本文介绍了基于SPI总线模块ZLG7289A的人机接口设计。
This paper presents a design of human computer interface based on SPI-bus module ZLG7289A.
本位置伺服系统它采用STD总线模块式的多cpu结构，主要面向经济型数控机床。
The position servo system it USES STD bus module type more CPU structure, mainly for economical nc machine tools.
介绍了利用可编程控制器(plc)、仪表、CAN总线模块作为前沿智能节点组成的污水处理系统。
The waste water treatment system combining PLC, instrument and CAN BUS as smart node is presented.
最后，在研究EP -H31580 1553总线芯片的基本功能和读写时序的基础上，完成了1553总线模块的硬件设计。
At last, 1553 bus circuit design has been finished on the basis of studying the basic function and timing of 1553 chip EP-H31580.
介绍了通用串行总线模块usb10 0模块的基本特点和使用方法，并给出了USB10 0与单片机的硬件接口电路和通信程序源代码。
The fundamental characteristics of USB100 and its application are introduced. The interface circuit between USB100 and MCU is given, and the source code of communication program is listed.
介绍了一种应用pic 18 F系列单片机片上CAN总线模块实现CAN总线节点的新方法，给出了系统的组成和硬件配置，讨论了系统软件设计和测试原理。
A new method of node implemented with PIC18F MCU on CAN bus is introduced in this paper. The structure and hardware configure are described, the software design and test principle are discussed.
在中介模块中，可以对消息进行日志记录、充实、传输或路由，从而通过总线集成服务。
Within the mediation module, the message may be logged, augmented, transformed, or routed to integrate services across the bus.
SCA系统总线由SCA运行时用于与SCA组件和SCA模块之间的异步通信。
The SCA System Bus is used by the SCA runtime for asynchronous communication between SCA components and SCA modules.
SCA应用程序总线主要用于SCA模块的自定义目的地。
The SCA Application Bus is most commonly used for custom destinations of SCA Modules.
端口目的地将其发送到正在使用的协议的总线Invoker模块（没有公开给用户）。
The Port Destination sends it to the bus Invoker module for the protocol being used (which is not exposed to users).
总线Invoker模块通过WSDL文件中的端点地址将SOAP消息发送到Web服务提供者。
The bus Invoker module sends the SOAP message to the Web service provider using the endpoint address in the WSDL file.
如果不提供JNDI名称，将根据模块以及导入或导出名称命名目的地，并且在缺省情况下，在SCA应用程序总线上创建它。
If the JNDI name is not provided, it will name the destination based on the module and import or export name, and create it on the SCA application bus by default.
同时，由于工业现场对抗电磁干扰和传输距离有比较高的要求，所以本设计采用CAN总线作为各个模块通讯的方式。
At the same time, because of high requirement of anti-electromagnetism interference and long distance this design uses CAN bus as the communication style of every module.
加密卡是基于计算机总线接口的、提供密码服务功能的硬件模块。
Cipher Card is a hardware module based on bus interface of computer and offering cryptogram service function.
软件设计主要包括以下功能模块：接收总线数据、控制EMPC、监控电力汇流条、传送汇流条控制器状态等。
The software includes the following function modules: bus data receive, EMPC control, electrical bus monitor, status data transmission and so on.
微控制器协调这些模块，并为主CAN 总线提供网关。
The microcontroller coordinates the modules and provides the gateway to the main CAN bus.
介绍了串口编程技术，RS485总线驱动模式和RS485串口驱动程序。 然后在此基础上设计和实现了SDM300远程控制模块和异步信道的通信模块。
Findally, we implement SDM300 remote control module and Async communication module on the basis of introducing technology of serial programming , RS485 bus driving mode and RS485 serial driver.
该系统从功能上可以分为数据采集模块、无线数据传输模块、通用串行总线接口传输模块。
The system can be divided into three modular by function, sensing data acquisition part, wireless data transmitting part, and universal serial interface part.
PLC和远程I/O模块之间的控制和通信通过CAN总线来实现，其通信距离可以达到几百米。
The controlling and communication between the PLC and the remote I/O modules are used by the CAN bus, the distance can be several hundred meters.
系统硬件采用了嵌入式PC、通讯接口卡和现场总线数据采集模块。
The hardware is constructed with embedded PC, communication card and field bus data acquisition module.
介绍该系统的硬件结构、总线协议的模块划分及其内部结构。
The hardware design, bus protocol module division and its internal structure are introduced.
总线仲裁器模块广泛地应用于控制类芯片的各个领域。
Bus arbiter module is used in many fields of industry control.
在应用层开发上研发任务间通讯服务（ICS）消息总线和邮箱服务，承担模块化设计的各功能进程的通讯控制和数据交互。
The ICS message bus and mailbox are used in application layer of the software architecture, which make it easy to transfer data and communicate each other between processes.
因此基于EIB总线协议的应用模块开发是该领域值得研究的课题。
Therefore the application module development based on EIB protocol is an issue worth of research.
数据存储传输模块采用PCI总线和FIFO数据存储器对大量的数据进行连续存储传输，保证数据的准确完整。
In data storage transmission modular, we adopt PCI bus line and FIFO data memory carry out succession for plenty of data to storage transmission, guarantee AE signal accurate collecting.
虚拟仪表筛选、分析、判断并显示各测控模块发给总线的报文。
Virtual instruments select, analyze and judge, display messages sent by each test module.
该模块具有RS-422总线接口与两路PAL制式复合视频输出端。
This module has a RS-422 interface and two standard PAL TV video output channel.
介绍了一个支持现场总线的智能数据采集控制系列模块成功运用于铁路信号系统的远程控制的工程实例。
An engineering sample with intelligent data collection control series modules to support field bus and remote control of railway signal system is introduced.
介绍了一个支持现场总线的智能数据采集控制系列模块成功运用于铁路信号系统的远程控制的工程实例。
An engineering sample with intelligent data collection control series modules to support field bus and remote control of railway signal system is introduced.
应用推荐