对所给出的补偿方法进行了仿真研究，结果验证了单相statcom进行快速平衡化补偿的能力比较强。
It is proved by the simulation results of the proposed compensation method that the single phase STATCOM possesses the ability to carry out fast balancing compensation.
要建立满足企业需求的快速、高效的流程，对流程进行建模、仿真、分析优化是一种比较科学且经济的方法。
Process modeling, simulation, analysis and optimizing are a kind of scientific and economic way for an enterprise to build quick and efficient processes that meet the enterprise's needs.
系统负荷投切和电容器充电的仿真结果表明，该方法能快速有效地区分暂态脉冲和振荡暂态。
The simulations of load switching and capacitor charging show that the proposed method can quickly and effectively class the impulse transient and oscillation transient disturbances.
传统的反馈环路增益仿真方法基于有源双端口网络，分析复杂，不利于快速得到环路的定量分析。
Traditional loop gain simulation method is based on two-port network models, which is complex to analysis and it is not suitable to get quantitative analysis of the loop gain fast.
仿真结果表明，DSP控制器可以获得较高的功率因数，且具有快速的电路动态响应、灵活的控制方法以及简洁的硬件设计等特点。
The simulation result shows that the DSP controller has very fast dynamic response and unity power factor, flexible control and simplified hardware design.
仿真结果表明该方法较之其他方法更快速、有效，能对地形的高度特征进行较好的描述。
By simulation it shows that the proposed method is faster and more effective than the other ones, by which the altitude feature of the landform can be well described.
根据研究所得的宽展规律，采用有限元分析与解析计算相结合的方法，建立了适合宝钢2050粗轧区带钢宽展计算的快速仿真模型。
Based on the spread rule obtained, a fast simulation spread model for 2050 hot strip roughing trains at Baosteel has been established by combining the finite element analysis and analytical model.
对连续搅拌釜式反应器（CSTR）的仿真结果表明，该集成故障诊断方法能够对多重传感器故障进行快速准确的分离和估计，并对传感器故障具有容错性。
The simulation for CSTR shows that the presented approach can isolate and estimate the multiple sensor faults quickly and accurately and the integrated system has tolerantability to sensor faults.
对标准电路仿真结果表明：该方法能够实现快速故障检测与定位，具有准确率高的特点。
Simulation results on benchmark circuits show that this scheme is feasible and has many powerful features, such as diagnosing and locating faults quickly and exactly.
此模型的仿真结果表明该模型能够提高决策的自动化和智能化程度，这是一种快速、实用、直观的方法。
The simulation results show that the fuzzy Petri nets method is fast, practical and intuitional and increases the degree of decision automation and intelligence.
结论基于长春FMS实验中心立式加工中心的分析与初步实验仿真表明：该方案方法快速、可靠、有效。
Conclusion the proposed scheme and methods are quick, reliable and effective as have been testified by actual analysis and experiments based on the machining center in the Changchun FMS center.
并以上海某市域快速轨道交通线为例，通过计算机仿真铺画列车运行图的方法，对开行快慢车后越行地点的选择以及列车始发的均衡性问题进行了分析研究。
Finally, this paper studies the problem of the selection of overtaking station and the proportion of train interval by computor simulation of train graph making on Shanghai urban rail transit line.
该方法的最大优点在于前处理简单，能运用于复杂边坡、洞室的快速开挖仿真和体型优化分析中。
The biggest advantage of the method is that the preprocessing is very simple; and it can be used in the excavation simulation and shape optimization for complicated slopes and caverns.
给出了基于FPGA的视频格式转换、快速中值滤波、自适应平台直方图双向均衡化的原理、实现方法及仿真结果。
The principium, implementation method and simulation results of FPGA -based video format conversion, median filtering and adaptive bidirectional plateau histogram equalization were given.
仿真实验结果表明，基于协商的分布式任务分配方法能够快速有效地实现对态势变化的反应，对于解决作战过程中的动态任务分配具有突出优势。
Simulation results demonstrate that the approach can react to the change of situation rapidly and effectively, and be advantageous in solving the dynamic task allocation during the operation process.
