开放式数控系统是当前数控技术研究的热点。
The open numerical control(NC) system is the research hotspot of NC technology now.
当前，PC已成为开放式数控的首选硬件平台。
Currently, PC has been becoming the preferred hardware platform for CNC systems.
介绍了并联机床开放式数控系统的软件、硬件设计。
The paper introduces the design of the software and hardware of the opening NC system for the parallel machine tool.
基于此开放式数控平台，进行了复杂曲面加工的研究。
Research of complex curved surface machined on the platform has been done.
本文分析了开放式数控系统软件开发过程中可能发生的弊病。
This paper analyses disadvantages during the development of open NC system software.
该算法适用于目前流行的开放式数控系统和各种CNC系统。
It can apply to the current popular open NC and all kinds of CNC system.
其从反沉研讨了开放式数控体解的层从化和模块化体解构造。
Secondly, it mainly introduces layering and blocking architecture of open NC system.
简述了开放式数控系统的定义、特点、国内外现状和发展趋势；
This text discusses the definition and the characteristic of open type CNC system, and the developing situation of the home and abroad.
因此，采用开放式数控系统对X52K铣床进行了数控化改造。
So, the open architecture numerical control system is used to carry on the numerical control transformation to the X52K milling machine.
介绍了以PC为基础的开放式数控系统——PCNC的产生背景；
The paper introduces background of open CNC system-PCNC based on PC.
以PC为基础的开放式数控系统在结构和性能上都存在很大局限性。
There exists great limitations in architecture and performance on open nc based on PC.
针对这种情况，本文研究了基于开放式数控系统的数字化采集技术。
Therefore the digitizing collection technology based on open CNC system is studied in this paper.
实践证明，该系统完全能满足现代数控机床对开放式数控系统的要求。
It's proved by practice that this system could completely meet the request of modern numerical control machine tool for open numerical control system.
尽管开放式数控系统的概念已经出现了很久，但在业界一直未能得到统一。
Though the conception of open CNC system, but the definition of it isn't agreed by industry.
本文对基于开放式数控系统的全数控凸轮轴磨床软件系统进行了研究与设计。
This thesis presents the research and design of the software system of the open CNC based Camshaft grinding machine.
开放式数控系统不仅要实现系统的功能属性，还要尽可能地实现其非功能属性。
It realizes not only the system's function properties but also it's non-function properties with open CNC.
在开放式数控系统中，PLC模块的开发在高性能CNC系统中有着重要的作用。
The PLC is an important module to high-performance open CNC system.
总之，软件PLC有着硬件PLC不可比拟的优越性，适应开放式数控系统的发展趋势。
In a word, the soft PLC has got the superior that hard PLC can't compare to, which representative the trend of the open numerical control system.
在分析开放式数控系统和网络数控技术的基础上，首次提出了数控信息网络存储制造的新概念。
On the basis of analyzing open CNC system and network CNC technology, the new concept of nc information network storage manufacture was presented.
采用面向对象技术，以动态连接库的形式开发开放式数控系统的基本构造单元—软件功能模块。
Software modules in the form of Dynamically Linked Library using object-oriented program technology are design, which are the basic system components.
为适应开放式数控系统及现代制造技术的发展趋势，开发研制了基于PC机的数控原理实验教学系统。
To adapt to the trend in development of open CNC system and modem manufacture technique, a CNC principle experimental instructional system based on PC is developed.
经过实例验证，使用本文设计的宏指令系统编制而成的宏程序，完全可以在开放式数控系统上正确运行。
After example validating, the macro program wrote with macro instruction system designed in this dissertation can run well in open NC system.
本文以开发凸轮磨床开放式数控系统为目标，涉及硬件、软件设计两个方面，侧重数控系统的软件设计。
Aimed at developing open architecture CNC system for CAM grinder, the design of hardware and software is included and the software design is the focus in this paper.
提出了一种以PMAC运动控制器为控制系统核心、工业控制机为系统支撑单元的双cpu开放式数控系统。
An open CNC system with two CPUs in parallel, in which the center is PMAC motion controller and the supporting element is industrial PC, is suggested.
对数控加工程序编辑模块开发的研究，可减轻对数控系统开发的工作量，为构建开放式数控系统提供通用模块。
All research is helpful to reduce CNC system developing work and provides universal part to build open CNC system.
论文阐述了在基于运动控制卡的开放式数控系统中如何利用MA TLAB引擎接口技术来加入模糊控制的方法。
A method of how to use MATLAB Engine interface technology to add Fuzzy control in the Open CNC system based on the motion controller is introduced in this paper.
最后，我们完成了运动控制器驱动程序和开放式数控系统应用程序的开发工作，并在实际应用中取得了满意的效果。
At last, the development of motion controller driver software and host application program is finished, and the results of the applied experiments show the CNC software system is satisfactory.
最后，我们完成了运动控制器驱动程序和开放式数控系统应用程序的开发工作，并在实际应用中取得了满意的效果。
At last, the development of motion controller driver software and host application program is finished, and the results of the applied experiments show the CNC software system is satisfactory.
应用推荐