所制备的异形纤维的径向异形度达到40％以上；
The shaped degree of radical direction of manufactured profiled fiber was above 40 %;
用分类方法比较不同截面异形纤维的吸湿排汗效果。
The moisture management of fabrics containing different cross-section fiber are also compared.
文中推荐的系统指标比较适合于表征异形纤维的特征。
Systema-tic indexes recommended in this treatise are more suitable for indicating the characteristics of profile fibers.
通过试验，分析了异形纤维的截面形状对织物导湿快干性能的影响。
By experiments, it analysed the influence of cross sections of profile fiber on the properties of moisture-transfer and dry-fast.
论述了异形喷丝板设计的技术关键条件和异形纤维开发中各种纺丝条件对纤维异形度的影响。
The key technical conditions for the design of shaped spinneret plates and the influence of various spinning conditions on fiber modification ratio during the shaped fiber development are discussed.
在聚酯废料生产三角异形涤纶短纤维过程中存在影响纤维截面异形度的因素。
During producing triangular shaped polyester staple fiber from polyester waste, there are some factors that affect the heteroclite dacron fibres.
根据所建立的模型，模拟了纺丝工艺条件对纤维异形度的影响。
The effect of spinning technology conditions on fiber shaped degree was simulated by using the established model.
通过异形喷丝板的设计及特殊纺丝和后拉伸工艺生产了闪光扁平涤纶短纤维。
Shine and flat polyester staple fiber was produced by using profiled spinneret and special spinning and drawing process.
结果表明：喷丝速度对PAN纤维截面的规整性、表面形貌、异形度、声速取向和致密性等均会产生影响。
The results showed that the extrusion speed had effects on the irregularity of cross section, surface morphology, profile degree, sonic orientation and compactness of PAN fiber.
本文中所使用的异形腈纶纤维不同于普通腈纶纤维，是采用干法纺丝方法制得的。
Different from general acrylic fiber, the profiled acrylic fiber used in the experiments is produced by dry spinning method.
针对不同种类异形钢纤维进行了弯曲韧性、断裂韧性、立方体抗压强度等试验。
Experiments on bending toughness, breaking toughness and cube strength test results are carried out in connection with various kind of deformed steel fiber.
自行设计了异形钢纤维与混凝土粘结强度试验方法。
The experiment methods of the bonding strength between deformed steel fiber and concrete was self-designed.
研究了纺丝温度、压力、收丝速度对纤维异形度和当量直径的影响。
The effect of spinning temperature, spinning pressure and rotation velocity on the fiber's degree of profile and effective filament diameter was analyzed.
对比分析了用视频显微镜、普通生物显微镜、显微投影仪测试异形截面纤维特征参数的方法和特点。
Three methods and their measurement of characteristic parameters of profiled fiber with video microscopy, microscopy and projection are compared and analyzed.
结果表明：纤维异形度随纺丝温度、纺丝压力、收丝速度的升高而降低。
The results were showed that the profile degree of trilobal PCS fibers decreased with a rise in spinning temperature, spinning pressure and rotation velocity.
论述了约束成形剪切法加工异形钢纤维的原理和剪刀片的磨损机理。
This paper discusses the processing principle for the varied shape steel fibers by restrained shaping shear method and the wear mechanism for shear bits.
介绍一种异形截面碳纤维，并对其环氧复合材料的力学性能进行研究。
A kind of irregular section carbon fiber and its epoxy composite were involved.
讨论了喷丝孔孔型、喷丝板特征尺寸、异形孔的排列方式、冷却条件对纤维异形度的影响。
The effects of spinneret hole shape, characteristic dimension of spinneret, hole arrangement and cool conditions on degree of profile were discussed.
研究了纺丝温度、压力、牵伸速度对纤维异形度和当量直径的影响，确立了异型截面碳化硅纤维的制备工艺。
The effects of spinning temperature, spinning pressure and drawing velocity on the degree of profile and effective diameter of the fibers were studied and the preparation technology was determined.
分析异形钢纤维在拔出过程中的耗能能力及其影响因素。
Analyze the dissipated energy during the pulling out and the factors of it.
结果表明，适当控制纤维长度、含量，改性异形pp，能很好地提高水泥防裂性能。
Results show that if fiber length and weight percent is properly controlled, cement anti crack performance can be improved enormously by modified profiled PP of fiber.
在聚酯废料生产三角异形涤纶短纤维过程中对影响纤维截面异形度的主要因素：喷丝孔截面形状、纺丝温度、冷却成形条件、后欠伸工艺参数等进行探讨。
During the process of spinning triangular heteroclite dacron fibres from polyester garbage, there are factors that may affect the hetercliteness of the intersecting surface of the fibres thus spun.
介绍了以超有光聚酯切片为原料，采用熔体狭缝挤出成型技术和高速纺丝牵伸一步法工艺制取异形pet纤维的生产方法。
The bright profiled PET can be produced by the forming technology extruded from the spinneret slit and high-speed spinning-drawing with bright polyester chips.
根据试验结果分析异形钢纤维增韧效应，探讨异形钢纤维的增韧机理。
Basing on the experiment results, analyze the toughening effect of deformed steel fiber and probe into the bond mechanism of it.
异形，卵石，皮革(以7种不同颜色可供选择)使您的安全和可靠点燃，而软木炭超细纤维内部保护从划伤屏幕。
The contoured, pebble-grain leather (available in 7 different colors) keeps your Kindle safe and secure, while the soft charcoal microfiber interior protects the screen from scratches.
功能性涤纶纤维是由普通涤纶纤维经过必要的改性而制成的，如异形截面涤纶纤维，具有良好的吸湿导湿性能。
The functional polyester fiber is made from normal polyester by essential modified, and have good moisture absorption & moisture conductivity, such as profiled polyester fiber.
综述了异形阻燃纤维的国内外研究进展，详细探讨了扁平纤维纺制原理，与控制。
The main contents are as following:1. The study progress of the profile fibers in domestic and international field was reviewed and preparing technique of the flat acrylic fiber was summarized.
研究了湿法和于湿法纺制异形聚丙烯腈(PAN)纤维过程中拉伸对纤维截面形状的影响。
The effect of stretch on the cross-section shape of polyacrylonitrile (PAIN) fiber was studied during the process of wet spinning and dry wet spinning.
研究了聚碳矽烷（PCS）熔体在Y型喷丝孔中的挤出胀大机理、膨胀模型以及膨胀比对Y型碳化矽纤维异形度的影响。
The die-swell mechanism of polycarbasilane(PCS) melt for a spinneret with Y-shaped orifice and the effect of die swelling of PCS on the profile degree (PD) of Y-shaped SiC were investigated.
研究了聚碳矽烷（PCS）熔体在Y型喷丝孔中的挤出胀大机理、膨胀模型以及膨胀比对Y型碳化矽纤维异形度的影响。
The die-swell mechanism of polycarbasilane(PCS) melt for a spinneret with Y-shaped orifice and the effect of die swelling of PCS on the profile degree (PD) of Y-shaped SiC were investigated.
应用推荐