其仿真结果表明：该方法不仅具有良好的鲁棒性，而且调节快速，参数整定方法简单，适合工程应用。
The simulation results showed that this method not only had high robustness, but also was good at adjustment and simple in parameters tuning. It was fit for engineering applications.
仿真结果表明，该方法实现了过载快速无静差跟踪导引指令，对参数变化和各种干扰有较强的鲁棒性，同时有效地削弱了滑模上的抖振。
Simulation results show that the guidance application is traced rapidly by the overload without static error and the chattering on the sliding mode is effectively reduced.
该方法理论简单、实现容易且可以快速直观地得出识别结果，仿真实验结果表明新方法用于雷达信号参数类型判断具有实用性和有效性。
Its recognition results can be gained fast and intuitively. The simulation experiment results show that this new method is of practicability and validity in radar signal parameter type judgment.
将二维点扩散函数(PSF)和蒙特卡罗方法相结合，引入了一种研究混浊介质显微成像的快速仿真模型。
A rapid and accurate model used to study microscopic imaging through turbid medium is presented which combines traditional Monte Carlo with two dimensional point spread function (PSF).
实验仿真设计了两种典型的递归式MTI滤波器，结果证明该方法是一种有效的设计方法，它可以灵活而快速地设计出所需要的滤波器。
Two kinds of classical recursive MTI filters are designed in this paper. The results demonstrate the validity of this design method that can design flexibly and quickly a required filter.
本文研究了全数字原型仿真系统，对此系统进行了改进和完善，得到了由结构参数快速进行原型系统仿真的方法，由全数字原型系统来验证优化设计结果。
All the results offer the assurance for no-interference. This paper studies the digital prototype system, and get the fast-way from structure parameter to simulation.
通过前摆转向的多步态仿真游动实验，解析了鱼体柔性段弧长和相对弯曲度对质心轨迹、转动惯量、力矩、转动角位移及最大转动角速度的影响，提出了有效提高鱼形机器人快速转向性能的方法。
Through the multi-gait simulations of forward-oscillation turn, some effects of the length and the curvature of the flexible fish body on the fast-turn parameters, including track of center of…
磁体电压、磁体电流及直流母线电流仿真与实验波形吻合较好，所应用的斩波器数学模型及其控制方法能实现对超导磁体快速稳定地充、放电和续流。
The experimental and simulative waveforms of magnet current and DC bus current inosculate well, which indicates the validity of the proposed mathematical model of chopper and its control method.
探讨了利用DSP快速设计FIR数字滤波器的方法，主要是在MATLAB中调试仿真DSP程序来寻找系数的快速传递法。
The design of the FIR filter using DSP is discussed, which focus on the method of coefficient transmission over passing debugging the DSP program in MATLAB.
多端口组件网络方法是一种新的系统级统一建模方法，通过该方法形成的多端口三维组建库可以实现MEMS器件的快速设计与仿真。
The multi-port-element network method is a new unitive modeling of system-level. The fast design and simulation of MEMS devices can be achieved by 3D multi-port-elements library.
利用MATLAB7.1对建立的网络进行训练和仿真，试验结果表明了BP神经网络计算工时定额的快速性、简便性及准确性，为企业制定工时定额提供了一种切实可行的方法。
Using MATLAB7.1 to train and simulate the network, The results show that the BP Network Computing time quota fast, simple and accurate, providing a viable solution to make time quota fo…
数值仿真和柴油机故障特征选择实验结果表明，新方法可以快速、有效地求得优化特征集，是求解特征选择问题的一个较好方案。
According to the results of data simulation and Diesel engine fault feature selection example, it is proved that this scheme can get optimal feature subset...
数值仿真和柴油机故障特征选择实验结果表明，新方法可以快速、有效地求得优化特征集，是求解特征选择问题的一个较好方案。
According to the results of data simulation and Diesel engine fault feature selection example, it is proved that this scheme can get optimal feature subset...
应用推荐