还介绍了岩体应力测量在一些矿山的应用。
Practical applications of rock stress measurements at several mines are also DE - scribed.
本文简要介绍了地应力测量的主要方法和成果。
The authors present the main methods and results of in situ stress measurements.
应力测量表明现今该带的应力场为向北西挤压。
Stress measurements indicate that the present stress field of the zone is still subjected to NW compression.
根据该区原地应力测量资料反演了区域应力场方向。
By inversion of the data of in-situ stress measurements the direction of regional stress has been obtained.
本文介绍了砚北煤矿地应力测量的方法、过程和结果。
This paper mainly introduces the method, the procedure and the result of the in situ stress measurement of Yanbei coal mine.
在深层地应力测量中, 水压致裂法是最有效的测量方法。
The hydrofracturing technique is the most effective measuring method in the geostress measurement in deep stratum.
秦岭特长隧道地区采用水压致裂法进行了深钻孔的应力测量。
The measurements of ground stresses by using the hydraulic cracking method within the deep boreholes were proceeded at the Qinling extra long tunnel district.
本文报道了应力测量专用中子衍射谱仪的部分模拟和优化工作。
A part of the simulation and optimization results on the Neutron Diffractometer for Strain Measurements is introduced in this paper.
本文介绍了地应力测量所使用的测量方法、测量过程和测量结果。
This paper introduces the method, process and results of the in-situ stress measurement.
为此,本文讨论了地应力测量及其地下工程应用值得注意的问题。
Therefore, this paper has discussed the items needed to pay attention before and after crustal stress measuring.
SOC模型建议局部地区的应力测量数据可能并非代表全球的情况。
SOC models suggest that local stress measurements may not be representative of the global organization.
本文给出了埋入式进气道内湍流流场的雷诺应力测量和频谱分析结果。
The results of the measurement of Reynolds stresses and spectral analysis for a turbulent flow in a submerged air intake are presented in this paper.
结合X射线应力测量原理,建立出基体承载系数的X射线应力测量方法。
By using the principle of X ray stress measurement, the bearing stress factors of matrix in composites was measured.
自1998年8月起,新疆地区开展土层钻孔应力测量,先后建成7个台。
Since August, 1998, Xinjiang area began the measure of soil layer bore stress. It was successively completed 7 stations.
采用钻孔套芯应力解除法在赵楼煤矿井底车场位置选点进行了地应力测量。
In-situ stress was measured by overcoming method in borehole in Zhaolou Coal Mine shaft station.
论文对超声螺栓应力测量原理,超声螺栓紧固力测试仪设计进行了系统研究。
The thesis lucubrated the principle of ultrasonic bolt tension measurement and design of ultrasonic bolt tension measurement instrument.
微观内应力测量采用了线形近似函数法,宏观内应力测量采用了线形质心法。
The line-shaped approximate function technique is used for macro-stress measurement, whereas the line-shaped mass core technique for micro-stress measurement.
通过对淬火试件进行金相组织分析和残余应力测量,验证了数值模拟的可行性。
Through the microstructure analysis and residual stress measurement on a quenching test-piece, the feasibility of the numerical simulation is proved.
基于X射线应力测量原理,建立了一种双相材料相间内应力的测量与表征方法。
Based on the theory of X-ray stress measurement, a method of measurement and representation for the inter-phase stress of double-phase material was established.
介绍了对某水力压裂法处置中放废液工程进行的深层地下地应力测量的有关情况。
The in situ measurement of the crustal stress at great depth was conducted in the medium level waste disposal field.
闭合应力测量的错误会对净压估计,以及随后的断裂几何形状的估计造成严重的错误。
An error in closure stress measurement can lead to a significant error in the estimation of the net pressure and, consequently, the fracture geometry.
本文对某一型号民用柴油机机体安装应力和静态应力测量及疲劳试验进行了分析研究。
This article analyse a type of civil diesel engine block assembling stress measurement, static stress measurement and fatigue test.
混凝土内部应力测量关键在于应力应变转换,而应力应变转换关键在于徐变系数的识别。
The key to concrete stress measure is the translation from strain to stress. And the transition 's key is the identification of creep factor.
根据预拉伸铝合金厚板的特点,运用弹性力学理论推导出厚板内部残余应力测量的新方法。
According to the characteristics of the thick pre-stretched aluminum alloy plate, a new method of measuring the residual stresses in thick plate is deduced by the elastic mechanical theory.
采用计算机辅助测试技术使接触应力测量具有全场、静动态测试、高度数据自动化等优点。
The advantages of this technique are full field, both static and dynamic measurements, automatic data processing.
现场应用证明,该系统工作稳定、可靠,操作简便,为水轮机叶片应力测量创造了有利条件。
The practice used in this field has proved that this system operated is stably, safely and controlling conveniently. It creates a useful condition for stresses measurement of hydraulic turbine blades.
阐述了通过建立现今地质构造模型、地应力测量和数值计算确定煤层及围岩原岩应力的方法。
The author expatiated the methods that confirm initial stress in coal seams and wall rocks by setting up present geological structure's model and using geo-stress survey and numerical calculation.
此外还介绍了用两种三轴应变计进行岩体应力测量的结果以及能考虑自重边界元法的实际应用。
Results of measurements on rock mass stresses by two kinds of triaxial strain cells are reported. Finally the possible applications of BEM with gravity are discussed.
声发射技术在无损检测、地震预测、混凝土结构检测、应力测量、微位移测量等领域应用很广泛。
Acoustic emission technology has been used in non-destructive testing, earthquake forecast, concrete monitoring, stress measurement, tiny displacement measurement and so on.
为了解矿区应力状态及分布特征,开展了应力实测工作,应用空心包体应力解除法进行应力测量。
For understanding the state and distribution of stresses in the mine, in-situ stress measurement is carried out by means of hollow inclusion gauge method.
应用推荐