径向负荷的重量是多少轴垂直放在上面。
Radial loading is the amount of weight placed vertically above the axle.
使轴承上的径向负荷不对轴造成相对弯曲。
No inclination of shaft relative to the will be caused by the radial load acting on the bearing.
因此，他们的径向负荷能力优于深沟球轴承。
Thus their radial load capacity is superior to that of deep groove ball bearings.
推力球轴承不能承受径向负荷，极限转速较低。
Thrust ball bearings can bear radial load, lower speed limit.
径向负荷能力大，合用于有重负荷、冲击负荷的情况。
调心滚子轴承可以承受径向负荷及二个方向的轴向负荷。
Adjusting roller bearings can bear the load and two radial direction of the axial load.
调心滚球轴承可以承受径向负荷及二个方向的轴向负荷。
该类轴承主要用以承受径向负荷，也可承受一定的轴向负荷。
This class will be mainly used for withstanding radial bearing load, can withstand certain axial loads.
深沟球轴承主要承受径向负荷，也可承受一定量的轴向负荷。
Deep groove ball bearing can mainly endure radial load, and it can also endure some measurable axial load.
这种轴承主要用来承受以径向负荷为主的径向与轴向联合的负荷。
These bearings are used to support combined radial and axial loads with the radial load prevailing.
双列圆锥滚子轴承在承受径向负荷的同时也可承受双向轴向负荷。
Double row tapered roller bearings can accommodate simultaneously radial load and also axial load in double directions.
因为它是目前最流行的类型，其径向负荷能力被分配到一个价值之一。
Because it is the most popular type, its radial load capacity is assigned a value of one.
没有人告诉我们，是轴承密封盒是专门设计的径向负荷和轴向负荷不优化。
What we are not told, is that sealed cartridge bearings are specifically designed for radial loading and not optimized for axial loading.
主要承受径向负荷为主的径向与轴向联合负荷，一般不宜单独承受径向负荷。
Mostly bearable of the radial-load-leading radial and triaxial combination load , normally unfavorable of solely taking on the radial one.
除轴向负荷外，此类轴承还能承受一定的径向负荷（见“当量轴承动负荷”）。
These bearings can accommodate a certain proportion of radial load in addition to the axial load (see under "Equivalent dynamic bearing load").
该型适用于非常温环境下，主机两端轴(轴承)安装无法严格同心时的径向负荷上使用。
This type is suitable for high temperature environment, the host end shafts (bearing) installation could not be strictly concentric when the radial load on the use of.
一般情况下只能承受径向负荷，只有内外圈均带档边单列轴承可以承受较小的常定轴向负荷。
Normally these bearings can accommodate radial load only, none but single row bearings with ribs both on inner and outer rings can carry partial lighter axial load.
回转支承轴承是一种能够承受综合负荷的大型支承轴承，可同时承受较大的轴向负荷、径向负荷和倾翻力矩。
Slewing ring bearings to withstand a large-scale integrated load bearing support, which can bear a greater axial load, radial load and tipping moment.
恒定的径向负荷(恒定的中心轴向负荷)，在该负荷下，滚动轴承理论上可以经受1百万转的基本额定寿命。
Constant radial load (constant axial load center), in the load, the bearing can withstand 1 million transfer theory, the basic rating life.
调心滚子轴承承受径向负荷，双向轴向负荷及其合成负荷的能力较大的场合，适合于承受振动，冲击负荷的用途。
Spherical roller bearings are subjected to radial load, bidirectional axial load capacities and synthetic load more, suitable to withstand vibration and shock loads.
由于对旋轴流式风机电动机轴承要承受较大的轴向负荷和径向负荷，实际使用过程中常发生电动机轴承损坏的现象。
Due to the strong axial and radial load to the bearing of electromotor in counter-rotating axial fan, it is always occurred that the bearing was damaged in use.
径向负荷的重量是多少轴垂直放在上面。三轮车坐在一个地方对轴承的轴向负荷。下图是一个径向轴承截面的看法。
Radial loading is the amount of weight placed vertically above the axle. Sitting on a trike places an axial load on the bearings. The drawing below is a cross-sectional view of a radial bearing.
本文利用拟动力学法，同时考虑径向负荷、轴向负荷、自身离心力以及陀螺力矩作用的影响，建立了高速滚珠轴承载荷分布的分析模型。
Considering radial load, axial load, centrifugal force and gyroscopic moment acted on the ball bearing simultaneously, an analysis model based on quasi-dynamic method was set up in this paper.
主要是承受载荷方向不一样，向心轴承是主要承受较大的径向载荷和一部分较小的轴向负荷，推力是承受较大的轴向载荷和较小的径向负荷。
Bear the load direction is mainly not the same, the main bearings to the heart to bear a larger part of a smaller radial load and axial load to bear large axial thrust loads and a smaller radial load.
然而，他们只有当同时受轴向负荷时才能够承受径向载荷。
However, they can sustain radial loads only when simultaneously subjected to axial loads.
单列角接触球轴承可承受径向，轴向或复合负荷，不过，任何轴向负载必须在一个方向。
Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.
大多数轴承都支承径向或轴向负荷的转轴。
Most bearings support rotating shafts against either transverse (radial) or thrust (axial) loads.
设计有多种径向游隙和接触角，满足不同的应用负荷和偏斜要求。
Design a variety of radial clearance and the contact Angle, to meet different application requirements of load and deflection.
这类轴承没有填充槽，除径向载荷外，还能承受双向作用的轴向负荷，即使在高转速下也是如此。
Does not fill the tank of these bearings, in addition to radial loads, but also can withstand the axial load in both directions, even at high speeds as well.
组合式滚针轴承是由一个向心滚针轴承和一个推力轴承相结合，因此能够承受径向和轴向负荷。
Combined needle roller bearings consist of a radial needle roller bearing combined with a thrust bearing and are consequently able to take up both radial and axial loads.
应用推荐