孔隙网络模型广泛地用于同多孔介质有关的微观模拟中。
Pore scale network model has been widely used in the microscopic modeling associated with porous media.
交通流微观模拟是采用计算机对交通流进行描述及分析的方法。
Micro simulation of the traffic flow is a computerized method to describe and analyze the traffic flow.
微观模拟不仅可以得到材料的凝固组织，而且还能为宏观模拟提供准确的潜热释放信息。
By micro modeling not only the solidified microstructure of materials can be predicted, but also the accurate information of latent heat releasing can be provided for the macro modeling.
利用FLUENT软件的流体流动和传热问题的微观模拟功能，找到换热器内部的温度分布。
And it also makes use of the microscope simulation ability of FLUENT software on liquid flow and conduct heat.
在城市交通诱导系统没有真正实施前，借助微观模拟对其应用效果进行评价是一种行之有效的方法。
Microscopic simulation is a practically good way to evaluate the effect of a traffic guidance system before implementation.
本文发现大多数微观模拟模型，例如VISSIM，尽管使用了传统的跟弛理论，但不能自动展示双能力现象。
From this study, we found that most microscopic simulation models, such as VISSIM, use traditional car-following theory, which does not automatically exhibit the two-capacity phenomenon.
孔隙网络模型广泛应用于多孔介质的微观模拟中，已经可以较好地实现对渗流参数的定量预测，并用来描述微观渗流过程。
Pore network model is widely applied in microscopic simulation of porous media. Flow parameter is quantitatively predicted and microscopic flow process is described.
国外研究工作已经证实，微观经济计量方法和微观模拟方法是分析居民收入分配状况和评价公共政策作用效果的有效工具。
For the analysis of the income distribution and the evaluation of public policies, the general method is using micro-econometric and micro-simulation abroad.
车辆跟驰模型是微观交通流模拟的一个基本模型，用来分析和描述在无法超车的同一车道上一辆车(驾驶员)跟随另一辆车的方式。
Car following model is a basic model in traffic microscopic simulation, using to analyze and describe the way one vehicle (driver) follows another in a single lane of traffic.
交通信息获取、交通状况分析与评价是微观仿真系统实现交通模拟及方案论证功能所不可缺少的组成部分。
The traffic information obtaining, traffic status analysis and estimation are indispensable components to the micro-simulation systems for their traffic simulating and scheme reasoning functions.
与L - h模型相比较微观动力学在反应器的设计模拟工作中有更广的适用范围。
The application range of micro kinetics is wider than L-H model in simulation design of reactors.
模拟结果反映了颗粒间接触，烧结颈生长和气孔球化的微观过程。
The simulation results reflect the microscopic process such as grain contact, sintering neck growth and pore spheroidization.
以相场模型为基础，采用宏微观耦合方法和界面捕获液态方法对铝合金枝晶生长进行模拟计算。
Numerical simulation of three dimensional dendritic growth is performed by using a macro micro coupled method and a capturing liquid method.
油田水驱剩余油微观分布的实验室模拟是当前研究的热点问题。
The simulation of microscopic distribution of remaining oil in water drive field is one of the main focuses in recent research.
假定高温合金材料是单晶材料的集合体，通过数值模拟的方法，利用多晶与单晶之间的关系，可以由宏观材料参数估计微观单晶晶粒的材料属性。
Based on the aggregate relationship between of polycrystals and single crystals, orthotropic property of microscopic single crystals could be defined from macroscopic material by numerical simulation.
在微观交通流模拟中，由于驾驶行为的不确定性，难以建立精确模型。
It is hard to establish a precise model in the microscopic simulation of traffic flow because of the uncertainty of drivers' behavior.
众所周知，用有限元方法模拟异质体材料的微观组织结构、进行材料性能预测，是目前国际上通用的做法。
As everyone knows, Finite element method is in common use for forecasting organized-properties of Microstructure of Heterogeneous Materials.
文章主要分为三个部分来讨论羊群行为的微观机理与元胞自动机模拟。
The article mainly divides into three parts to discuss the microcosmic mechanism of investors' herd behavior and cellular automaton simulation.
研究言语控制的模型有修辞实例、修辞格、语体三体，分别为微观研究、功能模拟和宏观研究。
There are three types of language control: rhetorical instances, rhetorical cases and stylistics which belong to micro research and macro research respectively.
分子动力学模拟和宏微观分析均得到裂纹起始扩展的临界时刻、裂尖应力场和原子平均能量。
When crack starts to grow, the normal stress and average atom energy at the crack tip in atomistic simulation agree well with the results of continuum analysis.
根据摩擦学原理，采用动态磨损模拟试验和表面微观分析研究的方法和技术，对气门动态磨损特性进行了系统的试验研究。
The wear properties of valve are systemically investigated by using dynamic simulation testing and surface microscopic analysis techniques based on principle of tribology.
糜状食品物料微观结构图像的分析和模拟是定量研究其微结构模式形态对流变特性影响的关键问题。
The analysis and simulation for the microstructure images of minced food material are key processes in quantitatively studying the influence of microstructure pattern on rheological behavior.
本文结合微观交通模拟模型VISSIM和微观尾气模型CMEM，建立了微观交通尾气模拟平台。
This paper is intended to develop an integrated microscopic traffic-emissions simulation platform by using the microscopic traffic simulation model VISSIM and the modal emissions model CMEM.
传统的数值模拟孔隙微观结构的建模方法过于理想化和简单化；
The traditional modeling method of numerical micro pore structure simulation is too idealization and simplification;
介绍了相场方法的两种基本原理，阐述了相场方法在金属凝固过程微观组织形成模拟中的应用情况。
Two principles of the phase field method are introduced, and the application of the phase field method for numerical simulation of solidification microstructure is expatiated.
分析了用有限元法模拟线材二辊、三辊和四辊轧机轧制的特点，对线材断面的几何形状、微观组织和机械性能进行了介绍。
By simulating the features of two -, three -, four-high mill with finite element method, the geometric shape, micro-structure and mechanical property of wire section are analyzed.
采用数值模拟方法探究恒力模式下探针耦合变形对微观扫描力信号、微观形貌信号的影响。
Numerical simulations of micro scanning forces and micro topography are presented to investigate the influence of the coupling deformation of AFM probe under the AFM contact mode.
铸件凝固过程中微观组织形成的数值模拟研究是铸造学科前沿的研究课题。
Numerical simulation of the microstructure formation during casting solidification is currently an active area of research frontiers in foundry technology.
利用工业条件下的零件热处理实验对温度场和微观组织的模拟结果进行了验证，实验与模拟结果吻合良好。
The result showed that the simulated data of temperature field and microstructure agree well with the experimental ones in industrial condition.
利用工业条件下的零件热处理实验对温度场和微观组织的模拟结果进行了验证，实验与模拟结果吻合良好。
The result showed that the simulated data of temperature field and microstructure agree well with the experimental ones in industrial condition.
应用推荐