与波节有关的万用串列总线硬件只是文件。
第二章阐述网络式仪器总线硬件平台的设计。
In chapter two, describes hardware system design of the network-stye instrument bus.
设计开发了消费总线硬件平台、软件协议栈、支撑软件、关键设备及演示系统等。
A platform for the development home networks is constructed with hardware platform, protocol stack, supporting softwares, the key equipments and a demonstration system.
此特性允许在所需组件初始化后由内核控制图形硬件(比如pci总线和显卡)。
This feature allows the kernel to control the graphics hardware after the required components are initialized (such as the PCI bus and graphics card).
本文介绍了一种基于CAN总线的坦克射击基础练习训练系统，并对系统的总体设计、硬件配置和软件功能进行了具体分析。
This paper presents a kind of training system of tank fire basic exercises based on CAN bus. The overall design, hardware configuration and software functions are discussed in details.
加密卡是基于计算机总线接口的、提供密码服务功能的硬件模块。
Cipher Card is a hardware module based on bus interface of computer and offering cryptogram service function.
介绍一种基于USB总线技术的信号调理平台的硬件设计方案。
This paper mainly introduces a hardware design of signal conditioning platform based on USB bus technology.
介绍了一种基于PC机的IS A总线步进电机控制卡，实现多轴联动控制，讨论了其工作原理和硬件结构设计、软件设计。
One kind of stepping motor control card based on ISA bus of PC which achieved multi-spindle linkage control is introduced, its principle and design of hardware construction and software are discussed.
并对PCI总线在氡室检测系统中的具体硬件系统结构、控制芯片与驱动软件设计，与PCI总线对核谱转换的传输性能作了阐述。
And the specific hardware system structure, control slug and the design of drive software and the transmission performance of PCI bus for nuclear spectrometry were also set forth.
本论文包括硬件设计、驱动程序开发和组成CAN总线控制系统三部分。
The dissertation consists of hardware design, driver development, CAN bus control system composing.
论述了基于SJA1000的CAN总线的硬件接口电路的设计、芯片的选择、软件设计及CAN通信的实现。
The design of CAN bus hardware interface circuit based on SJA1000, the selection of chips, the design of software and the realization of CAN communication are expatiated.
论述了基于PROFIBUS-DP现场总线的浮法玻璃生产线的PLC双冗余控制系统结构、硬件组态以及软件实现情况。
The PLC double redundant control sys- tem structure , hardware configuration and software running status were described on the basis of PROFIBUS-DP field bus on float glass line .
阐述该系统软、硬件的设计方案和设计重点；讲解CAN总线控制器SJA1000的应用。
It expounds the software and hardware designing schemes and main points as well as explains the application of the CAN bus controller-SJA1000.
对CAN总线节点通讯卡的硬件组成，软件流程做了较详细的说明。
The hardware composition and software flowchart of the CANbus node communication card are described in detail.
深入探讨了DSP技术和计算机的总线接口技术，设计了PC及DSP的硬件电路接口。
Deep research into DSP technology and computer bus technology, design the hardware and circuit interface of PC and DSP.
在其硬件设计中，着重介绍了CAN总线通讯接口卡的选择、CAN节点设计与信号采集系统设计。
In the section of hardware design, selection of the CAN bus communication interface card, design of CAN nodes and the signal acquisition system are introduced.
本文介绍基于CAN总线的电梯控制系统，并对总体方案、软硬件设计作了分析，给出了具体设计电路以及软件流程图。
This paper introduces the control system of elevator based on CAN bus, analyses its hardware and software and provides hardware design and flow chat.
基于CAN总线的飞行控制系统不仅可以节约硬件成本和设计、安装费用，同时还可以节约系统软硬件的后期维护费用。
The flight control system based on CAN bus does not only save hardware cost and installation cost, but also save its later maintenance cost.
给出了一种OBS边缘节点总线控制的硬件设计方案。
A hardware design of bus control module in OBS edge node is reported.
详细介绍了具有USB接口的MVB总线适配器的硬件原理及软件编程方法。
It is detailed the hardware principle and software programming method of the MVB bus adaptor with USB interface.
介绍该系统的硬件结构、总线协议的模块划分及其内部结构。
The hardware design, bus protocol module division and its internal structure are introduced.
论述了星载合成孔径雷达（SAR）回波信号模拟源的一种实时实现方法和基于PCI总线与CPLD的硬件设计。
This paper introduces a real-time spaceborne SAR simulator and the hardware design based on the PCI bus and CPLD chip.
采用面向多媒体处理的改进总线结构，实现了硬件平台的可配置和可重用性。
Using improved bus structure method for multimedia processing, reconfigurable and reusable hardware platform was realized.
介绍了一种适用于计算机集散控制系统的无线总线的构成原理、设计方案、硬件实现与应用示例。
This paper introduces a kind of wireless composing principle, designing plan, hardware realizes and application examples that apply to computer collector distributor control system.
本文以应用于工业测试系统的在线状态检测数据采集系统的设计为例，讨论了基于DSP数字信号处理器和USB通用串行总线接口数据采集系统的软硬件设计的主要步骤和过程。
Taking the design of the industry on-line state detection Data Acquisition System as example, the paper discusses the main processes on the software and hardware design based on DSP and USB.
在硬件方面采用了基于现场总线技术的现代通信方式。
In the aspect of hardware, the modern communications way with Field Control Bus is introduced.
为达到此目标，现场总线网络从硬件和通信协议上对传统网络作出了改进。
Aiming at this goal, it improves its hardware and communication protocol from traditional computer networks.
为达到此目标，现场总线网络从硬件和通信协议上对传统网络作出了改进。
Aiming at this goal, it improves its hardware and communication protocol from traditional computer networks.
应用推荐