模拟的结果还可以帮助对流程模型进行调整，以使得模拟运行执行的结果与期望的性能测定结果更为接近。
Simulation results also might help in tweaking the process model to make simulation runs perform closer to the expected performance measurements.
然后，您可以在形式化的分析、模拟和原型设计中使用这些模型，以研究预期的系统行为，并且可以在编写文档或总结时使用这些模型，以便就系统的性能和外观进行交流。
You can then use these models in formal analysis, simulation, and prototyping to explore predicted system behavior and in documentation or reviews to communicate the system's capabilities and feel.
由于该模型只用一个参数来描述，所以极大地简化了整车性能的模拟计算。
As there is only one parameter used in the model, so the simulation calculation of motor vehicle performance is greatly simplified.
模拟技术可用于构造系统模型以预测系统在给定环境下的性能。
A simulation technique can be utilized to create a system model to predict the system performance under the given environment.
为了建立发动机数学模型和验证CRUISE软件模拟计算的精度，分别做了发动机稳态试验和整车性能试验。
The engine stable experiment and passenger car road test were done in order to build the engine model and testify the accuracy of the simulation by CRUISE.
针对材料性能的随机性和裂缝分布的随机性，引入了随机性模型，采用蒙特卡罗法来模拟其随机性。
Aiming at the randomicity of concrete crack, the author adopt the randomicity finite element model and Monte-Carlomethod to simulate the randomicity of material character and crack distribution.
实例表明，在工艺优化设计和器件性能预测中用回归模型代替工艺-器件模拟具有较大的优越性。
The examples indicate that using regression model instead of process and device modelling is superior in process optimized design and device performance prediction.
变速器速比分配的数学模型在模拟计算整车性能的过程中起着十分重要的作用。
The mathematical model of transmission speed ratio distribution plays a very important role in the course of motor vehicle performance simulation calculation.
提供的结果来自飞机进气道的设计和性能研究，分析所用的数据来源于进气道模型风洞实验和CFD数值模拟。
This paaer presents selected results from several investigations of ari inlet design and performance. Diagnodtic data are from airfame-inlet model wind tunnel tests and CFD simulations.
本文利用模型试验和计算机模拟的方法，对不同构造窗户的采光性能和节能效果进行分析研究。
In this paper are studied the daylighting properties and energy -saving effect of Windows of different construction by means of model test and computer analogue.
文中利用传递矩阵法，建立了某轿车消声器与发动机的联合模型，对该消声器的各项性能进行了数值模拟。
A united model for engine and its exhaust muffler of a car is established using transfer matrix method, and a numerical simulation on the performances of exhaust muffler is conducted.
结果表明本文采用的分析复合材料结构耐撞性能的模拟策略和方法及建立的有限元模型是合理可行的。
The results are compared well with the experimental data that in turn verifies the proposed numerical simulation strategy and method.
本文建立的性能预测模型考虑了气相的可压缩性和沿流道的截面面积的变化，介绍了数值模拟的方法和步骤。
A performance prediction model is established in this paper which taking ac count into gas compressibility and the change of cross section area of flow channel.
模拟测试表明，模型在路径长度和访问延迟方面的性能优于原DHT。
Simulation tests show that the model is superior to original DHT at path length and access latency.
针对一种用键合线连接的简单封装模型进行射频性能的模拟。
The RF characteristics of bonding wire interconnection in a simple package model were simulated.
为充分了解分解炉的性能，应用适宜的模型来模拟分解炉内部三维流场是很有意义的。
In order to study characteristics of the calciner, it is significant to simulate the three-dimensional flow in calciner with proper mathematical models.
结果表明，本文建立的质量消光系数计算数学模型可用于预估红外烟幕遮蔽性能，而且模拟结果与实验结果基本吻合。
The results indicate that maths-model can beforehand shield performance of ir smoke, and some of results are confirmed by experiment, the experiment results are according with simulated results.
采用拟均相二维模型，对乙烯环氧化制环氧乙烷工业反应器的床层导热性能进行了模拟与分析。
The heat transport of catalyst bed in industrial reactor for epoxidation of ethylene to epoxy ethane has been simulated and analyzed by pseudo-homogeneous two-dimensional model.
本文结合模型实验与数值模拟两种手段，综合研究了横向风对自然通风干式冷却塔运行性能的影响。
This paper studies the influence of cross wind on the performance of natural draft dry - cooling tower by means of model experiment and numerical simulation.
本文中还通过模拟试验验证了相关模型和基于市场机制的知识流网络的性能和特征。
Simulations have been proposed to prove the performance and characteristics of market-based knowledge flow networks.
文章论述了车辆制动器综合性能测试中的混合惯量模拟试验台架的动力学模型。
The paper dissertates the dynamics model of mixed inertia simulation test bed about braking test.
提出一种与具体硬件结构无关、基于权重的错误注入模型，用于准确模拟基于SRAM的现场可编程门阵列抗辐射性能。
This paper presents a hardware structure-independent weight-based fault injection model for accurate emulation of the radioresistance in the SRAM-based FPGA.
将结霜模型和风机性能曲线联合起来考虑，在更加切合实际的情况下，模拟了换热器在结霜工况下的热力性能。
Thermal character of the exchanger was simulated during the frost time, considering both the frost model and the fan-coil performance curve under the engineering situation.
结果表明：该模型能够模拟单轴燃气发生器的性能，并能实现非设计转速小流量工况下的性能仿真。
It is shown that the model can properly simulate the performance of single-spool gas generator even in the states of off-design rotating speed and small flux.
探讨了利用计算机随机模拟方法研究磁性液体磁性能的物理模型与计算方法；
This paper deals with a model and methods of computer random simulation of the magnetic properties of magnetic liquids.
最后用多类封闭队列网络模型对该性能瓶颈服务器进行模拟分析，找出性能瓶颈组件。
Furthermore, a closed multi-class queuing network was used to model this server, and helped to find the bottleneck components in this server.
本文建立了悬挂犁和悬挂机构运动特性和提升性能的计算模型和计算机分析程序，能模拟悬挂犁的升降过程。
The mathematical models and the computer program which e. an be usual to analysis the movement and lift characteristics of mounting linkage and mounted plough are developed in this paper.
本文建立了悬挂犁和悬挂机构运动特性和提升性能的计算模型和计算机分析程序，能模拟悬挂犁的升降过程。
The mathematical models and the computer program which e. an be usual to analysis the movement and lift characteristics of mounting linkage and mounted plough are developed in this paper.
应用推荐