这些稳定的、增强的含水粘弹性液体可被用作地下含烃地层例如水力压裂中的处理液。
These stabilized, enhanced, aqueous, viscoelastic fluids may be used as treatment fluids for subterranean hydrocarbon formations, such as in hydraulic fracturing.
介绍两种适用于分批精馏及多用途填料塔的液体分布器——槽式和双排管式高弹性液体分布器。
Two kinds of liquid distributors, with high turndown ratio, for batch distillation and multi-purpose packed columns are described in this paper.
这么多年来,美国消费者对液体燃料的需求似乎是没有价格弹性的——不管这个燃料是用来驱动汽车,还是用来在早上刺激大脑。
For years it seemed that American consumers' demand for liquid fuel was price inelastic-whether it was to drive their cars or get their brains going in the morning.
固体颗粒介质成形新工艺,是采用固体颗粒代替刚性凸模(或弹性体、液体)的作用,对金属板料成形的工艺。
Solid granules medium forming new technology (SGMF) is a technology which USES solid granules medium instead of rigid punch (or elastomer, liquid) to achieve the sheet forming.
使用隔热的弹性或刚性管道来从储存罐中取出液体产品。
Insulated flexible or rigid lines are used to withdraw product from storage tanks.
用离子型液体制造的纤维,就强度和弹性而言,已显示出与NMMO和粘胶法制造的纤维相似的性质。
Cellulose fibers manufactured with ionic liquids are already displaying similar properties in terms of tenacity and elasticity compared to fibers manufactured by the NMMO and viscose process.
介绍了采用超声光栅效应测量液体体积弹性模量基本原理,设计组装了实验测量装置。
Introduced the basic principle of the measurement of liquid bulk elastic modulus, designed and assembled the experimental equipment.
把葡萄简化成球形的、均匀的、各向同性的和内部充满不可压缩液体的弹性膜。
The grape was assumed as a spherical homogeneous, isotropic elastic membrane, which was fully-filled with incompressible, high viscous liquid.
此类密封胶包括经硫化可形成真正弹性状态的液体聚合物,它们具有承受重复的接缝变形能力。
Such sealants include the formation of sulfide can be really flexible polymer liquid state, they have to bear the ability to repeat the joint deformation.
注意:由于塑料的弹性,稍长一点的扩展单元更容易受到液体样品的影响而弯曲。
NOTE: Because of flexibility of the plastic, longer units are subject to more bending when filled with liquid.
气体和液体是很有弹性的。在它们受压缩以后,当施加的力一移走,它们就马上恢复原来的体积。
Gases and liquids are perfectly elastic, after their being compressed they return to their original volume as soon as the applied force is removed.
液体弹性波对管道中流动的液体产生压力冲击波,并引起剪切作用。
In the pipeline, the liquid elastic wave can emerge pressured shock wave to flowing liquid and cause shear action.
介绍了固体颗粒介质成形新工艺,即采用固体颗粒介质代替刚性凸模(或弹性体、液体)的作用对板料进行软模成形的工艺,并阐述了新工艺的优点。
Solid granules medium forming technology is an advanced soft-tool forming technology which USES solid granules medium instead of rigid punch (or elastomer, liquid) to form sheet.
气体和液体都是完全的弹性体。
运用水弹性力学理论论述了液体晃荡与弹性液舱耦合作用的分析方法,建立了相应的水弹性力学方程。
The coupling action between sloshing liquid and flexible structure is also analyzed associated with the hydroelasticity theory and corresponding hydroelastic equations are established.
根据实验数据分析了液体体积弹性模量的变化规律。
Analyzed the variation law of several representative liquid bulk elastic modulus according to the experimental data.
考虑了具有弹性底板的部分充液的有限长方形容器内的液体的耦合晃动问题。
This paper studies the coupled oscillations of liquid in a partially-filled container of finite size and having an elastic bottom and rigid walls.
这种液体迅速硬化成为一根细的、有弹性的长约一英寸的细丝。
The liquid quickly hardens into a fine, elastic thread about an inch long.
硅酮(亦称聚硅氧烷):可制成液体、树脂和弹性体多种形态的聚合物。
Silicone (polysiloxane) : Any of a diverse class of polymers manufactured as fluids, resins, or elastomers.
结果表明,随着油液体积弹性模量的下降,泵的流量脉动及流体噪声均增大。
It was shown by calculation results that the flow ripple and fluid noise of hydraulic pump increased seriously when the bulk modulus descended.
最后,我们对处于有限单向预拉伸软弹性衬底上的液体薄膜由于范德华力驱动而产生的失稳进行了线性稳定性分析。
Finally, we study the instability of a thin liquid film resting on a uniformly stretched soft elastomeric substrate driven by van der Waals forces by a linear analysis.
其弹性球丸内充满液体,由于液体的相对不可压缩性和表面张力的作用,可促使弹性球丸受力变形后的迅速恢复。
The elastic ball is fully filled with liquid. When the said elastic ball is forced to deform, it can be quickly restored as the liquid has the relative incompressibility and surface tension.
固体颗粒介质成形新工艺,是采用固体颗粒代替刚性凸模(或弹性体、液体)的作用,对金属板料成形的工艺。
Solid granules medium forming technology is an advanced soft-tool forming technology which uses solid granules medium instead of rigid punch(or elastomer, liquid) to form sheet.
实验研究内容包括在同一温度时油水混合液体积弹性模量随油水比的变化规律。
The experiment research content includes: the variation law of the changes of liquid bulk elastic modulus according to the changes of ratio of oil to water at the same temperature,.
揭示了液体晃动与结构弹性体振动的本质联系,便于应用结构有限元程序求解流体—结构耦合问题。
The present method can also be easily extended to solve liquid-structure interaction problems by using structural FEM codes.
为了测量矩形弹性壳液耦合系统中的重力波的三维外形,实现大变形液体的非接触测量,使用激振器时矩形弹性壳液耦合系统在水平方向进行激振,得到大幅低频重力波。
The 3-d shapes of gravity waves in rectangular elastic fluid-shell coupled system are presented to realize the untouched measurement of the fluid large deformation.
聚氨酯原料是液体,可被注射入任意形状和大小的模具进行浇铸,而其他热塑性弹性体采用传统工艺进行混合,研磨及压铸。
Polyurethane raw materials are liquid and can be cast into limitless shapes and sizes in low pressure moulds while other elastomers are mixed, milled and moulded using traditional industry techniques.
[10]徐巨华。油液体积弹性模量对电液伺服系统动态特性影响研究[D]。杭州:浙江大学,2013。
XU Juhua. Research on Dynamic Characteristics of Servo System with Oil Bulk Modulus [d]. Hangzhou: Zhejiang University, 2013.
[10]徐巨华。油液体积弹性模量对电液伺服系统动态特性影响研究[D]。杭州:浙江大学,2013。
XU Juhua. Research on Dynamic Characteristics of Servo System with Oil Bulk Modulus [d]. Hangzhou: Zhejiang University, 2013.
应用推荐