help to improve the fabrication processes of directional turbine blade solidification.
本文分析了微型气缸的形体特征和成形工艺特点。
The article analyses shape feature and forming technology characteristic of miniature cylinder.
对该零件成形工艺进行了优化，研究了不同的压边力、最小模具圆角半径对冲压成形的影响，通过对模拟结果的分析得出了空调前板的最优化成形方案。
The optimization of drawing technique was researched, and the influence of different blank holder force and minimum die fillet radius on stamping forming was studied as well.
研究分析了聚苯硫醚的成形工艺。
This article researches and analyzes its manufacture process of PPS.
该零件产量较大，对尺寸的一致性要求高，通过对该夹簧零件结构和成形工艺的分析，确定该零件成形过程。
The output of the part was large so that the requirement for identical dimension was high. Through analysis of clamp structure, forming process was determined.
半固态加工是金属材料成形领域中的一种新工艺。本文分析了铝合金半固态成形技术的现状及发展趋向。
Semi-solid forming is one of new types of material processing. This paper analyses the present and the future of this new forming technology.
在分析卷绕成形加工方法工艺过程的基础上探讨影响卷绕成形零件精度的各种因素。
Based on introducing the principle of rolling shaping process this paper analyzes the factors that affect the precision of part.
分析了叉车平衡重后盖的成形工艺，介绍了模具结构及主要工作部分的设计。
The forming technology of balance weight cover of fork truck is analyzed. Die structure and working part design is also introduced.
基于对某型号汽车离合器盖的结构工艺性分析，提出了一套合理有效的成形工艺。
Based on structural processing analysis of one kind of automobile clutch shell, a reasonable and effective shaping process was proposed.
针对不锈钢螺旋板的左旋螺旋面结构特点，分析了成形工艺，并介绍了成形模具结构。
According the laevorotatory helicoid structure characteristic of the stainless steel spiral plate, analyzed the forming process, and introduced forming die structure.
对三角形底盘筒形件的成形工艺进行了分析，决定采用弯曲、拉深、胀形复合模等进行复合成形。
As the shape technology of triangle chassis canister is analyzed, then the processes of bending, stretching and bulging compound mould are adopted to reunite the shape.
通过对左座椅调整器的成形性工艺分析，提出了采用两套复合模结构的方法，并介绍了模具的具体结构及模具工作过程。
Through the analysis of forming technology of regulator of left chair, the method of using two sets of compound die is put forward.
针对汽车半轴摆辗成形进行了工艺分析，提出了一种新的工艺方案。
The forming of automobile′s half shaft by rotary forging technology has been analyzed and a new technological project put forward.
针对带孔深锥形管件的成形特点进行了工艺分析，确定了成形方案，设计了锥形管挤压模和冲孔模。
The extrusion and piercing die was developed based on the technical analysis on the shaping characteristics of deep taper pipe with hole.
介绍了彩色三维打印（3DP）成形技术的工作原理及其成形工艺，分析了彩色三维打印的原型件的物理性能。
The operation principle and working process of color Three Dimensional Printing(3DP) technology are introduced, and physics performances of the color 3D Printing prototype are analyzed.
介绍了彩色三维打印（3DP）成形技术的工作原理及其成形工艺，分析了彩色三维打印的原型件的物理性能。
The operation principle and working process of color Three Dimensional Printing(3DP) technology are introduced, and physics performances of the color 3D Printing prototype are analyzed.
应用推荐