根据摩托车档位齿轮的产品特点，进行成型工艺分析优化，获得合理的产品精化毛坯，拔模斜度等参数，获取产品的预成型毛坯尺寸。
The rational rough and technological parameter of profile modified gear is gained by analysis and optimizing of forming, and the preliminary shaping size of product is defined.
论述了改性聚乙烯泡沫塑料的配合技术、成型工艺及常见质量问题的分析。
The correlated technology of PE-foams, the forming process and the analysis of usual QCproblems were dealt with.
通过对九线基座、接线柱定位夹具注射模镶件的工艺分析，确定了成型镶件分半镶拼式结构。
An injection mould with half-parting inlaying structure was developed based on the analysis on forming process of wiring terminal positioning fixture with nine-thread pedestal.
在对典型事例作具体分析的前提下，介绍了人工神经网络在钢铁成型工艺中的一些应用。
On the premise of making a concrete analysis of a few typical examples, application of artificial nerve network in metallurgical forming are described.
分析了主要工艺参数如：激光功率、扫描速度、送粉量以及Z轴增量对成型质量和形貌的影响。
The technics parameters, such as the laser power, scan velocity, powder feed rate and the Z axis increment, which influence quality and shape were analyzed in this article.
分析了TPU(热塑性聚氨脂材料)的成型工艺，并详细介绍了TPU注射模的设计和制造方法。
The forming process of TPU was discussed and both the mould design and manufacturing method were introduced in this article.
分析注塑件产生缩痕的原因，并从成型工艺角度出发提出解决缩痕的对策。
This article analyzes the reason of the sink-mark on injection molding product, and raise the solution about this question from view point of molding technology.
基于模流分析技术优化了模具的成型工艺参数、浇注系统及冷却系统。
Secondly help mold flow analysis techniques to optimize the process parameters of mold forming, casting systems and cooling systems.
分析了小型管坯一次穿孔成型工艺的可行性、产品质量和生产效益。
The possibility of one pass process and its product quality and economy for small billets are analysed.
通过对饮水杯盖产品结构和注射成型的工艺分析，确定了该塑件的注射模结构为一模两腔。
Through study on the structure of children potable water cup and existed technology problems in injection forming, an injection mould with one module and two cavities were determined.
分析了笔尖和笔杆的结构特点与成型工艺，介绍了该类零件的注射模结构特点。
Analyzed the structure characteristics of the tip and penholder and molding technology, introduced the injection mold structure characteristics.
分析了保险杠的结构及性能要求，并研究了保险杠的气辅注射成型技术及工艺过程。
The structure and capability requirement of auto-bumper were analyzed, and the gas assisted injection molding (GAIM) technology and its process were studied.
分析了塑件的成型工艺及模具注射成型对塑件质量的影响，介绍了浇注系统的设计，模具分型结构、模温控制的设计。
Analyzed the influence of the plastic part injection molding process to part quality, introduced design of injection mold, mold parting structure design and mold temperature control design.
分析和指明了PC制品在注塑成型生产中各个方面降低制品内应力的工艺方法、特点及要求。
This paper analyses the process, characteristics and requirement of the lowering of the internal stress of the PC products in the moulding.
应用该系统进行了堆焊试验，对试验结果进行分析得出了焊接工艺参数与成型焊缝熔宽、余高之间的关系。
Using this system and the analysis of the results, the relationship of weld parameters between weld width and weld height was gotten.
通过用注塑模CAE软件MOLDFLOW对塑件进行模流分析，选择聚丙烯的成型工艺参数，设计了一模一腔的注射模具。
An injection die with a mold cavity was designed though using the injection mold CAE software MOLDFLOW to simulate plastic flow and choosing the molding parameters of polypropylene.
并分析PS流变现象，提出确定PS日光灯罩挤出成型工艺条件的基本方法。
Moreover, PS theological phenomenon is analyzed and the basic method for determining the extrusion moulding conditions of PS fluorescent lamp-shade is developed.
分析了洗发液瓶盖塑料件的成型工艺。
The processability of the plastic bottle cap for shampoo was analyzed.
文章以电话机面板外壳的成型工艺为研究对象，利用CAE技术对产品的注塑成型过程进行了模拟和分析。
Based on the study of molding process of telephone panel, the process of injection molding of products was simulated and analyzed by CAE technique.
通过对流变性能的分析，采用注射成型工艺，制出样条对其力学性能进行分析。
Through the rheological behavior of the analysis, using injection molding technology system to its mechanical properties of the sample for analysis.
研究了苎麻纤维增强醋酸纤维素基复合材料的成型工艺和性能，分析确定了主要影响因素和适宜的成型工艺。
This paper studies ramie fiber reinforcement cellulose acetate composites. The forming process and mechanical behavior of composites under different conditions have been analyzed.
根据该零件的结构特点，分析了零件的注射成型工艺。
According to the structural characters of this part, the injection moulding technology of parts is analyzed.
分析了镜座的成型工艺，设计了该塑件的注射模，并介绍了该模具的工作过程和模具的设计与制造要点。
Moulding technology of specular seat is analyzed and the injection mold of this plastic part gets designed furthermore working process and key points of die design and manufacture are provided.
本文介绍了国内目前使用的现场缠绕大直径玻璃铜容器的三种方法，重点分析了其设备构成及成型工艺特点。
Three methods to wind large diameter FRP tank on the site at home are introduced in this paper. Their equipments and processing are analysised.
分析了饭盒盖的塑件工艺特点，介绍了饭盒盖注射成型模设计要点及模具的工作过程。
The injection technological characteristics of lunch-box cover are analyzed, and the design main points and working process are also introduced.
主要论述了塑料油箱盖的注塑成型工艺，并就如何例用CAE分析论证产品的工艺性、以及如何保证产品的不变形进行了说明。
Mainly discuss the Plastic Tank Flap injection process. and how to use CAE in analysis product manufacture. And how to ensure production not deformation.
分析比较了预绞丝螺旋线的特点和成型工艺，介绍了绞丝模具结构和型腔加工工艺。
The processes of corresponded moulds are introduced in order to analyze and compare the characteristic and the production process of mould of performed helix.
分析了带弯芯塑料三通管的注射成型工艺，并对成型过程出现的缺陷进行预测。
The molding technology of three-way plastic tube with flexural core is analyzed and the molding faults in plastic injecting process are forecasted.
依据辊弯成型原理，对辊弯成型过程进行工艺分析，进而寻求工艺优化方法，为生产实际提供技术支持。
Based on rolling forming principle, analyzes the rolling forming processing and seeks out processing optimum method in this paper, which provides the technical support for production.
系统地阐述和分析了粉末增塑挤压技术和金属注射成型技术中的应用、原料、工艺原理等，并对两种技术的异同进行了分析比较。
The application, raw material, technological principle and other items of both powder extrusion molding and metal injection molding technology are analyzed and compared.
应用推荐