给出与微处理器接口的电路和试验。
The interface circuits with microprocessor and experimental results are given.
最适合您的系统将依赖于您的背景知识以及您深入研究微处理器接口和硬件传感器的决心。
The system that would best suit you will depend on your background and your willingness to get down into the microprocessor interface with the hardware sensors at a very low level.
功能模拟是设计高性能微处理器接口asic芯片的重要环节,目的是消除ASIC的功能性设计错误。
Function simulation, correcting logical design bug, is an important stage in design high performance microprocessor interface ASICs, which needs more flexible.
同时,FS9704还具有微处理器接口,可以通过接口总线与微处理器进行连接,控制FS9704的动作。
Meanwhile, FS9704 has the microprocessor interface, and can connect with the microprocessor through interface bus to control FS9704 action.
转换过程和数据采集过程通过CS和串行时钟信号进行控制,从而为器件与微处理器或DSP轻松接口创造了条件。
The conversion process and data acquisition are controlled using CS and the serial clock signal, allowing the device to easily interface with microprocessors or DSPs.
微处理器采用89c52,并且串行接口采用了RS- 485,可以进行在线下载和调试,以及与其它设备的连接。
The microprocessor adopts 89c52, and serial interface has adopted RS - 485, can download and debug online, and connect with other equipments.
针对基于ARM微处理器的车载导航终端中图形图像显示的需要,设计了S3C 2410与TFT - LCD的接口。
This article designed the interface between S3C2410 and TFT-LCD to meet the need of graphics and images displaying in the ARM microprocessor based navigation terminal in vehicle.
AD 7656同时具有一个高速并行接口和一个高速串行接口,为器件与微处理器或DSP进行接口创造了条件。
The AD7656 has both a high speed parallel and serial interface allowing the devices to interface with microprocessors or DSPs.
介绍一种集成usb接口的低功耗微处理器c 8051f 320设计的数据采集卡,和分析、处理、显示电参数的虚拟仪器。
Data acquisition card designed by low power chip C8051F320 with USB interface, VI about electrical parameter's analysis, manage and display, were introduced.
该a 3977接口,是一种理想的适合申请,而一个复杂的微处理器,是不可用或者不胜负荷。
The A3977 interface is an ideal fit for applications where a complex microprocessor is unavailable or over-burdened.
介绍基于ARM内核的微处理器LPC 2210、以太网rtl 8019as芯片的性能,设计了一种基于二者的嵌入式系统以太网接口方案。
The microprocessor LPC2210 with the ARM kernel is introduced, and the Ethernet-controlled chip RTL8019AS, and the Ethernet interface of the embedded system are designed.
微处理器的应用越来越涉及到接口设计。
The microprocessor application is more and more involved with the interface design.
对于多款微处理器本身没有USB的控制器,为了在嵌入式系统中使用USB设备,需要自行扩展usb接口。
When some microprocessors working with USB equipments in embedded systems without their own USB controller, their USB interface must be expanded.
文章结合工程实例,基于S3C 4510 B微处理器构建了以DM 9161为以太网物理层接口的低功耗、高速硬件电路。
Joining a engineering, this paper gives the high speed and low consuming circuit of network communication based on the microprocessor of S3C4510B, it takes DM9161 as a physical layer interface.
S3C 2410是以arm 920t为内核的微处理器芯片,接口丰富,应用广泛。
S3C2410 is a microprocessor based on ARM920T core, which has many interfaces and has been used widely.
对无线数据传输系统的构成进行了研究,阐述了基于C8051F 020微处理器和CD MA模块MG801A的数据终端的硬件设计电路和软件接口的实现。
The paper introduces structure of wireless data transmission system, and expounds realization of hardware design circuit and software of DTU based on C8051F020 microprocessor and CDMA module MG801A.
微处理器通过控制接口、按照一定的控制时序实现对FS9704的控制。
Microprocessor via the control interface, according to some control timing sequence achieves control over FS9704.
在数据采集系统中,利用DSP作为微处理器对采集到的数据进行处理,再通过USB接口将处理过的数据传输到PC机上进行存储,这样可以实现数据的快速采集与存储。
In data acquisition system, using DSP to process the collected data, and then transfering the processed data to PC by USB interface, this can archive fast data acquisition and storage.
课题采用嵌入式微处理器负责控制整个通信板卡系统,从而将接口处理速度有效的提高了。
This topic use the embedded microprocessor to be responsible to control the entire communication card system, thus processing speed is effectively enhanced.
介绍了一种以ARM微处理器LPC2106为核心的嵌入式以太网接口设计方法。
The paper introduce a design of embedded Ethernet interface which base on ARM microprocessor LPC2106. The paper describe the hardware and software design of this system.
本文介绍了ADC0809与8085微处理器的几种接口方法。
This paper describes several methods for interfacing with ADC0809 and 8085 microprocessors.
由嵌入式微处理器对其进行存储与管理,通过无线的数据传输接口,实现数据的接收与传送。
Using Embedded microprocessor to store and manage it and wireless data transmission interface, we can realize the function of reception and transmission of data.
电子计算器是一种典型的大规模数字集成电路,主要由微处理器和外围的显示电路、键盘接口电路等组合而成。
Calculator chip is a typical kind of digital large scale integrated circuit. It consists of microprocessor and peripheral display diver and keyboard interface circuit.
其装置是引入补偿单元,由探测器、微处理器、数字接口组成。
The device is a compensating unit comprising detector, microprocessor and digital interface.
ARM7系列是广泛应用的嵌入式微处理器,目前ARM7处理器的目标板大多是由成熟的评估板裁减而成的,一般没有PS2接口。
The series of ARM7 is extensive and widely applied microprocessor, while the current object circuit board of ARM7 are cut by mature evaluating board without PS2 interface.
由传感器、微处理器和无线通信接口组成的无线传感器网络是一门日益引起人们研究兴趣的技术。
Wireless sensor networks, composed by sensors, microprocessor and wireless communication interface, is an interesting field, and gain more and more attentions.
阐述了AD 7710的模拟电压输入、基准电压输入以及与微处理器的数字接口电路。
The circuit of analog input, reference input and the serial digital interface with microcomputer of AD7710 is presented.
该器件具有一个高速并行接口,可轻松与微处理器、微控制器和数字信号处理器进行接口。
The part offers a high speed parallel interface for easy connection to microprocessors, microcontrollers, and digital signal processors.
转换过程和数据采集过程通过CS和串行时钟进行控制,从而为器件与微处理器或DSP接口创造了条件。
The conversion process and data acquisition are controlled using CS and the serial clock, allowing the devices to interface with microprocessors or DSPs.
针对数字信号处理器与其他微处理器的不同之处,文中着重介绍了等待状态发生逻辑电路及数字信号处理器与外部芯片的数据接口电路。
In view of the disparity among DSP and other microprocessors, the logic circuit in waiting requisition and the data exchanging interface among DSP and external chips is offered.
应用推荐