可能需要进行散热,结构和机械完整性建模与分析,以便预测和优化系统性能。
May be required to perform thermal, structural and mechanical integrity modeling and analysis to predict and optimize the system performance.
现代决策技术是集成系统建模、统计分析、优化理论与计算机科学等理论和方法的一门综合性应用学科。
Modern DM techniques have developed into a comprehensive integration of the theories and methods of System Modeling, Statistics Analysis, Optimization Theory, and Computer Science, etc.
并用非均匀采样系统建模及优化方法对实际病例进行参数估计和分析。
Some nonuniform sampling methods of modelling with optimizing are applied to estimate system parameters and analyse some practical cases.
本文建议一种开关调节系统控制回路参数最优化的建模和设计方法。
A new modeling and design method for the parameter optimization of the feedback control loop of switching regulators is presented.
IC CD相机建模是该相机图像模拟和改进相机设计、系统性能优化需要解决的重要问题。
The modeling of ICCD camera is an important problem to simulate image of ICCD camera, optimize the design and improve system capability.
使用建模技术,系统分析设计更优化和科学。
Utilizing the modeling technique, the system analysis and design are better in optimizing and rationalizing.
建立电梯群控系统的算法调度方案优化与数学建模,使之尽可能地满足电梯乘客的满意度和减少电梯的能源损耗以满足企业的满意度。
Corresponding with the passengers demand and minimum energy wastage, the control arithmetic and the optimized maths for the attemper scheme in the elevator group-controled system are set up.
铁路机车车辆虚拟样机系统为产品设计和生产过程的优化提供了集成的建模和仿真环境。
The virtual prototype system of railway locomotives and vehicles provides a modeling and simulation environment for optimization of product design and production process.
因此,研究基于现代优化技术的系统建模方法和控制器参数整定技术具有重要的意义。
Therefore, research on the method of system modeling and controller parameters tuning is very important.
从工程模型的一般概念入手,以系统优化设计为目标,重点讨论了模型的分类、建模方法和系统的设计过程。
With the aim of optimal system design, the article discusses the model classification, the modeling method and the system design process on the basis of general conception of engineering model.
运用排队论的理论和方法对由机要保障装备构成的随机服务系统进行建模和优化。
In this article, Queuing theory and method is applied to modeling and optimization of a stochastic service system which consists of security equipments.
的建模的风力涡轮机的风能转换系统的控制和优化的基础上。
The modeling of the wind turbine is the base of the control and optimization of the wind energy conversion system.
本项研究有利于促进和深化建模与模型管理的类人化、智能化研究,在动态系统的实时优化控制领域具有较广阔的应用前景。
Modeling and model management have been further studied with anthropoid and intellectualization, and will be used widely in real time optimal control of dynamic system.
结合上述过程,本文重点讨论了面向复杂系统仿真的多方法建模框架、仿真实验设计的原则与方法和仿真评估分析优化方法。
Hence, the paper principally discusses multi-modeling framework for complex system simulation, principles and methods for simulation experiment design and simulation assessment methods.
通过管理优化保证航行安全和防止海洋污染,并运用系统工程方法探讨现代轮机管理系统的建模。
The management is optimized to ensure safe navigation and prevent ocean from pollution, and the method of the system engineering is used to establish a model of modern Marine engineering management.
研究了灰色系统理论与神经网络组合的灰色神经网络GNNM(1,1)模型的建模思想、网络结构及其优化GNNM(1,1)模型的方法和学习算法;
Study modelling thought, network configuration, majorize GNNM(1,1) mode method and learning algorithm of GNNM(1,1) mode combined grey system theory and neural network.
并对大型400MW级IGCC电站系统进行模块化建模和模拟分析,总结和揭示了IGCC蒸汽系统综合优化规律,得出若干有实用参考价值的结论。
The modular modeling and performance analysis about the 400 MW IGCC system case have been completed, the rules of synthesis optimization of steam system disclosed, and many valuable conclusions shown.
基于分布式交互仿真的视景仿真系统,对仿真结点的图形和网络处理能力提出较高的要求,需要在建模和算法上进行优化。
The visual simulation based on DIS raises a high demand on the graphics and the net processing ability of the simulation nodes, thus optimization in the modeling and choice of algorithms are required.
然后结合该压印机构的具体仿真情况对ADAMS进行了二次开发,形成了一个自动建模和仿真系统,便捷地得出了控制连杆的优化解。
Then, combined with the condition of the simulation, made continued development, formed an automatic modeling and simulation system , and got the optimum solution of the control_link easily.
本文介绍了系统实现的框架和技术流程,并对实现过程中的场景建模技术、交互设计中的图形化设计方法以及场景优化技术做了深入阐述。
This paper gives a whole illustrate in system's structure and the technical implementation process, and details in the modeling technology, interactive graphic design and optimization technology.
综合运用多元分析、系统辨识和多目标优化等理论,提出静态系统的建模与决策通用方法。
With such theories and methods as multivariable analysis system identification and multiobject optimization applied to. a current method is developed set up static-system models with decision making.
循环流化床锅炉燃烧系统的数值模拟和机理建模涉及到对气固两相流方式下燃烧过程的理解和描述,已有的机理模型都十分复杂,不适合用于现场控制系统设计和优化。
For the numerical simulation and mechanism modeling of combustion system involve the gas-solid flow principle, existing models are to complex to be suitable for design and optimizing of CFB unit.
循环流化床锅炉燃烧系统的数值模拟和机理建模涉及到对气固两相流方式下燃烧过程的理解和描述,已有的机理模型都十分复杂,不适合用于现场控制系统设计和优化。
For the numerical simulation and mechanism modeling of combustion system involve the gas-solid flow principle, existing models are to complex to be suitable for design and optimizing of CFB unit.
应用推荐