科学家们指的是MonteCarlo模拟法，它是一种用于建立概率(或者说“随机”)系统模型，并计算出某些结果出现概率的统计方法。
The scientists are referring to Monte Carlo simulations, a statistical technique used to model probabilistic (or "stochastic") systems and establish the odds for a variety of outcomes.
结果表明，本文建立的分区交界面数值计算模型是可靠的，可用于处理几何形状复杂的流场模拟。
The result shows that the numerical calculation model of interface of block-structured grids in reliable and can be used for complex geometry shape.
为了建立发动机数学模型和验证CRUISE软件模拟计算的精度，分别做了发动机稳态试验和整车性能试验。
The engine stable experiment and passenger car road test were done in order to build the engine model and testify the accuracy of the simulation by CRUISE.
通过实验和单因素分析法对所建立的车辆振动模型的正确性及模拟计算程序的有效性进行了验证。
The validity of the vehicle vibration models that are set up and of the vehicle vibration simulation calculation procedure are validated by experiment and the single factor analytic approach.
通过变异函数的计算和模拟，建立了矿床的理论变异函数模型。
By the calculation and simulation of Variogram, to build the theoretical model of Variogram of the ore-body.
计算和验证表明：建立的弯道水流数学模型能较好地模拟弯道水面形态变化和流速重分布。
The calculated results show that the established mathematical model can satisfactorily simulate the variation of water surface pattern and redistribution of velocity in bend flow.
以aspenPLUS软件为平台，用神经网络对急冷系统进行了严格模拟，建立了神经网络模型，可用于急冷系统简单的模拟计算。
With ASPEN PLUS software, the paper simulates the quench system by neural networks, constructs the NN model to complete the simple simulation and calculation of the quench system.
通过对塑件工艺分析的人工神经网络模拟，建立了可供工艺优化计算的数学模型。
And the mathematical model for the calculation of the technological process optimization was built through artificial neural net simulation of the technological analysis of the plastic part.
首次在锤击消除焊接应力的数值模拟研究中，采用接触单元技术建立有限元模型模拟计算锤击作用。
In the numerical simulation of relieving residual stress by hammer peening, contact element technique was firstly adopted for establishing the finite model and calculating the hammer peening.
系统地完成了核测井中粒子随机游动的数学模型的建立和计算机模拟过程的实现。
A mathematical model is systematically accomplished and computer simulation of particles random moving for the neutron well logging is done.
建立了精镗孔挤压液膜阻尼减振系统的动力学模型，运用MATLAB语言编程，对精镗孔挤压液膜阻尼减振系统进行了模拟计算分析。
Setting up a dynamics model of damping system of damper, and programming with the MATLAB language to calculate and analyze the damping system.
建立了扬水曝气器上升流速数学模型，用于模拟计算扬水曝气器的提水能力。
A model of flow velocity was built up for simulating of the flow rate in the water-lifting aerator.
本文针对巨型结构体系，建立了巨型结构模拟施工过程的力学模型及计算方法。
In this paper, a mechanics model and a computing model which simulating construction process are presented for mega-frame structure.
借助于工件磨削区域的分割和砂轮表面的离散化处理，建立了一种新的内圆磨削模拟计算模型。
A new analogue analysis model on the inner circle grinding is set by meshing the grinding area of work-piece surface.
较为详细地论述了水平井油-水两相渗流数学模型的建立，数值求解方法以及模拟计算机软件的研制和应用。
Establishment of a finite element mathematical model for the flow, its numerical solution, the associated computer program and the application are presented in detail.
在分析模拟的基础上，建立浙江杨梅单产模拟预测的计算机模型，初步开发了浙江杨梅产量预报系统。
On the basis of the analysis, a simulation model of the waxberry yield was constructed, and the system of waxberry yield forecasting was developed.
通过有限元模拟计算，建立了1-3型压电复合材料的振动模型，得到了与实验结果相吻合的研究结论。
Vibration mode of 1-3 piezoelectric composites was built and calculated by finite element method, and the results was consistent with the experimental result.
针对我国多水平开采矿井的实际情况，建立了具有两级缓冲仓柔性连接运输系统可靠性的计算机模拟模型。
In view of real situations in multi level underground mines, a computer simulation model of reliability of mining haulage system with two ore bins has been established.
建立了电还原脉冲柱分离铀钚的模拟计算模型，提出了该模型的数值计算算法。
The computer simulation model for the separation of uranium and plutonium using the electro reduction pulsed column was established.
进而建立流体均布模型，利用计算机模拟，研究分析使流体均匀分布所需的集管阻力特征。
Through computer's simulation, Research and analysis resistance characteristic that the flow equal distribution model needs.
建立计算模型进行理论分析和数值模拟分析。
Building compute model, theory and number analysis is carried on.
在文中分别对细菌信息通讯中的群体感应、介质中激发波的传播、鱼群高度趋向游动和蚁群最短寻食路径的动力学行为建立了模型，并进行了计算机模拟。
The model that we have established in my paper is about Bacterial communication, the diffusion of excitation wave in medium, the dynamic behavior of fish and ant, which are all simulated on computer.
利用所建立的数学模型，采用计算机模拟的方法，得到了主要参数间的静态关系曲线，并分析了系统动态特性。
A static relations curve of the main movement parameter is given by means of computer simulation and by an established mathematical model, and the system dynamic characteristic analyzed.
结果表明，本文建立的质量消光系数计算数学模型可用于预估红外烟幕遮蔽性能，而且模拟结果与实验结果基本吻合。
The results indicate that maths-model can beforehand shield performance of ir smoke, and some of results are confirmed by experiment, the experiment results are according with simulated results.
量子器件模型的建立与计算机模拟对于实验有着重大的指导意义。
The formulation of quantum devices model and its computational simulation have important significance of guidance.
粗糙表面的计算机模拟是建立粗糙表面模型进而对粗糙表面间相互作用进行模拟研究的前提。
To simulate the roughness surface is the pre-condition that builds the roughness model and simulates the interaction of two contacted surface.
建立了沉降室除尘效率的统计模型，并介绍了计算机模拟计算的方法。
The statistic model of the dusting efficiency for the sedimentation chamber is established. The computational method of the computer simulation is introduced.
利用建立的数学模型，模拟计算浸没范围，并设置排水沟边界模拟排水效果。
The proposed model is applied to simulate the submerged range and the drainage effect by setting the drainage boundaries.
初步建立了超低空空投过程的计算模型，计算模拟了实际的典型空投条件及空投过程。
The computational model of the airdrop process was developed, and the typical conditions of real airdrop and its process were simulated.
初步建立了超低空空投过程的计算模型，计算模拟了实际的典型空投条件及空投过程。
The computational model of the airdrop process was developed, and the typical conditions of real airdrop and its process were simulated.
应用推荐