该方法可用于电压表试验中应力-应变关系的确定。
It could be used to determine stress-strain relation in oedometer test.
但却明显地表现出非线性的应力-应变关系。
However, the relation between the stress and the strain is nonlinear.
基本的应力-应变关系是用承受轴向载荷的构件确定的。
The basic stress-strain relations are defined with respect to an axially loaded member.
同时晶须取向也影响复合材料的热压缩应力-应变曲线的形状。
Meanwhile, the whisker orientation affects the shapes of the stress strain curves of the composites.
混凝土约束改变了有效应力-应变关系:造成强度和临界应变的增加。
Confinement of concrete results in a modification of the effective stress-strain relationship: higher strength and higher critical strains are achieved.
根据岩石蠕变的应力-应变比曲线可以近一步分析得到等时模量曲线。
We can gain the isochronous - modulus curves from the curves of stress - strain ratios.
观测对象包括:体应变,分量应变,分量应力和钻孔应力-应变差应变。
Observational objects include: cubic strain, component strain, component stress and differential strain of borehole stress strain.
图78中应力-应变数据的一个重要情况是在双对数座标上图线的直线性。
An important aspect of the stressstrain data in Fig. 78 is the linearity of the log-log plots.
该文利用分形几何的方法对挤压膨化大米的应力-应变曲线进行了定量分析。
In this paper, fractal geometry isu sed to quantitatively analyze the stress-strain curves of extruded rice.
本文以纳米压痕法结合量纲分析及有限元方法来测量薄膜材料的应力-应变关系。
In this master thesis, the stress-strain relationships of thin films were measured by nanoindentation combined with dimensional analysis and finite element method.
不是所有的材料都会产生应力-应变图,即当载荷增加时显现出开始屈服的迹象。
Not all materials produce stress-strain diagrams on which there is a clear indication of the start of yielding as the load is increased.
将该式引入结构性黄土应力应变特性分析,提出了考虑结构性参数的应力-应变关系。
Further the structural parameter is applied to analyze stress-strain behaviors; and a structural stress-strain relation is set up.
在分析中,考虑土的非线性应力-应变关系、土钉与土体的相互作用,以及分步施工过程。
In this finite model, the nonlinear stress - strain relationship of soil, the soil - nail interaction and the staged construction are all taken into consideration.
通过室内试验,对水泥改良土的物理性质、应力-应变关系、强度特性、压缩特性进行了研究。
Based on indoor tests, the physical properties, stress-strain relationship, intensity behaviors and compressibility of the modified soil with cement are studied in the paper.
实验结果表明,对于无明显峰值应变的应力-应变曲线,采用加工硬化率方法确定峰值应变和稳态应变是一种有效的方法。
Test results show that for the stress-strain curves with no obvious peak strain, it is a available to use work hardening rate method to determine peak strain and stable strain.
弹性体是聚合物的一个种类,它的应力-应变曲线表明其变形是完全弹性的,即很低的应力变化就会产生很大的可回复应变。
Elastomer is a class of polymers whose deformation displayed by strain-stress curve is totally elastic i. e. large recoverable strains produced at low stress levels.
工程师们计算桥梁的应变和应力。
从应力—应变关系的相似特性出发,找出了小比尺离心模型与原型的相关关系。
The nonlinear similitudes between small models and prototypes are set up according to the similarities of stress-strain relations.
土坡稳定问题的塑性极限分析法与惯用的极限平衡分析法不同的是它考虑了土的应力——应变关系,属土坡稳定分析的新技术。
The plasticity analyses for stability problems is differentiated from the conventional limit equilibrium method by the former in consideration of the soil's stress-strain relationship.
在工程结构中使用的大部分材料最初的应力应变图是直线型的。
The initial portion of the stress-strain diagram for most materials used in engineering structures is a straight line.
利用土体的塑性流动理论,提出了用于描述饱和砂土在单调荷载作用下的应力—应变反应性质的弹塑性本构模型。
Based on the plastic flow theory of soils, an elastoplastic constitutive model for describing the stress-strain behavior of the saturated sands under the action of monotonic loading is developed.
万能拉力试验机可剖析整个测验的成果,例如伸长量、应力、应变、损坏值、平均值等。
Universal tensile testing machine can analyze the test results, such as elongation, average value, the stress, strain and damage, etc.
采用塑性增量理论,建立了波纹管液压胀形的应力、应变数值计算方法,解决了波纹管液压胀形工艺的理论计算问题。
By plasticity increment theory, the stress strain numerical calculate methods of bellows bulge forming, solvers theory calculating problems of bellows bulge forming technology are put forward.
本研究对各种工况下主轴的应力应变场进行数值模拟分析,并对主轴应力集中区域的力学性能进行了分析和研究,为进一步的疲劳分析提供了依据。
The stress-strain field of winder axle in various working conditions is analyzed and mechanics performance of stress concentration region is studied, which provides reference for its fatigue analysis.
通过对其拉延成型过程中,金属的应力应变的分析,提出了防皱措施。
Measures for avoiding wrinkle has been considered after analysing the stress and strain of metal during drawing process.
利用有关文献试验得到的受拉区纵筋应力应变关系、布置方式等,推导出建议的设计取值公式。
According to the stress-strain relation and disposal mode of steel in the tensional region of section from the experimental results of other papers, the design formula is concluded.
只有小裂纹扩展到足够长并钝化到足够宽,才能够影响主裂纹的扩展及其前端应力、应变的分布。
Only if this short crack extends long enough and blunted wide enough, can it affect the principal crack extension and the distribution of stress and plastic strain.
表明应力应变异常形态的时间特征与地震的孕育和发生有较明显的关系。
The results show that the anomalies' shape character of stress and strain has obvious relation with the development and occurring of earthquakes.
建立了负重轮的三种三维有限元力学模型,在考虑三重非线性的情况下,用ANSYS有限元分析软件计算了负重轮的应力应变分布。
Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.
建立了负重轮的三种三维有限元力学模型,在考虑三重非线性的情况下,用ANSYS有限元分析软件计算了负重轮的应力应变分布。
Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.
应用推荐