研究有限状态机与PCI总线接口控制器的设计问题。
Studies issues in the finite state machine (FSM) design in PCI bus interface controllers.
单个微控制器通过spi兼容的串行接口控制整组电池监视器，该微控制器也是至主CAN总线的网关。
A single microcontroller controls the entire stack of battery monitors via the SPI-compatible serial interface, and it also is the gateway to the main CAN bus.
该配料控制器还配有标准的RS—485总线接口，较好地实现了配料控制系统的网络化设计。
The batch controller also has a standard interface of RS-485 bus, preferably achieved the network design of the batch control system.
在此基础上提出了以超磁致伸缩材料为阀芯，以DSP为控制器，带有总线型接口的高速开关阀的研究课题。
And then it puts forward study on the high speed switch valve, using GMM as valve's core, adopting DSP as controller and designing bus communication interface.
给出了PCI总线配置空间的设计以及PCI接口控制器中时序状态机的实现。
The design of the PCI bus in the interspaced ordonnance, and the realization of the sequence state machine in the PCI interface controller is given.
接口是数字控制器与伺服驱动器间的串行实时通信总线。
SERCOS (SErial Real-time Communication System) is the serial real-time communication fieldbus between digital controller and servo-driver.
研究usb总线技术在电脑外设接口中的应用以及实现USB总线接口的芯片控制器。
The application of USB technology for the device connected to PC and the USB controller.
它提供的接口之间的连接控制器和物理总线线。
It provides interfacing between a link controller and the physical bus wire.
总线控制器作为管理计算机与现场总线的接口装置，起到了管理计算机与智能仪表数据双向传输的网桥作用。
As a network bridge, communication controller is the interface device which realize the function of communication between supervise PC and field bus.
根据PCI总线操作时序，提出了从设备接口控制器的有限状态机模型。
The FSM model of target PCI bus interface controller is then provided based on PCI bus operation timing.
一般来说，对于RGB总线接口的数字屏都需要有控制器才能正常显示，但是本文利用STM 32处理器设计出了一种能直接挂载rgb接口数字屏的方法。
Generally speaking, the figures for RGB bus interface screen needs a controller to display properly, but this paper USES STM32 to design the digital screen with directly mounted RGB interface.
其设计包括不同数据节点的CAN控制器，及单片机控制的CAN接口模块和基于DSPTMS320 LF 2407a的CAN总线接口等。
The design includes designs of different can controllers for different data nodes, the can module controlled by single chip computer and can bus interface based on DSP TMS320LF2407A, etc.
然后分别以内嵌CAN控制器的DSP芯片TMS320 LF 2407和CAN 232智能CAN接口卡为例说明了它们与CAN总线通信的工程实现方法。
Then taking DSP chip TMS320LF2407 embedded in CAN controller and CAN232 intelligent CAN adapter card as examples, it illustrates the engineering method of their communicating with CAN bus.
PDIUSBD 12芯片能够实现微控制器的并行总线到总线的接口功能，使用芯片可以实现多种类型的外设。
PDIUSBD12 may be used for implementing the interface between the parallel bus of the micro-controller and USB. With PDIUSBD12, users can implement multiple classes of USB functions.
CAN总线接口采用协议控制芯片SJA1000，配以收发器82c250。以太网接口采用以太网控制器rtl 8019as作为物理层传输媒介。
CAN-BUS interface adopts protocol control chip SJA1000 plus receiving and sending chip 82c250. Ethernet interface adopts Ethernet controller RTL8019AS as physical transmission media.
笔者设计的GPIB控制器采用PCI接口总线来实现和PC机的联结。
接下来对本系统所用到的CAN总线的原理、CAN控制器和CAN高速收发器进行了详细的介绍，并给出了CAN总线接口的设计方案。
Then detailed representations for CAN-BUS principle, CAN controller, CAN high-speed transceiver, and design project for CAN-BUS interface were given.
介绍了一种基于CAN总线的分布式工业机器人控制器的研究开发情况，实现了总线与各模块的接口设计，并制定出相应的机器人控制器内部通信协议。
This paper introduces a kind of industrial robot based on CAN and implements the interface between the communication bus and the system's modules. It also brings forward communication protocol.
智能型控制器带有可通信接口，通过现场总线由计算机控制，实现供电系统的遥测、遥调、遥控和遥信功能。
The intelligent controller has the communication capable interface and is controlled by computer via fieldbus, therefore it is able to have function of remote me…
将USB所具有的独特优点引入到以GPIB为标准的自动测试系统中，设计并开发了具有USB总线的GPIB接口控制器和性能较为完善的VISA函数库，介绍了所设计的GPIB控制器VISA标准函数的格式与功能。
The inimitable merits of USB are introduced into the GPIB automatic testing system and the GPIB controller with the USB bus and the VISA function lib is designed and developed.
给出了一种基于FPGA实现PCI总线目标模块接口控制器的设计方案，用时序状态机来实现总线访问操作复杂的时序。
PCI target interface controller design with FPGA is proposed. And the realization of the complication of the access sequence to the BUS interface controller is expressed by sequence state machine.
在数据通信方面，提出了由总线控制器与报文收发器构成的CAN总线接口电路，并详细论述了与总线接口初始化、总线中断处理、总线数据收发相关的设计实现过程。
For the purpose of data communication, the paper lodges the CAN interface circuit, and expatiates the programs of bus initialization, bus interrupt service routing, receiving and sending bus data.
系统的扩展和移植难度发现的PCI(外设组件接口)总线运动控制器或PC(可编程控制器)的手段。
Difficulty of system Extending and transplant are found by means of PCI (Peripheral Component Interface) bus motion controller or PC (Programmable controller).
系统的扩展和移植难度发现的PCI(外设组件接口)总线运动控制器或PC(可编程控制器)的手段。
Difficulty of system Extending and transplant are found by means of PCI (Peripheral Component Interface) bus motion controller or PC (Programmable controller).
应用推荐